[PATCH v2 0/4] QEMU spike machine support for U-Boot

[Anup Patel]

We can use same U-Boot binary compiled using qemu-riscv64_smode_defconfig
on QEMU virt machine and QEMU spike machine. To achieve this, we need HTIF
console support for U-Boot QEMU RISC-V board hence this series.

To test this series with latest OpenSBI, we can use the following command:
qemu-system-riscv64 -M spike -m 256M -display none -serial stdio \
-bios opensbi/build/platform/generic/firmware/fw_jump.bin -kernel \
./u-boot/u-boot.bin

These patch can be found in qemu_riscv_htif_v2 branch at:
https://github.com/avpatel/u-boot.git

Changes since v1:
 - Use ofnode_by_compatible() in PATCH3
 - Updated QEMU RISC-V documentation in PATCH4

Anup Patel (4):
  serial: Add RISC-V HTIF console driver
  riscv: qemu: Enable HTIF console support
  riscv: qemu: Implement is_flash_available() for MTD NOR
  doc: qemu-riscv: Update documentation for QEMU spike machine

 board/emulation/qemu-riscv/Kconfig      |   1 +
 board/emulation/qemu-riscv/qemu-riscv.c |  12 ++
 doc/board/emulation/qemu-riscv.rst      |  48 ++++---
 drivers/serial/Kconfig                  |   8 ++
 drivers/serial/Makefile                 |   1 +
 drivers/serial/serial_htif.c            | 178 ++++++++++++++++++++++++
 6 files changed, 232 insertions(+), 16 deletions(-)
 create mode 100644 drivers/serial/serial_htif.c

-- 
2.25.1