[PATCH 2/2] udoo: neo: Do not print the Model information

[Fabio Estevam]

Hi Tommaso,

On Wed, Jan 5, 2022 at 5:47 PM Tommaso Merciai <tomm.merciai at gmail.com> wrote:

> Hi Fabio,
> Thanks, I test your patch on basic and extended model. Below some logs
> seems all work properly. I hope I helped the cause :)

Yes, thanks a lot!

>  - BASIC log:
> -------------------------------------------------------------------------
> U-Boot 2022.01-rc4-00034-g19f31e718f-dirty (Jan 05 2022 - 21:38:32 +0100)
>
> CPU:   Freescale i.MX6SX rev1.2 996 MHz (running at 792 MHz)
> CPU:   Extended Commercial temperature grade (-20C to 105C) at 32C
> Reset cause: POR
> Model: UDOO Neo Basic

I assume you have only applied 1/2 and not 2/2.

With 2/2 applied the Model line should not be printed.

Thanks