[PATCH 1/3] sunxi: prcm: Add a few registers
Jernej Skrabec
jernej.skrabec at gmail.com
Sun Jan 30 15:27:13 CET 2022
H6 and H616 SPL code has a few writes to unknown PRCM registers. Now
that we know what they are, let's replace magic offsets with proper
register names.
Signed-off-by: Jernej Skrabec <jernej.skrabec at gmail.com>
---
arch/arm/include/asm/arch-sunxi/prcm_sun50i.h | 10 ++++++++++
arch/arm/mach-sunxi/clock_sun50i_h6.c | 4 +++-
arch/arm/mach-sunxi/dram_sun50i_h6.c | 8 +++++---
arch/arm/mach-sunxi/dram_sun50i_h616.c | 7 +++++--
4 files changed, 23 insertions(+), 6 deletions(-)
diff --git a/arch/arm/include/asm/arch-sunxi/prcm_sun50i.h b/arch/arm/include/asm/arch-sunxi/prcm_sun50i.h
index 5f636e83845a..fd63d3aad839 100644
--- a/arch/arm/include/asm/arch-sunxi/prcm_sun50i.h
+++ b/arch/arm/include/asm/arch-sunxi/prcm_sun50i.h
@@ -37,8 +37,18 @@ struct sunxi_prcm_reg {
u32 w1_gate_reset; /* 0x1ec */
u8 res10[0x1c]; /* 0x1f0 */
u32 rtc_gate_reset; /* 0x20c */
+ u8 res11[0x34]; /* 0x210 */
+ u32 pll_ldo_cfg; /* 0x244 */
+ u8 res12[0x8]; /* 0x248 */
+ u32 sys_pwroff_gating; /* 0x250 */
+ u8 res13[0xbc]; /* 0x254 */
+ u32 res_cal_ctrl; /* 0x310 */
+ u32 ohms200; /* 0x314 */
+ u32 ohms240; /* 0x318 */
+ u32 res_cal_status; /* 0x31c */
};
check_member(sunxi_prcm_reg, rtc_gate_reset, 0x20c);
+check_member(sunxi_prcm_reg, res_cal_status, 0x31c);
#define PRCM_TWI_GATE (1 << 0)
#define PRCM_TWI_RESET (1 << 16)
diff --git a/arch/arm/mach-sunxi/clock_sun50i_h6.c b/arch/arm/mach-sunxi/clock_sun50i_h6.c
index a947463e0a53..e5846e6381ff 100644
--- a/arch/arm/mach-sunxi/clock_sun50i_h6.c
+++ b/arch/arm/mach-sunxi/clock_sun50i_h6.c
@@ -9,10 +9,12 @@ void clock_init_safe(void)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ struct sunxi_prcm_reg *const prcm =
+ (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
/* this seems to enable PLLs on H616 */
if (IS_ENABLED(CONFIG_MACH_SUN50I_H616))
- setbits_le32(SUNXI_PRCM_BASE + 0x250, 0x10);
+ setbits_le32(&prcm->sys_pwroff_gating, 0x10);
clock_set_pll1(408000000);
diff --git a/arch/arm/mach-sunxi/dram_sun50i_h6.c b/arch/arm/mach-sunxi/dram_sun50i_h6.c
index d05375c90277..b332f3a3e4aa 100644
--- a/arch/arm/mach-sunxi/dram_sun50i_h6.c
+++ b/arch/arm/mach-sunxi/dram_sun50i_h6.c
@@ -12,6 +12,7 @@
#include <asm/arch/clock.h>
#include <asm/arch/dram.h>
#include <asm/arch/cpu.h>
+#include <asm/arch/prcm.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/kconfig.h>
@@ -665,6 +666,8 @@ unsigned long sunxi_dram_init(void)
{
struct sunxi_mctl_com_reg * const mctl_com =
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+ struct sunxi_prcm_reg *const prcm =
+ (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
struct dram_para para = {
.clk = CONFIG_DRAM_CLK,
#ifdef CONFIG_SUNXI_DRAM_H6_LPDDR3
@@ -680,9 +683,8 @@ unsigned long sunxi_dram_init(void)
unsigned long size;
- /* RES_CAL_CTRL_REG in BSP U-boot*/
- setbits_le32(0x7010310, BIT(8));
- clrbits_le32(0x7010318, 0x3f);
+ setbits_le32(&prcm->res_cal_ctrl, BIT(8));
+ clrbits_le32(&prcm->ohms240, 0x3f);
mctl_auto_detect_rank_width(¶);
mctl_auto_detect_dram_size(¶);
diff --git a/arch/arm/mach-sunxi/dram_sun50i_h616.c b/arch/arm/mach-sunxi/dram_sun50i_h616.c
index 83e8abc2f8d8..454c845a0010 100644
--- a/arch/arm/mach-sunxi/dram_sun50i_h616.c
+++ b/arch/arm/mach-sunxi/dram_sun50i_h616.c
@@ -19,6 +19,7 @@
#include <asm/arch/clock.h>
#include <asm/arch/dram.h>
#include <asm/arch/cpu.h>
+#include <asm/arch/prcm.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/kconfig.h>
@@ -1001,14 +1002,16 @@ static unsigned long mctl_calc_size(struct dram_para *para)
unsigned long sunxi_dram_init(void)
{
+ struct sunxi_prcm_reg *const prcm =
+ (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
struct dram_para para = {
.clk = CONFIG_DRAM_CLK,
.type = SUNXI_DRAM_TYPE_DDR3,
};
unsigned long size;
- setbits_le32(0x7010310, BIT(8));
- clrbits_le32(0x7010318, 0x3f);
+ setbits_le32(&prcm->res_cal_ctrl, BIT(8));
+ clrbits_le32(&prcm->ohms240, 0x3f);
mctl_auto_detect_rank_width(¶);
mctl_auto_detect_dram_size(¶);
--
2.35.1
More information about the U-Boot
mailing list