[PATCH 1/3] doc: imx8mm_evk: Remove ATF_LOAD_ADDR export

[Fabio Estevam]

imx8mm-u-boot.dtsi passes the ATF load address via the
'entry' and 'load' properties.

Remove the step that performs the ATF_LOAD_ADDR export, which is
now unneeded.

Signed-off-by: Fabio Estevam <festevam at denx.de>
---
 doc/board/nxp/imx8mm_evk.rst | 1 -
 1 file changed, 1 deletion(-)

diff --git a/doc/board/nxp/imx8mm_evk.rst b/doc/board/nxp/imx8mm_evk.rst
index b377c4de276d..b9e67b954fc2 100644
--- a/doc/board/nxp/imx8mm_evk.rst
+++ b/doc/board/nxp/imx8mm_evk.rst
@@ -42,7 +42,6 @@ Build U-Boot
 
    $ export CROSS_COMPILE=aarch64-poky-linux-
    $ make imx8mm_evk_defconfig
-   $ export ATF_LOAD_ADDR=0x920000
    $ make
 
 Burn the flash.bin to MicroSD card offset 33KB:
-- 
2.25.1