[PATCH v6 3/4] mtd: spi-nor-core: Add support for Macronix Octal flash

[Pratyush Yadav]

On 03/01/22 10:47AM, Tudor.Ambarus at microchip.com wrote:
> On 12/29/21 7:56 AM, JaimeLiao wrote:
> > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> > 
> > Adding Macronix Octal flash for Octal DTR support.
> > 
> > The octaflash series can be divided into the following types:
> > 
> > MX25 series : Serial NOR Flash.
> > MX66 series : Serial NOR Flash with stacked die.(Size larger than 1Gb)
> > LM/UM series : Up to 250MHz clock frequency with both DTR/STR operation.
> > LW/UW series : Support simultaneous Read-while-Write operation in multiple
> >                bank architecture. Read-while-write feature which means read
> >                data one bank while another bank is programing or erasing.
> > 
> > MX25LM : 3.0V Octal I/O
> >  -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7841/MX25LM51245G,%203V,%20512Mb,%20v1.1.pdf
> > 
> > MX25UM : 1.8V Octal I/O
> >  -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7525/MX25UM51245G%20Extreme%20Speed,%201.8V,%20512Mb,%20v1.0.pdf
> > 
> > MX66LM : 3.0V Octal I/O with stacked die
> >  -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7929/MX66LM1G45G,%203V,%201Gb,%20v1.1.pdf
> > 
> > MX66UM : 1.8V Octal I/O with stacked die
> >  -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7721/MX66UM1G45G,%201.8V,%201Gb,%20v1.1.pdf
> > 
> > MX25LW : 3.0V Octal I/O with Read-while-Write
> > MX25UW : 1.8V Octal I/O with Read-while-Write
> > MX66LW : 3.0V Octal I/O with Read-while-Write and stack die
> > MX66UW : 1.8V Octal I/O with Read-while-Write and stack die
> > 
> > About LW/UW series, please contact us freely if you have any
> > questions. For adding Octal NOR Flash IDs, we have validated
> > each Flash on plateform zynq-picozed.
> > 
> > Signed-off-by: JaimeLiao <jaimeliao.tw at gmail.com>
> > ---
> >  drivers/mtd/spi/spi-nor-ids.c | 22 +++++++++++++++++++++-
> >  1 file changed, 21 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
> > index cb3a08872d..5c13ea3a78 100644
> > --- a/drivers/mtd/spi/spi-nor-ids.c
> > +++ b/drivers/mtd/spi/spi-nor-ids.c
> > @@ -169,7 +169,27 @@ const struct flash_info spi_nor_ids[] = {
> >         { INFO("mx66l1g45g",  0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> >         { INFO("mx25l1633e", 0xc22415, 0, 64 * 1024,   32, SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES | SECT_4K) },
> >         { INFO("mx25r6435f", 0xc22817, 0, 64 * 1024,   128,  SECT_4K) },
> > -       { INFO("mx66uw2g345g", 0xc2943c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES) },
> > +       { INFO("mx66uw2g345gx0", 0xc2943c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
> > +       { INFO("mx66lm1g45g",    0xc2853b, 0, 32 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
> > +       { INFO("mx25lm51245g",   0xc2853a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
> > +       { INFO("mx25lw51245g",   0xc2863a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
> > +       { INFO("mx25lm25645g",   0xc28539, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
> > +       { INFO("mx66um2g45g",    0xc2803c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
> > +       { INFO("mx66uw2g345g",   0xc2843c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
> > +       { INFO("mx66um1g45g",    0xc2803b, 0, 32 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
> > +       { INFO("mx66uw1g45g",    0xc2813b, 0, 32 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
> > +       { INFO("mx25um51245g",   0xc2803a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
> > +       { INFO("mx25uw51245g",   0xc2813a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
> > +       { INFO("mx25uw51345g",   0xc2843a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
> > +       { INFO("mx25um25645g",   0xc28039, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
> > +       { INFO("mx25uw25645g",   0xc28139, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
> > +       { INFO("mx25um25345g",   0xc28339, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
> > +       { INFO("mx25uw25345g",   0xc28439, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
> > +       { INFO("mx25uw12845g",   0xc28138, 0, 4 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
> > +       { INFO("mx25uw12a45g",   0xc28938, 0, 4 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
> > +       { INFO("mx25uw12345g",   0xc28438, 0, 4 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
> > +       { INFO("mx25uw6445g",    0xc28137, 0, 2 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
> > +       { INFO("mx25uw6345g",    0xc28437, 0, 2 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
> 
> You need to at least specify which of these flashes support SFDP (describing the
> supported tables) and which not, otherwise this will become a maintenance burden.
> Best would be to dump all the SFDP tables for all the flashes.
> 
> My general feeling is that we should re-sync u-boot's SPI NOR subsystem with the
> one on linux sooner or later, or the code will become harder to maintain.
> Volunteers, thoughts? :)

I think that would be very nice indeed. But unfortunately I do not have 
any bandwidth to spare right now for this.

-- 
Regards,
Pratyush Yadav
Texas Instruments Inc.