[PATCH V2 2/2] imx: imx8mm_beacon: Enable USB

[Adam Ford]

On Sat, Jan 22, 2022 at 2:14 PM Fabio Estevam <festevam at gmail.com> wrote:
>
> Hi Adam,
>
> On Sat, Jan 22, 2022 at 3:27 PM Adam Ford <aford173 at gmail.com> wrote:
> >
> > With the updated device tree's having USB support, enable in
> > U-Boot.  This also requires the addition of the imx8m power
> > domain, since the USB is gated by the power domain controller.
> >
> > Signed-off-by: Adam Ford <aford173 at gmail.com>
> > ---
> > V2:  Rebase on master.  Change imx8mm-beacon-kit-u-boot
> >      to default to host mode, because gadget calls can
> >      override it.
>
> I assume this needs your patch below, correct?
> [PATCH V3] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn

No, I added the change to imx8mm-beacon-kit-u-boot to avoid the
necessity of the other patch.  They are also not mutually exclusive,
so if the  OTG auto detection gets added we can remove the
customization in imx8mm-beacon-kit-u-boot, but it also shouldn't hurt
anything either.

adam
>
> Reviewed-by: Fabio Estevam <festevam at gmail.com>