[PATCH] Revert "net: gem: Disable broadcast setting"
Michal Simek
monstr at monstr.eu
Mon Jan 17 10:02:15 CET 2022
pá 14. 1. 2022 v 13:15 odesílatel Michal Simek <michal.simek at xilinx.com> napsal:
>
> This reverts commit eafdcda4a854932c0319656de7bf3f017f17ae67.
>
> The main reason is that QEMU is using BOOTP protocol which is sending DHCP
> Offer to a broadcast address that's why it can't be disabled.
> DHCP protocol has no issue because it returns directly to client MAC
> address.
> Both of these options are described in RFC951
> (https://datatracker.ietf.org/doc/html/rfc951#section-4)
>
> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
> ---
>
> drivers/net/zynq_gem.c | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
> index f238811786c6..3118d1472669 100644
> --- a/drivers/net/zynq_gem.c
> +++ b/drivers/net/zynq_gem.c
> @@ -62,7 +62,6 @@
> #define ZYNQ_GEM_NWCFG_SPEED100 0x00000001 /* 100 Mbps operation */
> #define ZYNQ_GEM_NWCFG_SPEED1000 0x00000400 /* 1Gbps operation */
> #define ZYNQ_GEM_NWCFG_FDEN 0x00000002 /* Full Duplex mode */
> -#define ZYNQ_GEM_NWCFG_NO_BRDC BIT(5) /* No broadcast */
> #define ZYNQ_GEM_NWCFG_FSREM 0x00020000 /* FCS removal */
> #define ZYNQ_GEM_NWCFG_SGMII_ENBL 0x08000000 /* SGMII Enable */
> #define ZYNQ_GEM_NWCFG_PCS_SEL 0x00000800 /* PCS select */
> @@ -80,7 +79,6 @@
>
> #define ZYNQ_GEM_NWCFG_INIT (ZYNQ_GEM_DBUS_WIDTH | \
> ZYNQ_GEM_NWCFG_FDEN | \
> - ZYNQ_GEM_NWCFG_NO_BRDC | \
> ZYNQ_GEM_NWCFG_FSREM | \
> ZYNQ_GEM_NWCFG_MDCCLKDIV)
>
> --
> 2.34.1
>
applied.
M
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
More information about the U-Boot
mailing list