[PATCH V2 2/2] imx: imx8mm_beacon: Enable USB

[Adam Ford]

With the updated device tree's having USB support, enable in
U-Boot.  This also requires the addition of the imx8m power
domain, since the USB is gated by the power domain controller.

Signed-off-by: Adam Ford <aford173 at gmail.com>
---
V2:  Rebase on master.  Change imx8mm-beacon-kit-u-boot
     to default to host mode, because gadget calls can
     override it.

diff --git a/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi b/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi
index 73ddfdade6..e33e10ac12 100644
--- a/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi
@@ -77,6 +77,10 @@
 	u-boot,dm-spl;
 };
 
+&usbotg1 {
+	dr_mode="host";
+};
+
 &usdhc2 {
 	u-boot,dm-spl;
 };
diff --git a/configs/imx8mm_beacon_defconfig b/configs/imx8mm_beacon_defconfig
index ba9c9a3ee0..14b34e6516 100644
--- a/configs/imx8mm_beacon_defconfig
+++ b/configs/imx8mm_beacon_defconfig
@@ -45,6 +45,8 @@ CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PART=y
 CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
@@ -96,6 +98,8 @@ CONFIG_MII=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_IMX8M=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_IMX8M_POWER_DOMAIN=y
 CONFIG_DM_PMIC=y
 CONFIG_DM_PMIC_BD71837=y
 CONFIG_SPL_DM_PMIC_BD71837=y
@@ -118,4 +122,13 @@ CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_PSCI=y
 CONFIG_SYSRESET_WATCHDOG=y
 CONFIG_DM_THERMAL=y
+CONFIG_USB=y
+# CONFIG_SPL_DM_USB is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_IMX_WATCHDOG=y
-- 
2.32.0