[PATCH 00/25] SIERRA: Add support for MultiLink
Aswath Govindraju
a-govindraju at ti.com
Thu Jan 27 10:12:43 CET 2022
The following series of patches,
- add support for MultiLink on Sierra SerDes
- Also adds the required to configs, dt node changes
to enable this on J721e common processor board.
Notes:
- Patches 1, 2, 3, 4, 5, 6, 7, 8, 13, 14, 15, 16, 17,
18, 19, 20, 21 and 22 are ported from upstream kernel
v5.17-rc1
- Patch 24, syncs with linux kernel dt, with the following patch
https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=608996
Aswath Govindraju (8):
phy: cadence: Sierra: Add a UCLASS_PHY device for links
phy: cadence: Sierra: Model PLL_CMNLC and PLL_CMNLC1 as a clock
phy: ti: phy-j721e-wiz.c: Fix the condition for setting P_ENABLE_FORCE
board: ti: j721e: evm.c: Add support for probing SerDes0
arm: dts: k3-j721e: Add support for PLL_CMNLC clocks in SerDes0
phy: cadence: Sierra: Add support for skipping configuration
arm: dts: k3-j721e: Add support for multilink PCIe + QSGMII
include: configs: j721e_evm: Add support to boot ethfw core in j721e
Kishon Vijay Abraham I (6):
phy: cadence: Sierra: Fix PHY power_on sequence
phy: cadence: Sierra: Create PHY only for "phy" or "link" sub-nodes
phy: cadence: Sierra: Move all clk_get_*() to a separate function
phy: cadence: Sierra: Move all reset_control_get*() to a separate
function
phy: cadence: Sierra: Add array of input clocks in "struct
cdns_sierra_phy"
phy: cadence: Sierra: Add missing clk_disable_unprepare() in .remove
callback
Sanket Parmar (1):
phy: cadence: sierra: Fix for USB3 U1/U2 state
Swapnil Jakhade (10):
phy: cadence: Sierra: Prepare driver to add support for multilink
configurations
dt-bindings: phy: cadence-sierra: Add binding to specify SSC mode
phy: cadence: Sierra: Add support to get SSC type from device tree.
phy: cadence: Sierra: Rename some regmap variables to be in sync with
Sierra documentation
phy: cadence: Sierra: Add PHY PCS common register configurations
phy: cadence: Sierra: Check cmn_ready assertion during PHY power on
phy: cadence: Sierra: Check PIPE mode PHY status to be ready for
operation
phy: cadence: Sierra: Update single link PCIe register configuration
phy: cadence: Sierra: Add support for PHY multilink configurations
phy: cadence: Sierra: Add PCIe + QSGMII PHY multilink configuration
.../k3-j721e-common-proc-board-u-boot.dtsi | 15 +
arch/arm/dts/k3-j721e-common-proc-board.dts | 14 +-
.../arm/dts/k3-j721e-r5-common-proc-board.dts | 32 +
board/ti/j721e/evm.c | 37 +
configs/j721e_evm_a72_defconfig | 2 +-
drivers/phy/cadence/phy-cadence-sierra.c | 1536 +++++++++++++++--
drivers/phy/ti/phy-j721e-wiz.c | 2 +-
include/configs/j721e_evm.h | 19 +-
include/dt-bindings/phy/phy-cadence.h | 4 +
9 files changed, 1493 insertions(+), 168 deletions(-)
--
2.17.1
More information about the U-Boot
mailing list