[PATCH] stm32prog: add partition name in treat_partition_list error messages

[Patrick Delaunay]

Add the partition name and remove the line number in error messages
of treat_partition_list() to provide correct information to user of
STM32CubeProgrammer.

The "line number" value was confusing because it is incorrect here;
the index in  part_array[] is not aligned with the line number in
the parsed Layout file, because the empty lines and the lines beginning
by '#' are skipped during the first parsing in parse_flash_layout().

Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
---

 arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
index 3b6ca4e773..61cba157fd 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
+++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
@@ -835,8 +835,8 @@ static int treat_partition_list(struct stm32prog_data *data)
 		/* skip partition with IP="none" */
 		if (part->target == STM32PROG_NONE) {
 			if (IS_SELECT(part)) {
-				stm32prog_err("Layout: selected none phase = 0x%x",
-					      part->id);
+				stm32prog_err("Layout: selected none phase = 0x%x for part %s",
+					      part->id, part->name);
 				return -EINVAL;
 			}
 			continue;
@@ -844,14 +844,14 @@ static int treat_partition_list(struct stm32prog_data *data)
 
 		if (part->id == PHASE_FLASHLAYOUT ||
 		    part->id > PHASE_LAST_USER) {
-			stm32prog_err("Layout: invalid phase = 0x%x",
-				      part->id);
+			stm32prog_err("Layout: invalid phase = 0x%x for part %s",
+				      part->id, part->name);
 			return -EINVAL;
 		}
 		for (j = i + 1; j < data->part_nb; j++) {
 			if (part->id == data->part_array[j].id) {
-				stm32prog_err("Layout: duplicated phase 0x%x at line %d and %d",
-					      part->id, i, j);
+				stm32prog_err("Layout: duplicated phase 0x%x for part %s and %s",
+					      part->id, part->name, data->part_array[j].name);
 				return -EINVAL;
 			}
 		}
-- 
2.25.1