[PATCH v2 25/25] include: configs: j721e_evm: Add support to boot ethfw core in j721e
Aswath Govindraju
a-govindraju at ti.com
Fri Jan 28 09:11:52 CET 2022
Add configs to enable booting ethfw core in j721e
Signed-off-by: Aswath Govindraju <a-govindraju at ti.com>
---
configs/j721e_evm_a72_defconfig | 2 +-
include/configs/j721e_evm.h | 19 ++++++++++---------
2 files changed, 11 insertions(+), 10 deletions(-)
diff --git a/configs/j721e_evm_a72_defconfig b/configs/j721e_evm_a72_defconfig
index 2e452739034e..8f412d65a8ac 100644
--- a/configs/j721e_evm_a72_defconfig
+++ b/configs/j721e_evm_a72_defconfig
@@ -29,7 +29,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
# CONFIG_USE_SPL_FIT_GENERATOR is not set
-CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd; run init_${boot}; run boot_rprocs; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern"
+CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd; run init_${boot}; run main_cpsw0_qsgmii_phyinit; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern"
CONFIG_LOGLEVEL=7
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h
index abea7517e8b5..627c363ce66e 100644
--- a/include/configs/j721e_evm.h
+++ b/include/configs/j721e_evm.h
@@ -119,6 +119,16 @@
/* Set the default list of remote processors to boot */
#if defined(CONFIG_TARGET_J721E_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM)
+#define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY \
+ "dorprocboot=1\0" \
+ "do_main_cpsw0_qsgmii_phyinit=1\0" \
+ "init_main_cpsw0_qsgmii_phy=gpio set gpio at 22_17;" \
+ "gpio clear gpio at 22_16\0" \
+ "main_cpsw0_qsgmii_phyinit=" \
+ "if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && " \
+ "test ${boot} = mmc; then " \
+ "run init_main_cpsw0_qsgmii_phy;" \
+ "fi;\0"
#ifdef DEFAULT_RPROCS
#undef DEFAULT_RPROCS
#endif
@@ -136,15 +146,6 @@
#endif /* CONFIG_TARGET_J721E_A72_EVM */
#ifdef CONFIG_TARGET_J7200_A72_EVM
-#define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY \
- "do_main_cpsw0_qsgmii_phyinit=1\0" \
- "init_main_cpsw0_qsgmii_phy=gpio set gpio at 22_17;" \
- "gpio clear gpio at 22_16\0" \
- "main_cpsw0_qsgmii_phyinit=" \
- "if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && " \
- "test ${boot} = mmc; then " \
- "run init_main_cpsw0_qsgmii_phy;" \
- "fi;\0"
#define DEFAULT_RPROCS "" \
"2 /lib/firmware/j7200-main-r5f0_0-fw " \
"3 /lib/firmware/j7200-main-r5f0_1-fw "
--
2.17.1
More information about the U-Boot
mailing list