[PATCH u-boot-marvell v2 06/20] tools: kwbimage: Add support for specifying CPU core
Pali Rohár
pali at kernel.org
Wed Jan 12 18:20:40 CET 2022
For other changes it is required to know if CPU core is Sheeva or not.
Therefore add a new command CPU for specifying CPU.
Signed-off-by: Pali Rohár <pali at kernel.org>
---
tools/kwbimage.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/tools/kwbimage.c b/tools/kwbimage.c
index 17d3c3cf223c..44843be2c13a 100644
--- a/tools/kwbimage.c
+++ b/tools/kwbimage.c
@@ -99,6 +99,7 @@ enum image_cfg_type {
IMAGE_CFG_NAND_BADBLK_LOCATION,
IMAGE_CFG_NAND_ECC_MODE,
IMAGE_CFG_NAND_PAGESZ,
+ IMAGE_CFG_CPU,
IMAGE_CFG_BINARY,
IMAGE_CFG_DATA,
IMAGE_CFG_DATA_DELAY,
@@ -129,6 +130,7 @@ static const char * const id_strs[] = {
[IMAGE_CFG_NAND_BADBLK_LOCATION] = "NAND_BADBLK_LOCATION",
[IMAGE_CFG_NAND_ECC_MODE] = "NAND_ECC_MODE",
[IMAGE_CFG_NAND_PAGESZ] = "NAND_PAGE_SIZE",
+ [IMAGE_CFG_CPU] = "CPU",
[IMAGE_CFG_BINARY] = "BINARY",
[IMAGE_CFG_DATA] = "DATA",
[IMAGE_CFG_DATA_DELAY] = "DATA_DELAY",
@@ -152,6 +154,7 @@ struct image_cfg_element {
enum image_cfg_type type;
union {
unsigned int version;
+ unsigned int cpu_sheeva;
unsigned int bootfrom;
struct {
const char *file;
@@ -280,6 +283,17 @@ static int image_get_bootfrom(void)
return e->bootfrom;
}
+static int image_is_cpu_sheeva(void)
+{
+ struct image_cfg_element *e;
+
+ e = image_find_option(IMAGE_CFG_CPU);
+ if (!e)
+ return 0;
+
+ return e->cpu_sheeva;
+}
+
/*
* Compute a 8-bit checksum of a memory area. This algorithm follows
* the requirements of the Marvell SoC BootROM specifications.
@@ -1489,6 +1503,18 @@ static int image_create_config_parse_oneline(char *line,
case IMAGE_CFG_VERSION:
el->version = atoi(value1);
break;
+ case IMAGE_CFG_CPU:
+ if (strcmp(value1, "FEROCEON") == 0)
+ el->cpu_sheeva = 0;
+ else if (strcmp(value1, "SHEEVA") == 0)
+ el->cpu_sheeva = 1;
+ else if (strcmp(value1, "A9") == 0)
+ el->cpu_sheeva = 0;
+ else {
+ fprintf(stderr, "Invalid CPU %s\n", value1);
+ return -1;
+ }
+ break;
case IMAGE_CFG_BOOT_FROM:
ret = image_boot_mode_id(value1);
--
2.20.1
More information about the U-Boot
mailing list