mkimage_fit_atf.sh: not found

[Marcel Ziswiler]

On Wed, 2022-01-05 at 17:04 -0500, Tom Rini wrote:
> On Wed, Jan 05, 2022 at 10:51:23PM +0100, Marcel Ziswiler wrote:
> > Hi Tim et al.
> > 
> > On Wed, 2022-01-05 at 11:08 -0800, Tim Harvey wrote:
> > > On Wed, Jan 5, 2022 at 3:34 AM ZHIZHIKIN Andrey
> > > <andrey.zhizhikin at leica-geosystems.com> wrote:
> > > > 
> > > > Hello Tim,
> > > > 
> > > > > -----Original Message-----
> > > > > From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Tim Harvey
> > > > > Sent: Tuesday, January 4, 2022 11:48 PM
> > > > > To: u-boot <u-boot at lists.denx.de>; Stefano Babic <sbabic at denx.de>; Fabio Estevam
> > > > > <festevam at gmail.com>
> > > > > Cc: Schrempf Frieder <frieder.schrempf at kontron.de>; Adam Ford
> > > > > <aford173 at gmail.com>; Marcel Ziswiler <marcel at ziswiler.com>; Jagan Teki
> > > > > <jagan at amarulasolutions.com>
> > > > > Subject: mkimage_fit_atf.sh: not found
> > > > > 
> > > > > Stefano and Fabio,
> > > > > 
> > > > > I'm seeing the imx8mm_venice_defconfig target failing to build on
> > > > > master due to mkimage_fit_atf.sh not found:
> > > > > ./"arch/arm/mach-imx/mkimage_fit_atf.sh" \
> > > > > arch/arm/dts/imx8mm-venice-gw71xx-0x.dtb
> > > > > arch/arm/dts/imx8mm-venice-gw72xx-0x.dtb
> > > > > arch/arm/dts/imx8mm-venice-gw73xx-0x.dtb
> > > > > arch/arm/dts/imx8mm-venice-gw7901.dtb
> > > > > arch/arm/dts/imx8mm-venice-gw7902.dtb > u-boot.its
> > > > > /bin/sh: 1: ./arch/arm/mach-imx/mkimage_fit_atf.sh: not found
> > > > > 
> > > > 
> > > > This has been dropped in d9a6f0eed6 ("tree: imx: remove old fit generator script")
> > > 
> > > So why was that merged when it breaks several boards that are not
> > > switched to binman because of the CI issue?
> > 
> > I have to admit that I did not closely follow that discussion lately. But it seems to me that this should
> > be
> > solvable, not?
> > 
> > Anyway, at least in my local buildman use case just touching resp. binary blob file names helped me getting
> > thought this:
> > 
> > ⬢[zim at toolbox u-boot.git]$ touch lpddr4_pmu_train_1d_imem.bin
> > ⬢[zim at toolbox u-boot.git]$ touch lpddr4_pmu_train_1d_dmem.bin
> > ⬢[zim at toolbox u-boot.git]$ touch lpddr4_pmu_train_2d_imem.bin
> > ⬢[zim at toolbox u-boot.git]$ touch lpddr4_pmu_train_2d_dmem.bin
> > ⬢[zim at toolbox u-boot.git]$ touch bl31.bin
> > 
> > Couldn't that somehow also be done for CI?
> 
> There's a whole thread on making binman be able to fake things out in
> this case, so that it doesn't require too much special casing within CI
> itself.
> 
> > > > > As far as I can tell the other boards that are still using
> > > > > SPL_FIT_GENERATOR also fail due to this (ie imx8mm_beacon_defconfig,
> > > > > imx8mq_evk_defconfig, imx8mm-icore-mx8mm-edimm2.2_defconfig, etc).
> > > > 
> > > > imx8mq_evk is already converted and I've sent a patch for it, see [1].
> > > > 
> > > > > 
> > > > > What is the state of the binman conversion? I submitted a series to
> > > > > convert my boards to binman and it has just been sitting without any
> > > > > response for months now [1].
> > > > 
> > > > I believe that the reason for your series sitting in the queue is the same as
> > > > for imx8mq_evk: missing binary blobs (ATF and DDR) are failing CI builds.
> > > > 
> > > 
> > > Right, so imx8mq_evk (and others) are completely broken for the
> > > pending release correct?
> > > 
> > > Sounds like we need to revert d9a6f0eed6 ("tree: imx: remove old fit
> > > generator script")
> > 
> > I kind of agree. However, much smarter would be to finish that binman conversion which I also still have
> > one in
> > flight [1] plus the follow on patch series [2] (plus an unrelated i.MX 8M Plus board addition [3]) all
> > still
> > sitting there idle since October with acks resp. reviewed-bys in place!
> 
> Yes, I am hopeful many outstanding things in this area will get picked
> up after v2022.01 is released.  Might it make sense to revert what Tim
> suggested for now tho?

Sure, fair enough.

And what about them pending patch series?