[PATCH u-boot-dm] fdt_support: Add fdt_for_each_node_by_compatible() helper macro
Stefan Roese
sr at denx.de
Mon Jan 10 08:59:59 CET 2022
Please find a few minor comments below...
On 1/7/22 11:13, Marek Behún wrote:
> From: Marek Behún <marek.behun at nic.cz>
>
> Add macro fdt_for_each_node_by_compatible() to allow iterating over
> fdt nodes by compatible string.
>
> Convert various usages of
> off = fdt_node_offset_by_compatible(fdt, start, compat);
> while (off > 0) {
> code();
> off = fdt_node_offset_by_compatible(fdt, off, compat);
> }
> and similar, to
> fdt_for_each_node_by_compatible(off, fdt, start, compat)
> code();
>
> Signed-off-by: Marek Behún <marek.behun at nic.cz>
> ---
> This currently applies on marvell/next, so only after that is merged
> it can be applied elsewhere.
> ---
> arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 9 ++-------
> arch/arm/cpu/armv8/fsl-layerscape/icid.c | 5 +----
> arch/arm/mach-tegra/gpu.c | 5 +----
> arch/mips/mach-octeon/octeon_fdt.c | 11 ++---------
> arch/powerpc/cpu/mpc85xx/liodn.c | 9 ++-------
> board/Marvell/octeon_ebb7304/board.c | 9 +++------
> board/congatec/cgtqmx8/spl.c | 7 ++-----
> board/freescale/lx2160a/lx2160a.c | 5 +----
> common/fdt_support.c | 22 ++++++++--------------
> drivers/misc/fsl_portals.c | 6 +-----
> drivers/net/fm/fdt.c | 3 +--
> drivers/pci/pcie_layerscape_fixup_common.c | 12 ++----------
> drivers/phy/marvell/comphy_a3700.c | 10 +++++-----
> drivers/video/meson/simplefb_common.c | 7 ++-----
> drivers/video/sunxi/simplefb_common.c | 5 ++---
> include/fdt_support.h | 6 ++++++
> 16 files changed, 41 insertions(+), 90 deletions(-)
Diffstat looks nice. :)
>
> diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
> index 4ec0dbf516..ddceab29d2 100644
> --- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
> +++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
> @@ -161,14 +161,9 @@ void fsl_fdt_disable_usb(void *blob)
> * controller is used, SYSCLK must meet the additional requirement
> * of 100 MHz.
> */
> - if (CONFIG_SYS_CLK_FREQ != 100000000) {
> - off = fdt_node_offset_by_compatible(blob, -1, "snps,dwc3");
> - while (off != -FDT_ERR_NOTFOUND) {
> + if (CONFIG_SYS_CLK_FREQ != 100000000)
> + fdt_for_each_node_by_compatible (off, blob, -1, "snps,dwc3")
Again here the question:
Why are adding the space before the "(" here? This does not seem the
common and preferred coding style AFAICT.
Other that this:
Reviewed-by: Stefan Roese <sr at denx.de>
Thanks,
Stefan
> fdt_status_disabled(blob, off);
> - off = fdt_node_offset_by_compatible(blob, off,
> - "snps,dwc3");
> - }
> - }
> }
>
> #ifdef CONFIG_HAS_FEATURE_GIC64K_ALIGN
> diff --git a/arch/arm/cpu/armv8/fsl-layerscape/icid.c b/arch/arm/cpu/armv8/fsl-layerscape/icid.c
> index 82c5a8b123..b74387e731 100644
> --- a/arch/arm/cpu/armv8/fsl-layerscape/icid.c
> +++ b/arch/arm/cpu/armv8/fsl-layerscape/icid.c
> @@ -116,8 +116,7 @@ void fdt_fixup_fman_port_icid_by_compat(void *blob, int smmu_ph,
> int noff, len, icid;
> const u32 *prop;
>
> - noff = fdt_node_offset_by_compatible(blob, -1, compat);
> - while (noff > 0) {
> + fdt_for_each_node_by_compatible (noff, blob, -1, compat) {
> prop = fdt_getprop(blob, noff, "cell-index", &len);
> if (!prop) {
> printf("WARNING missing cell-index for fman port\n");
> @@ -137,8 +136,6 @@ void fdt_fixup_fman_port_icid_by_compat(void *blob, int smmu_ph,
> }
>
> fdt_set_iommu_prop(blob, noff, smmu_ph, (u32 *)&icid, 1);
> -
> - noff = fdt_node_offset_by_compatible(blob, noff, compat);
> }
> }
>
> diff --git a/arch/arm/mach-tegra/gpu.c b/arch/arm/mach-tegra/gpu.c
> index 13ffade040..3ce51e8526 100644
> --- a/arch/arm/mach-tegra/gpu.c
> +++ b/arch/arm/mach-tegra/gpu.c
> @@ -46,11 +46,8 @@ int tegra_gpu_enable_node(void *blob, const char *compat)
> if (!_configured)
> return 0;
>
> - offset = fdt_node_offset_by_compatible(blob, -1, compat);
> - while (offset != -FDT_ERR_NOTFOUND) {
> + fdt_for_each_node_by_compatible (offset, blob, -1, compat)
> fdt_status_okay(blob, offset);
> - offset = fdt_node_offset_by_compatible(blob, offset, compat);
> - }
>
> return 0;
> }
> diff --git a/arch/mips/mach-octeon/octeon_fdt.c b/arch/mips/mach-octeon/octeon_fdt.c
> index 199f692516..1338b67611 100644
> --- a/arch/mips/mach-octeon/octeon_fdt.c
> +++ b/arch/mips/mach-octeon/octeon_fdt.c
> @@ -424,12 +424,8 @@ void __octeon_fixup_fdt_mac_addr(void)
> }
>
> /* Assign 78XX addresses in the order they appear in the device tree. */
> - node = fdt_node_offset_by_compatible(working_fdt, -1, "cavium,octeon-7890-bgx-port");
> - while (node != -FDT_ERR_NOTFOUND) {
> + fdt_for_each_node_by_compatible (node, working_fdt, -1, "cavium,octeon-7890-bgx-port")
> octeon_set_one_fdt_mac(node, &mac);
> - node = fdt_node_offset_by_compatible(working_fdt, node,
> - "cavium,octeon-7890-bgx-port");
> - }
> }
> #endif
>
> @@ -450,11 +446,8 @@ void __octeon_fixup_fdt_uart(void)
> /* Device trees already have good values for fast simulator
> * output, real boards need the correct value.
> */
> - node = fdt_node_offset_by_compatible(working_fdt, -1, "cavium,octeon-3860-uart");
> - while (node != -FDT_ERR_NOTFOUND) {
> + fdt_for_each_node_by_compatible (node, working_fdt, -1, "cavium,octeon-3860-uart")
> fdt_setprop_inplace_cell(working_fdt, node, "clock-frequency", clk);
> - node = fdt_node_offset_by_compatible(working_fdt, node, "cavium,octeon-3860-uart");
> - }
> }
>
> /**
> diff --git a/arch/powerpc/cpu/mpc85xx/liodn.c b/arch/powerpc/cpu/mpc85xx/liodn.c
> index e552378e78..d876fcff2c 100644
> --- a/arch/powerpc/cpu/mpc85xx/liodn.c
> +++ b/arch/powerpc/cpu/mpc85xx/liodn.c
> @@ -268,15 +268,10 @@ static void fdt_fixup_pci_liodn_offsets(void *fdt, const char *compat,
> * Count the number of pci nodes.
> * It's needed later when the interleaved liodn offsets are generated.
> */
> - off = fdt_node_offset_by_compatible(fdt, -1, compat);
> - while (off != -FDT_ERR_NOTFOUND) {
> + fdt_for_each_node_by_compatible (off, fdt, -1, compat)
> pci_cnt++;
> - off = fdt_node_offset_by_compatible(fdt, off, compat);
> - }
>
> - for (off = fdt_node_offset_by_compatible(fdt, -1, compat);
> - off != -FDT_ERR_NOTFOUND;
> - off = fdt_node_offset_by_compatible(fdt, off, compat)) {
> + fdt_for_each_node_by_compatible (off, fdt, -1, compat) {
> base_liodn = fdt_getprop(fdt, off, "fsl,liodn", &rc);
> if (!base_liodn) {
> char path[64];
> diff --git a/board/Marvell/octeon_ebb7304/board.c b/board/Marvell/octeon_ebb7304/board.c
> index c6c7c13483..daa9fc19d8 100644
> --- a/board/Marvell/octeon_ebb7304/board.c
> +++ b/board/Marvell/octeon_ebb7304/board.c
> @@ -103,9 +103,7 @@ static int get_lmac_fdt_node(const void *fdt, int search_node, int search_bgx, i
> int parent;
>
> /* Iterate through all bgx ports */
> - node = -1;
> - while ((node = fdt_node_offset_by_compatible((void *)fdt, node,
> - compat)) >= 0) {
> + fdt_for_each_node_by_compatible (node, (void *)fdt, -1, compat) {
> /* Get the node and bgx from the physical address */
> parent = fdt_parent_offset(fdt, node);
> reg = fdt_getprop(fdt, parent, "reg", &len);
> @@ -146,9 +144,8 @@ static int get_mix_fdt_node(const void *fdt, int search_node, int search_index)
> int node;
>
> /* Iterate through all the mix fdt nodes */
> - node = -1;
> - while ((node = fdt_node_offset_by_compatible((void *)fdt, node,
> - "cavium,octeon-7890-mix")) >= 0) {
> + fdt_for_each_node_by_compatible (node, (void *)fdt, node,
> + "cavium,octeon-7890-mix") {
> int parent;
> int len;
> const char *name;
> diff --git a/board/congatec/cgtqmx8/spl.c b/board/congatec/cgtqmx8/spl.c
> index 37b7221c52..19b681b65b 100644
> --- a/board/congatec/cgtqmx8/spl.c
> +++ b/board/congatec/cgtqmx8/spl.c
> @@ -29,13 +29,10 @@ void spl_board_init(void)
> continue;
> }
>
> - offset = fdt_node_offset_by_compatible(gd->fdt_blob, -1, "nxp,imx8-pd");
> - while (offset != -FDT_ERR_NOTFOUND) {
> + fdt_for_each_node_by_compatible (offset, gd->fdt_blob, -1,
> + "nxp,imx8-pd")
> lists_bind_fdt(gd->dm_root, offset_to_ofnode(offset),
> NULL, NULL, true);
> - offset = fdt_node_offset_by_compatible(gd->fdt_blob, offset,
> - "nxp,imx8-pd");
> - }
>
> uclass_find_first_device(UCLASS_POWER_DOMAIN, &dev);
>
> diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c
> index bda665624d..29d7722968 100644
> --- a/board/freescale/lx2160a/lx2160a.c
> +++ b/board/freescale/lx2160a/lx2160a.c
> @@ -123,8 +123,7 @@ int board_fix_fdt(void *fdt)
> if (IS_SVR_REV(get_svr(), 1, 0))
> return 0;
>
> - off = fdt_node_offset_by_compatible(fdt, -1, "fsl,lx2160a-pcie");
> - while (off != -FDT_ERR_NOTFOUND) {
> + fdt_for_each_node_by_compatible (off, fdt, -1, "fsl,lx2160a-pcie") {
> fdt_setprop(fdt, off, "compatible", "fsl,ls-pcie",
> strlen("fsl,ls-pcie") + 1);
>
> @@ -166,8 +165,6 @@ int board_fix_fdt(void *fdt)
> }
>
> fdt_setprop(fdt, off, "reg-names", reg_names, names_len);
> - off = fdt_node_offset_by_compatible(fdt, off,
> - "fsl,lx2160a-pcie");
> }
>
> return 0;
> diff --git a/common/fdt_support.c b/common/fdt_support.c
> index b2ba0825df..5d02927fb2 100644
> --- a/common/fdt_support.c
> +++ b/common/fdt_support.c
> @@ -371,12 +371,9 @@ void do_fixup_by_compat(void *fdt, const char *compat,
> debug(" %.2x", *(u8*)(val+i));
> debug("\n");
> #endif
> - off = fdt_node_offset_by_compatible(fdt, -1, compat);
> - while (off != -FDT_ERR_NOTFOUND) {
> + fdt_for_each_node_by_compatible (off, fdt, -1, compat)
> if (create || (fdt_get_property(fdt, off, prop, NULL) != NULL))
> fdt_setprop(fdt, off, prop, val, len);
> - off = fdt_node_offset_by_compatible(fdt, off, compat);
> - }
> }
>
> void do_fixup_by_compat_u32(void *fdt, const char *compat,
> @@ -996,10 +993,9 @@ void fdt_fixup_mtdparts(void *blob, const struct node_info *node_info,
>
> for (i = 0; i < node_info_size; i++) {
> idx = 0;
> - noff = -1;
>
> - while ((noff = fdt_node_offset_by_compatible(blob, noff,
> - node_info[i].compat)) >= 0) {
> + fdt_for_each_node_by_compatible (noff, blob, -1,
> + node_info[i].compat) {
> const char *prop;
>
> prop = fdt_getprop(blob, noff, "status", NULL);
> @@ -1473,14 +1469,12 @@ out:
> int fdt_node_offset_by_compat_reg(void *blob, const char *compat,
> phys_addr_t compat_off)
> {
> - int len, off = fdt_node_offset_by_compatible(blob, -1, compat);
> - while (off != -FDT_ERR_NOTFOUND) {
> + int len, off;
> +
> + fdt_for_each_node_by_compatible(off, blob, -1, compat) {
> const fdt32_t *reg = fdt_getprop(blob, off, "reg", &len);
> - if (reg) {
> - if (compat_off == fdt_translate_address(blob, off, reg))
> - return off;
> - }
> - off = fdt_node_offset_by_compatible(blob, off, compat);
> + if (reg && compat_off == fdt_translate_address(blob, off, reg))
> + return off;
> }
>
> return -FDT_ERR_NOTFOUND;
> diff --git a/drivers/misc/fsl_portals.c b/drivers/misc/fsl_portals.c
> index 02bc3f86ca..5300c030a7 100644
> --- a/drivers/misc/fsl_portals.c
> +++ b/drivers/misc/fsl_portals.c
> @@ -208,8 +208,7 @@ void fdt_fixup_qportals(void *blob)
> maj, min, ip_cfg) + 1;
> compat_len += sprintf(compat + compat_len, "fsl,qman-portal") + 1;
>
> - off = fdt_node_offset_by_compatible(blob, -1, "fsl,qman-portal");
> - while (off != -FDT_ERR_NOTFOUND) {
> + fdt_for_each_node_by_compatible (off, blob, -1, "fsl,qman-portal") {
> #if defined(CONFIG_PPC) || defined(CONFIG_ARCH_LS1043A) || \
> defined(CONFIG_ARCH_LS1046A)
> #ifdef CONFIG_FSL_CORENET
> @@ -295,9 +294,6 @@ err:
> fdt_strerror(err));
> return;
> }
> -
> - off = fdt_node_offset_by_compatible(blob, off,
> - "fsl,qman-portal");
> }
> }
>
> diff --git a/drivers/net/fm/fdt.c b/drivers/net/fm/fdt.c
> index 3855d7d58f..850ac49c8c 100644
> --- a/drivers/net/fm/fdt.c
> +++ b/drivers/net/fm/fdt.c
> @@ -115,8 +115,7 @@ void fdt_fixup_fman_firmware(void *blob)
> }
>
> /* Find all other Fman nodes and point them to the firmware node. */
> - while ((fmnode = fdt_node_offset_by_compatible(blob, fmnode,
> - "fsl,fman")) > 0) {
> + fdt_for_each_node_by_compatible (fmnode, blob, fmnode, "fsl,fman") {
> rc = fdt_setprop_cell(blob, fmnode, "fsl,firmware-phandle",
> phandle);
> if (rc < 0) {
> diff --git a/drivers/pci/pcie_layerscape_fixup_common.c b/drivers/pci/pcie_layerscape_fixup_common.c
> index faccf6c141..b9163833b8 100644
> --- a/drivers/pci/pcie_layerscape_fixup_common.c
> +++ b/drivers/pci/pcie_layerscape_fixup_common.c
> @@ -48,8 +48,7 @@ static int lx2_board_fix_fdt(void *fdt)
> const fdt32_t *prop;
> u32 ob_wins, ib_wins;
>
> - off = fdt_node_offset_by_compatible(fdt, -1, "fsl,lx2160a-pcie");
> - while (off != -FDT_ERR_NOTFOUND) {
> + fdt_for_each_node_by_compatible (off, fdt, -1, "fsl,lx2160a-pcie") {
> fdt_setprop(fdt, off, "compatible", "fsl,ls2088a-pcie",
> strlen("fsl,ls2088a-pcie") + 1);
>
> @@ -89,14 +88,10 @@ static int lx2_board_fix_fdt(void *fdt)
> fdt_setprop(fdt, off, "reg-names", reg_names, names_len);
> fdt_delprop(fdt, off, "apio-wins");
> fdt_delprop(fdt, off, "ppio-wins");
> - off = fdt_node_offset_by_compatible(fdt, off,
> - "fsl,lx2160a-pcie");
> }
>
> /* Fixup PCIe EP nodes */
> - off = -1;
> - off = fdt_node_offset_by_compatible(fdt, off, "fsl,lx2160a-pcie-ep");
> - while (off != -FDT_ERR_NOTFOUND) {
> + fdt_for_each_node_by_compatible (off, fdt, -1, "fsl,lx2160a-pcie-ep") {
> fdt_setprop_string(fdt, off, "compatible",
> "fsl,lx2160ar2-pcie-ep");
> prop = fdt_getprop(fdt, off, "apio-wins", NULL);
> @@ -113,9 +108,6 @@ static int lx2_board_fix_fdt(void *fdt)
> fdt_setprop_u32(fdt, off, "num-ib-windows", ib_wins);
> fdt_setprop_u32(fdt, off, "num-ob-windows", ob_wins);
> fdt_delprop(fdt, off, "apio-wins");
> -
> - off = fdt_node_offset_by_compatible(fdt, off,
> - "fsl,lx2160a-pcie-ep");
> }
>
> return 0;
> diff --git a/drivers/phy/marvell/comphy_a3700.c b/drivers/phy/marvell/comphy_a3700.c
> index 4104353555..5a3456584c 100644
> --- a/drivers/phy/marvell/comphy_a3700.c
> +++ b/drivers/phy/marvell/comphy_a3700.c
> @@ -985,12 +985,12 @@ void comphy_dedicated_phys_init(void)
>
> static int find_available_node_by_compatible(int offset, const char *compatible)
> {
> - do {
> - offset = fdt_node_offset_by_compatible(gd->fdt_blob, offset,
> - compatible);
> - } while (offset > 0 && !fdtdec_get_is_enabled(gd->fdt_blob, offset));
> + fdt_for_each_node_by_compatible (offset, gd->fdt_blob, offset,
> + compatible)
> + if (fdtdec_get_is_enabled(gd->fdt_blob, offset))
> + return offset;
>
> - return offset;
> + return -1;
> }
>
> static bool comphy_a3700_find_lane(const int nodes[3], int node,
> diff --git a/drivers/video/meson/simplefb_common.c b/drivers/video/meson/simplefb_common.c
> index 81782326d4..70ef86eced 100644
> --- a/drivers/video/meson/simplefb_common.c
> +++ b/drivers/video/meson/simplefb_common.c
> @@ -14,15 +14,12 @@ int meson_simplefb_fdt_match(void *blob, const char *pipeline)
> int offset, ret;
>
> /* Find a prefilled simpefb node, matching out pipeline config */
> - offset = fdt_node_offset_by_compatible(blob, -1,
> - "amlogic,simple-framebuffer");
> - while (offset >= 0) {
> + fdt_for_each_node_by_compatible (offset, blob, -1,
> + "amlogic,simple-framebuffer") {
> ret = fdt_stringlist_search(blob, offset, "amlogic,pipeline",
> pipeline);
> if (ret == 0)
> break;
> - offset = fdt_node_offset_by_compatible(blob, offset,
> - "amlogic,simple-framebuffer");
> }
>
> return offset;
> diff --git a/drivers/video/sunxi/simplefb_common.c b/drivers/video/sunxi/simplefb_common.c
> index df6501e4c3..852157c9c6 100644
> --- a/drivers/video/sunxi/simplefb_common.c
> +++ b/drivers/video/sunxi/simplefb_common.c
> @@ -16,13 +16,12 @@ int sunxi_simplefb_fdt_match(void *blob, const char *pipeline)
> /* Find a prefilled simpefb node, matching out pipeline config */
> offset = fdt_node_offset_by_compatible(blob, -1,
> "allwinner,simple-framebuffer");
> - while (offset >= 0) {
> + fdt_for_each_node_by_compatible (offset, blob, -1,
> + "allwinner,simple-framebuffer") {
> ret = fdt_stringlist_search(blob, offset, "allwinner,pipeline",
> pipeline);
> if (ret == 0)
> break;
> - offset = fdt_node_offset_by_compatible(blob, offset,
> - "allwinner,simple-framebuffer");
> }
>
> return offset;
> diff --git a/include/fdt_support.h b/include/fdt_support.h
> index 8ec461af6c..852040f66f 100644
> --- a/include/fdt_support.h
> +++ b/include/fdt_support.h
> @@ -289,6 +289,12 @@ int fdt_node_offset_by_compat_reg(void *blob, const char *compat,
> phys_addr_t compat_off);
> int fdt_node_offset_by_pathf(void *blob, const char *fmt, ...)
> __attribute__ ((format (printf, 2, 3)));
> +
> +#define fdt_for_each_node_by_compatible(node, fdt, start, compat) \
> + for (node = fdt_node_offset_by_compatible(fdt, start, compat); \
> + node >= 0; \
> + node = fdt_node_offset_by_compatible(fdt, node, compat))
> +
> int fdt_set_phandle(void *fdt, int nodeoffset, uint32_t phandle);
> unsigned int fdt_create_phandle(void *fdt, int nodeoffset);
> unsigned int fdt_create_phandle_by_compatible(void *fdt, const char *compat);
>
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
More information about the U-Boot
mailing list