[PATCH 2/3] doc: sl-mx8mm: Remove ATF_LOAD_ADDR export

[Patrick Wildt]

On Wed, Jan 12, 2022 at 05:49:45PM -0300, Fabio Estevam wrote:
> imx8mm-u-boot.dtsi passes the ATF load address via the
> 'entry' and 'load' properties.
> 
> Remove the step that performs the ATF_LOAD_ADDR export, which is
> now unneeded.
> 
> Signed-off-by: Fabio Estevam <festevam at denx.de>

Reviewed-by: Patrick Wildt <patrick at blueri.se>


> ---
>  doc/board/kontron/sl-mx8mm.rst | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/doc/board/kontron/sl-mx8mm.rst b/doc/board/kontron/sl-mx8mm.rst
> index 74ff228f2038..7a4c1134b54d 100644
> --- a/doc/board/kontron/sl-mx8mm.rst
> +++ b/doc/board/kontron/sl-mx8mm.rst
> @@ -62,7 +62,6 @@ Build U-Boot
>  .. code-block:: bash
>  
>     $ make kontron-sl-mx8mm_defconfig
> -   $ export ATF_LOAD_ADDR=0x920000
>     $ make
>  
>  Burn the flash.bin to SD card at an offset of 33 KiB:
> -- 
> 2.25.1
>