[PATCH 2/2] udoo: neo: Do not print the Model information

[Tommaso Merciai]

On Mon, Jan 03, 2022 at 12:15:12PM -0300, Fabio Estevam wrote:
> By default the Model information from DT is printed:
> 
> CPU:   Freescale i.MX6SX rev1.2 996 MHz (running at 792 MHz)
> CPU:   Extended Commercial temperature grade (-20C to 105C) at 63C
> Reset cause: POR
> Model: UDOO Neo Basic
> Board: UDOO Neo FULL
> I2C:   ready
> 
> As the udoo basic DT is used, such output may be confusing.
> 
> Improve it by only printing the Board model instead, which is
> read from the board identification GPIOs.

Hi Fabio,
Thanks, I test your patch on basic and extended model. Below some logs
seems all work properly. I hope I helped the cause :)

 - BASIC log:
-------------------------------------------------------------------------
U-Boot 2022.01-rc4-00034-g19f31e718f-dirty (Jan 05 2022 - 21:38:32 +0100)

CPU:   Freescale i.MX6SX rev1.2 996 MHz (running at 792 MHz)
CPU:   Extended Commercial temperature grade (-20C to 105C) at 32C
Reset cause: POR
Model: UDOO Neo Basic
Board: UDOO Neo BASIC
I2C:   ready
DRAM:  512 MiB
PMIC:  PFUZE3000 DEV_ID=0x30 REV_ID=0x11
MMC:   FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Net:   eth0: ethernet at 2188000 [PRIME]
Hit
--------------------------------------------------------------------------

 - EXTENDED LOG:
--------------------------------------------------------------------------
U-Boot 2022.01-rc4-00034-g19f31e718f-dirty (Jan 05 2022 - 21:38:32 +0100)

CPU:   Freescale i.MX6SX rev1.2 996 MHz (running at 792 MHz)
CPU:   Extended Commercial temperature grade (-20C to 105C) at 42C
Reset cause: POR
Model: UDOO Neo Basic
Board: UDOO Neo EXTENDED
I2C:   ready
DRAM:  1 GiB
PMIC:  PFUZE3000 DEV_ID=0x30 REV_ID=0x11
MMC:   FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Net:   
Error: ethernet at 2188000 address not set.
No ethernet found.

Hit any key to stop autoboot:  0
----------------------------------------------------------------------------

Acked-by: Tommaso Merciai <tomm.merciai at gmail.com>
Tested-by: Tommaso Merciai <tomm.merciai at gmail.com>

Tommaso

> 
> Signed-off-by: Fabio Estevam <festevam at gmail.com>
> ---
> This applies on top of Peter's series:
> https://lore.kernel.org/all/20211221123249.455347-1-pbrobinson@gmail.com/T
> 
>  board/udoo/neo/neo.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/board/udoo/neo/neo.c b/board/udoo/neo/neo.c
> index 0c0d3f615d18..da6a0b4e9247 100644
> --- a/board/udoo/neo/neo.c
> +++ b/board/udoo/neo/neo.c
> @@ -350,7 +350,8 @@ static char *board_string(int type)
>  	return "UNDEFINED";
>  }
>  
> -int checkboard(void)
> +/* Override the default implementation, DT model is not accurate */
> +int show_board_info(void)
>  {
>  	int *board_type = (int *)OCRAM_START;
>  
> -- 
> 2.25.1
>