[PATCH] arm: kirkwood: GoFlex Home : Use Marvell uclass mvgbe and PHY driver for Ethernet

Tony Dinh mibodhi at gmail.com
Wed Jan 26 04:33:44 CET 2022


The GoFlex Home board has the network chip Marvell 88E1116R.
Use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet.

- Currently, CONFIG_RESET_PHY_R symbol is used in
arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
boards with mv8831116 PHY, with each board defines the function
reset_phy(). Undefine it for this board.
- Add board_eth_init() to use uclass mvgbe to bring up the network.
And remove ad-hoc code.
- Enable CONFIG_PHY_MARVELL to properly configure the network.
- Miscellaneous changes: use CONFIG_SYS_THUMB_BUILD to keep u-boot image
under 512K, use BIT macro, and cleanup comments.

Signed-off-by: Tony Dinh <mibodhi at gmail.com>
---

 board/Seagate/goflexhome/goflexhome.c | 84 ++++-----------------------
 configs/goflexhome_defconfig          |  2 +
 include/configs/goflexhome.h          | 32 +++-------
 3 files changed, 22 insertions(+), 96 deletions(-)

diff --git a/board/Seagate/goflexhome/goflexhome.c b/board/Seagate/goflexhome/goflexhome.c
index 52be64fb8c..caea89c10e 100644
--- a/board/Seagate/goflexhome/goflexhome.c
+++ b/board/Seagate/goflexhome/goflexhome.c
@@ -1,10 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Copyright (C) 2021
- * Tony Dinh <mibodhi at gmail.com>
- * Suriyan Ramasami <suriyan.r at gmail.com>
- *
- * Copyright (C) 2013 Suriyan Ramasami <suriyan.r at gmail.com>
+ * Copyright (C) 2021-2022 Tony Dinh <mibodhi at gmail.com>
+ * Copyright (C) 2013-2021 Suriyan Ramasami <suriyan.r at gmail.com>
  *
  * Based on dockstar.c originally written by
  * Copyright (C) 2010  Eric C. Cooper <ecc at cmu.edu>
@@ -18,14 +15,14 @@
 #include <common.h>
 #include <bootstage.h>
 #include <init.h>
-#include <miiphy.h>
-#include <net.h>
+#include <netdev.h>
 #include <asm/global_data.h>
 #include <asm/mach-types.h>
 #include <asm/arch/soc.h>
 #include <asm/arch/mpp.h>
 #include <asm/arch/cpu.h>
 #include <asm/io.h>
+#include <linux/bitops.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -98,6 +95,11 @@ int board_early_init_f(void)
 	return 0;
 }
 
+int board_eth_init(struct bd_info *bis)
+{
+	return cpu_eth_init(bis);
+}
+
 int board_init(void)
 {
 	/*
@@ -111,73 +113,9 @@ int board_init(void)
 	return 0;
 }
 
-static int fdt_get_phy_addr(const char *path)
-{
-	const void *fdt = gd->fdt_blob;
-	const u32 *reg;
-	const u32 *val;
-	int node, phandle, addr;
-
-	/* Find the node by its full path */
-	node = fdt_path_offset(fdt, path);
-	if (node >= 0) {
-		/* Look up phy-handle */
-		val = fdt_getprop(fdt, node, "phy-handle", NULL);
-		if (val) {
-			phandle = fdt32_to_cpu(*val);
-			if (!phandle)
-				return -1;
-			/* Follow it to its node */
-			node = fdt_node_offset_by_phandle(fdt, phandle);
-			if (node) {
-				/* Look up reg */
-				reg = fdt_getprop(fdt, node, "reg", NULL);
-				if (reg) {
-					addr = fdt32_to_cpu(*reg);
-					return addr;
-				}
-			}
-		}
-	}
-	return -1;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-/* Configure and enable MV88E1116 PHY */
-void reset_phy(void)
-{
-	u16 reg;
-	int phyaddr;
-	char *name = "ethernet-controller at 72000";
-	char *eth0_path = "/ocp at f1000000/ethernet-controller at 72000/ethernet0-port at 0";
-
-	if (miiphy_set_current_dev(name))
-		return;
-
-	phyaddr = fdt_get_phy_addr(eth0_path);
-	if (phyaddr < 0)
-		return;
-
-	/*
-	 * Enable RGMII delay on Tx and Rx for CPU port
-	 * Ref: sec 4.7.2 of chip datasheet
-	 */
-	miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 2);
-	miiphy_read(name, phyaddr, MV88E1116_MAC_CTRL_REG, &reg);
-	reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
-	miiphy_write(name, phyaddr, MV88E1116_MAC_CTRL_REG, reg);
-	miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 0);
-
-	/* reset the phy */
-	miiphy_reset(name, phyaddr);
-
-	printf("88E1116 Initialized on %s\n", name);
-}
-#endif /* CONFIG_RESET_PHY_R */
-
 #if CONFIG_IS_ENABLED(BOOTSTAGE)
-#define GREEN_LED	(1 << 14)
-#define ORANGE_LED	(1 << 15)
+#define GREEN_LED	BIT(14)
+#define ORANGE_LED	BIT(15)
 #define BOTH_LEDS	(GREEN_LED | ORANGE_LED)
 #define NEITHER_LED	0
 
diff --git a/configs/goflexhome_defconfig b/configs/goflexhome_defconfig
index ec8b7398d0..e6eb00a938 100644
--- a/configs/goflexhome_defconfig
+++ b/configs/goflexhome_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_SYS_DCACHE_OFF=y
 CONFIG_ARCH_CPU_INIT=y
+CONFIG_SYS_THUMB_BUILD=y
 CONFIG_ARCH_KIRKWOOD=y
 CONFIG_SYS_KWD_CONFIG="board/Seagate/goflexhome/kwbimage.cfg"
 CONFIG_SYS_TEXT_BASE=0x600000
@@ -47,6 +48,7 @@ CONFIG_SATA_MV=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_PHY_MARVELL=y
 CONFIG_DM_ETH=y
 CONFIG_MVGBE=y
 CONFIG_MII=y
diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h
index 90e37d9853..c279579268 100644
--- a/include/configs/goflexhome.h
+++ b/include/configs/goflexhome.h
@@ -1,5 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
+ * Copyright (C) 2022 Tony Dinh <mibodhi at gmai.com>
  * Copyright (C) 2013 Suriyan Ramasami <suriyan.r at gmail.com>
  *
  * Based on dockstar.h originally written by
@@ -14,32 +15,18 @@
 #ifndef _CONFIG_GOFLEXHOME_H
 #define _CONFIG_GOFLEXHOME_H
 
+#include <linux/bitops.h>
+
 /*
  * Default GPIO configuration and LED status
  */
 #define GOFLEXHOME_OE_LOW               (~(0))
 #define GOFLEXHOME_OE_HIGH              (~(0))
-#define GOFLEXHOME_OE_VAL_LOW           (1 << 29)       /* USB_PWEN low */
-#define GOFLEXHOME_OE_VAL_HIGH          (1 << 17)       /* LED pin high */
-
-/* PHY related */
-#define MV88E1116_LED_FCTRL_REG         10
-#define MV88E1116_CPRSP_CR3_REG         21
-#define MV88E1116_MAC_CTRL_REG          21
-#define MV88E1116_PGADR_REG             22
-#define MV88E1116_RGMII_TXTM_CTRL       (1 << 4)
-#define MV88E1116_RGMII_RXTM_CTRL       (1 << 5)
+#define GOFLEXHOME_OE_VAL_LOW		BIT(29)		/* USB_PWEN low */
+#define GOFLEXHOME_OE_VAL_HIGH          BIT(17)		/* LED pin high */
 
 #include "mv-common.h"
 
-/*
- *  Environment variables configurations
- */
-/*
- * max 4k env size is enough, but in case of nand
- * it has to be rounded to sector size
- */
-
 /*
  * Default environment variables
  */
@@ -47,22 +34,21 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"console=console=ttyS0,115200\0" \
 	"mtdids=nand0=orion_nand\0" \
-	"mtdparts="CONFIG_MTDPARTS_DEFAULT \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT \
 	"kernel=/boot/uImage\0" \
 	"bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
 
 /*
  * Ethernet Driver configuration
  */
-#ifdef CONFIG_CMD_NET
 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
 #define CONFIG_PHY_BASE_ADR	0
-#endif /* CONFIG_CMD_NET */
+#ifdef CONFIG_RESET_PHY_R
+#undef CONFIG_RESET_PHY_R      /* remove legacy reset_phy() */
+#endif
 
 /* SATA driver configuration */
-#ifdef CONFIG_SATA
 #define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_LBA48
-#endif /* CONFIG_SATA */
 
 #endif /* _CONFIG_GOFLEXHOME_H */
-- 
2.30.2



More information about the U-Boot mailing list