[RFC PATCH 12/14] FWU: synquacer: Add FWU Multi bank update support for DeveloperBox
AKASHI Takahiro
takahiro.akashi at linaro.org
Fri Jan 21 03:22:01 CET 2022
On Fri, Jan 21, 2022 at 12:31:20AM +0900, Masami Hiramatsu wrote:
> The DeveloperBox platform can support the FWU Multi bank
> update. SCP firmware will switch the boot mode by DSW3-4
> and load the Multi bank update supported TF-A BL2 from
> 0x600000 offset on the SPI flash. Thus it can co-exist
> with the legacy boot mode (legacy U-Boot or EDK2).
>
> Signed-off-by: Masami Hiramatsu <masami.hiramatsu at linaro.org>
> ---
> board/socionext/developerbox/Kconfig | 19 ++++
> board/socionext/developerbox/Makefile | 1
> board/socionext/developerbox/fwu_plat.c | 158 +++++++++++++++++++++++++++++++
> include/configs/synquacer.h | 10 ++
> include/efi_loader.h | 3 +
> lib/efi_loader/efi_firmware.c | 14 +--
> 6 files changed, 198 insertions(+), 7 deletions(-)
> create mode 100644 board/socionext/developerbox/fwu_plat.c
>
> diff --git a/board/socionext/developerbox/Kconfig b/board/socionext/developerbox/Kconfig
> index c181d26a44..4e2c341aad 100644
> --- a/board/socionext/developerbox/Kconfig
> +++ b/board/socionext/developerbox/Kconfig
> @@ -32,4 +32,23 @@ config SYS_CONFIG_NAME
> default "synquacer"
>
> endif
> +
> +config FWU_MULTI_BANK_UPDATE
> + select FWU_MULTI_BANK_UPDATE_SF
> +
> +config FWU_MULTI_BANK_UPDATE_SF
> + select DM_SPI_FLASH
> +
> +config FWU_NUM_BANKS
> + default 6
> +
> +config FWU_NUM_IMAGES_PER_BANK
> + default 1
> +
> +config FWU_SF_PRIMARY_MDATA_OFFSET
> + default 0x500000
> +
> +config FWU_SF_SECONDARY_MDATA_OFFSET
> + default 0x520000
Are those configs DeveloperBox-specific?
-Takahiro Akashi
> +
> endif
> diff --git a/board/socionext/developerbox/Makefile b/board/socionext/developerbox/Makefile
> index 4a46de995a..15cce9c57e 100644
> --- a/board/socionext/developerbox/Makefile
> +++ b/board/socionext/developerbox/Makefile
> @@ -7,3 +7,4 @@
> #
>
> obj-y := developerbox.o
> +obj-$(CONFIG_FWU_MULTI_BANK_UPDATE_SF) += fwu_plat.o
> diff --git a/board/socionext/developerbox/fwu_plat.c b/board/socionext/developerbox/fwu_plat.c
> new file mode 100644
> index 0000000000..dbb814f1fd
> --- /dev/null
> +++ b/board/socionext/developerbox/fwu_plat.c
> @@ -0,0 +1,158 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2021, Linaro Limited
> + */
> +
> +#include <efi_loader.h>
> +#include <fwu.h>
> +#include <fwu_mdata.h>
> +#include <malloc.h>
> +#include <memalign.h>
> +#include <spi.h>
> +#include <spi_flash.h>
> +#include <flash.h>
> +
> +#include <linux/errno.h>
> +#include <linux/types.h>
> +#include <u-boot/crc.h>
> +
> +/* SPI Flash accessors */
> +static struct spi_flash *plat_spi_flash;
> +
> +static int __plat_sf_get_flash(void)
> +{
> + struct udevice *new;
> + int ret;
> +
> + //TODO: use CONFIG_FWU_SPI_*
> + ret = spi_flash_probe_bus_cs(CONFIG_SF_DEFAULT_BUS, CONFIG_SF_DEFAULT_CS,
> + CONFIG_SF_DEFAULT_SPEED, CONFIG_SF_DEFAULT_MODE,
> + &new);
> + if (ret)
> + return ret;
> +
> + plat_spi_flash = dev_get_uclass_priv(new);
> + return 0;
> +}
> +
> +static int plat_sf_get_flash(struct spi_flash **flash)
> +{
> + int ret = 0;
> +
> + if (!plat_spi_flash)
> + ret = __plat_sf_get_flash();
> +
> + *flash = plat_spi_flash;
> +
> + return ret;
> +}
> +
> +static int sf_load_data(u32 offs, u32 size, void **data)
> +{
> + struct spi_flash *flash;
> + int ret;
> +
> + ret = plat_sf_get_flash(&flash);
> + if (ret < 0)
> + return ret;
> +
> + *data = memalign(ARCH_DMA_MINALIGN, size);
> + if (!*data)
> + return -ENOMEM;
> +
> + ret = spi_flash_read(flash, offs, size, *data);
> + if (ret < 0) {
> + free(*data);
> + *data = NULL;
> + }
> +
> + return ret;
> +}
> +
> +/* Platform dependent GUIDs */
> +
> +/* The GUID for the SNI FIP image type GUID */
> +#define FWU_IMAGE_TYPE_DEVBOX_FIP_GUID \
> + EFI_GUID(0x7d6dc310, 0x52ca, 0x43b8, 0xb7, 0xb9, \
> + 0xf9, 0xd6, 0xc5, 0x01, 0xd1, 0x08)
> +
> +#define PLAT_METADATA_OFFSET 0x510000
> +#define PLAT_METADATA_SIZE (sizeof(struct devbox_metadata))
> +
> +struct __packed devbox_metadata {
> + u32 boot_index;
> + u32 boot_count;
> + u32 invert_dual;
> +} *devbox_plat_metadata;
> +
> +static const efi_guid_t devbox_fip_image_type_guid = FWU_IMAGE_TYPE_DEVBOX_FIP_GUID;
> +
> +int fwu_plat_get_image_alt_num(efi_guid_t image_type_id, u32 update_bank,
> + int *alt_no)
> +{
> + /* DeveloperBox FWU Multi bank only supports FIP image. */
> + if (guidcmp(&image_type_id, &devbox_fip_image_type_guid))
> + return -EOPNOTSUPP;
> +
> + /*
> + * DeveloperBox FWU expects Bank:Image = 1:1, and the dfu_alt_info
> + * only has the entries for banks. Thus the alt_no should be equal
> + * to the update_bank.
> + */
> + update_bank %= CONFIG_FWU_NUM_BANKS;
> + *alt_no = update_bank;
> +
> + return 0;
> +}
> +
> +/* SPI flash doesn't have GPT, and it's not blk device */
> +int fwu_plat_fill_partition_guids(efi_guid_t **part_guid_arr)
> +{
> + efi_status_t ret;
> +
> + free(*part_guid_arr);
> +
> + ret = efi_fill_part_guid_array(&devbox_fip_image_type_guid, part_guid_arr);
> + return (ret != EFI_SUCCESS) ? -ENOMEM : 0;
> +}
> +
> +/* TBD: add a usage counter for wear leveling */
> +int fwu_plat_get_update_index(u32 *update_idx)
> +{
> + int ret;
> + u32 active_idx;
> +
> + ret = fwu_get_active_index(&active_idx);
> +
> + if (ret < 0)
> + return -1;
> +
> + *update_idx = (active_idx + 1) % CONFIG_FWU_NUM_BANKS;
> +
> + return ret;
> +}
> +
> +static int devbox_load_plat_metadata(void)
> +{
> + if (devbox_plat_metadata)
> + return 0;
> +
> + return sf_load_data(PLAT_METADATA_OFFSET, PLAT_METADATA_SIZE,
> + (void **)&devbox_plat_metadata);
> +}
> +
> +void fwu_plat_get_bootidx(void *boot_idx)
> +{
> + u32 *bootidx = boot_idx;
> +
> + if (devbox_load_plat_metadata() < 0)
> + *bootidx = 0;
> + else
> + *bootidx = devbox_plat_metadata->boot_index;
> +}
> +
> +struct fwu_mdata_ops *get_plat_fwu_mdata_ops(void)
> +{
> + return fwu_sf_get_fwu_mdata_ops();
> +}
> +
> diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h
> index 6d67bd2af5..f859237550 100644
> --- a/include/configs/synquacer.h
> +++ b/include/configs/synquacer.h
> @@ -47,8 +47,18 @@
>
> /* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */
>
> +#ifdef CONFIG_FWU_MULTI_BANK_UPDATE
> +#define DEFAULT_DFU_ALT_INFO "dfu_alt_info=" \
> + "mtd nor1=bank0 raw 600000 400000;" \
> + "bank1 raw a00000 400000;" \
> + "bank2 raw e00000 400000;" \
> + "bank3 raw 1200000 400000;" \
> + "bank4 raw 1600000 400000;" \
> + "bank5 raw 1a00000 400000\0"
> +#else
> #define DEFAULT_DFU_ALT_INFO "dfu_alt_info=" \
> "mtd nor1=fip.bin raw 600000 400000\0"
> +#endif
>
> /* Distro boot settings */
> #ifndef CONFIG_SPL_BUILD
> diff --git a/include/efi_loader.h b/include/efi_loader.h
> index f20d361876..d6dc173feb 100644
> --- a/include/efi_loader.h
> +++ b/include/efi_loader.h
> @@ -953,6 +953,9 @@ void efi_memcpy_runtime(void *dest, const void *src, size_t n);
> u16 *efi_create_indexed_name(u16 *buffer, size_t buffer_size, const char *name,
> unsigned int index);
>
> +efi_status_t efi_fill_part_guid_array(const efi_guid_t *guid,
> + efi_guid_t **part_guid_arr);
> +
> extern const struct efi_firmware_management_protocol efi_fmp_fit;
> extern const struct efi_firmware_management_protocol efi_fmp_raw;
>
> diff --git a/lib/efi_loader/efi_firmware.c b/lib/efi_loader/efi_firmware.c
> index 107f0cb074..c100be35d3 100644
> --- a/lib/efi_loader/efi_firmware.c
> +++ b/lib/efi_loader/efi_firmware.c
> @@ -97,8 +97,8 @@ efi_status_t EFIAPI efi_firmware_set_package_info_unsupported(
> return EFI_EXIT(EFI_UNSUPPORTED);
> }
>
> -static efi_status_t fill_part_guid_array(const efi_guid_t *guid,
> - efi_guid_t **part_guid_arr)
> +efi_status_t efi_fill_part_guid_array(const efi_guid_t *guid,
> + efi_guid_t **part_guid_arr)
> {
> int i;
> int dfu_num = 0;
> @@ -309,8 +309,8 @@ efi_status_t EFIAPI efi_firmware_fit_get_image_info(
> !descriptor_size || !package_version || !package_version_name))
> return EFI_EXIT(EFI_INVALID_PARAMETER);
>
> - ret = fill_part_guid_array(&efi_firmware_image_type_uboot_fit,
> - &part_guid_arr);
> + ret = efi_fill_part_guid_array(&efi_firmware_image_type_uboot_fit,
> + &part_guid_arr);
> if (ret != EFI_SUCCESS)
> goto out;
>
> @@ -429,7 +429,7 @@ efi_status_t EFIAPI efi_firmware_raw_get_image_info(
> return EFI_EXIT(EFI_INVALID_PARAMETER);
>
> if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE)) {
> - ret = fill_part_guid_array(&null_guid, &part_guid_arr);
> + ret = efi_fill_part_guid_array(&null_guid, &part_guid_arr);
> if (ret != EFI_SUCCESS)
> goto out;
>
> @@ -444,8 +444,8 @@ efi_status_t EFIAPI efi_firmware_raw_get_image_info(
> goto out;
> }
> } else {
> - ret = fill_part_guid_array(&efi_firmware_image_type_uboot_raw,
> - &part_guid_arr);
> + ret = efi_fill_part_guid_array(&efi_firmware_image_type_uboot_raw,
> + &part_guid_arr);
> if (ret != EFI_SUCCESS)
> goto out;
> }
>
More information about the U-Boot
mailing list