[RFC PATCH v3 1/5] imx8m: drop env_get_location for imx8mn and imx8mp
Tommaso Merciai
tomm.merciai at gmail.com
Sat Jan 8 20:08:51 CET 2022
On Tue, Jan 04, 2022 at 11:04:10AM +0000, Teresa Remmet wrote:
> Hello Tommaso,
>
> Am Samstag, dem 25.12.2021 um 21:25 +0100 schrieb Tommaso Merciai:
> > This function defined for two architecture is not really generic
> > and can generate problem when people add a new board.
> >
> > Signed-off-by: Tommaso Merciai <tomm.merciai at gmail.com>
> > ---
> > arch/arm/mach-imx/imx8m/soc.c | 39 -------------------------------
> > ----
> > 1 file changed, 39 deletions(-)
> >
> > diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-
> > imx/imx8m/soc.c
> > index 863508776d..f0030a557a 100644
> > --- a/arch/arm/mach-imx/imx8m/soc.c
> > +++ b/arch/arm/mach-imx/imx8m/soc.c
> > @@ -1313,45 +1313,6 @@ void do_error(struct pt_regs *pt_regs,
> > unsigned int esr)
> > #endif
> >
> > #if defined(CONFIG_IMX8MN) || defined(CONFIG_IMX8MP)
> > -enum env_location env_get_location(enum env_operation op, int prio)
> > -{
> > - enum boot_device dev = get_boot_device();
> > - enum env_location env_loc = ENVL_UNKNOWN;
> > -
> > - if (prio)
> > - return env_loc;
> > -
> > - switch (dev) {
> > -#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
> > - case QSPI_BOOT:
> > - env_loc = ENVL_SPI_FLASH;
> > - break;
> > -#endif
> > -#ifdef CONFIG_ENV_IS_IN_NAND
> > - case NAND_BOOT:
> > - env_loc = ENVL_NAND;
> > - break;
> > -#endif
> > -#ifdef CONFIG_ENV_IS_IN_MMC
> > - case SD1_BOOT:
> > - case SD2_BOOT:
> > - case SD3_BOOT:
> > - case MMC1_BOOT:
> > - case MMC2_BOOT:
> > - case MMC3_BOOT:
> > - env_loc = ENVL_MMC;
> > - break;
> > -#endif
> > - default:
> > -#if defined(CONFIG_ENV_IS_NOWHERE)
> > - env_loc = ENVL_NOWHERE;
> > -#endif
> > - break;
> > - }
> > -
> > - return env_loc;
> > -}
> > -
> > #ifndef ENV_IS_EMBEDDED
> > long long env_get_offset(long long defautl_offset)
>
> would it not make sense to move also env_get_offset() to board level?
Hi Teresa,
I think is better to put this function at board level. In this way
others boards that use i.MX8MN/i.MX8MM SOC can customize env_get_location
function. For example: maybe one user want store U-Boot env on a device
other than the boot device.
Tommaso
>
> Regards,
> Teresa
>
>
> > {
> --
> PHYTEC Messtechnik GmbH | Robert-Koch-Str. 39 | 55129 Mainz, Germany
>
> Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber |
> Handelsregister Mainz HRB 4656 | Finanzamt Mainz | St.Nr. 266500608, DE
> 149059855
More information about the U-Boot
mailing list