mkimage_fit_atf.sh: not found

[Fabio Estevam]

HI Tim,

On Tue, Jan 4, 2022 at 7:48 PM Tim Harvey <tharvey at gateworks.com> wrote:
>
> Stefano and Fabio,
>
> I'm seeing the imx8mm_venice_defconfig target failing to build on
> master due to mkimage_fit_atf.sh not found:
> ./"arch/arm/mach-imx/mkimage_fit_atf.sh" \
> arch/arm/dts/imx8mm-venice-gw71xx-0x.dtb
> arch/arm/dts/imx8mm-venice-gw72xx-0x.dtb
> arch/arm/dts/imx8mm-venice-gw73xx-0x.dtb
> arch/arm/dts/imx8mm-venice-gw7901.dtb
> arch/arm/dts/imx8mm-venice-gw7902.dtb > u-boot.its
> /bin/sh: 1: ./arch/arm/mach-imx/mkimage_fit_atf.sh: not found
>
> As far as I can tell the other boards that are still using
> SPL_FIT_GENERATOR also fail due to this (ie imx8mm_beacon_defconfig,
> imx8mq_evk_defconfig, imx8mm-icore-mx8mm-edimm2.2_defconfig, etc).
>
> What is the state of the binman conversion? I submitted a series to
> convert my boards to binman and it has just been sitting without any
> response for months now [1].
>
> I'm not sure when the above breakage occurred but the conversion to
> binman resolves it and other things.
>
> Please let me know what you expect me to do to resolve this as there
> is a release pending.
>
> Best regards,
>
> Tim
> [1] https://patchwork.ozlabs.org/project/uboot/patch/20211006201700.3018-1-tharvey@gateworks.com/

Stefano is on vacation. Tom, would you mind picking Tim's series?

Thanks