[PATCH] net: xilinx: fix the wrong dma base address issue

Michal Simek monstr at monstr.eu
Mon Jan 24 09:32:16 CET 2022



On 1/20/22 09:41, Andy Chiu wrote:
> From: Greentime Hu <greentime.hu at sifive.com>
> 
> If we just use fdtdec_get_addr_size_fixed to get "reg" it will use
> 64bit address cell to get the base address.
> 
> soc {
>     #address-cells = <1>;
>     #size-cells = <1>;
>     compatible ="SiFive,FU500-soc", "fu500-soc", "sifive-soc", "simple-bus";
>     ranges;
>     L28: axidma at 30010000 {
>             #dma-cells = <1>;
>             compatible = "xlnx,axi-dma-1.00.a";
>             axistream-connected = <&L27>;
>             axistream-control-connected = <&L27>;
>             clocks = <&L1>;
>             interrupt-parent = <&L6>;
>             interrupts = <32 33>;
>             reg = <0x30010000 0x4000>;
> 
> fdtdec_get_addr_size_fixed: reg: addr=3001000000004000
> 
> We should get the base address through its parent's address-cells and
> size-cells settings. So we should use fdtdec_get_addr_size_auto_parent()
> to get correct base address.
> 
> After applying this patch, we can get the correct base address of dma by
> replacing fdtdec_get_addr_size_fixed() with
> fdtdec_get_addr_size_auto_parent().
> 
> fdtdec_get_addr_size_auto_parent:
>       na=1, ns=1, fdtdec_get_addr_size_fixed: reg: addr=30010000
> 
> Signed-off-by: Greentime Hu <greentime.hu at sifive.com>
> Signed-off-by: Andy Chiu <andy.chiu at sifive.com>
> ---
> 
>   drivers/net/xilinx_axi_emac.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/xilinx_axi_emac.c b/drivers/net/xilinx_axi_emac.c
> index 2ec76d0f52..f21addb4d0 100644
> --- a/drivers/net/xilinx_axi_emac.c
> +++ b/drivers/net/xilinx_axi_emac.c
> @@ -832,8 +832,8 @@ static int axi_emac_of_to_plat(struct udevice *dev)
>   		printf("%s: axistream is not found\n", __func__);
>   		return -EINVAL;
>   	}
> -	plat->dmatx = (struct axidma_reg *)fdtdec_get_addr(gd->fdt_blob,
> -							  offset, "reg");
> +	plat->dmatx = (struct axidma_reg *)fdtdec_get_addr_size_auto_parent
> +		      (gd->fdt_blob, 0, offset, "reg", 0, NULL, false);
>   	if (!plat->dmatx) {
>   		printf("%s: axi_dma register space not found\n", __func__);
>   		return -EINVAL;

Applied.
M

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs




More information about the U-Boot mailing list