[PATCH] stm32prog: add partition name in treat_partition_list error messages

Patrice CHOTARD patrice.chotard at foss.st.com
Mon Jan 24 13:17:44 CET 2022


Hi Patrick

On 1/18/22 10:33, Patrick Delaunay wrote:
> Add the partition name and remove the line number in error messages
> of treat_partition_list() to provide correct information to user of
> STM32CubeProgrammer.
> 
> The "line number" value was confusing because it is incorrect here;
> the index in  part_array[] is not aligned with the line number in
> the parsed Layout file, because the empty lines and the lines beginning
> by '#' are skipped during the first parsing in parse_flash_layout().
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
> 
>  arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
> index 3b6ca4e773..61cba157fd 100644
> --- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
> +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
> @@ -835,8 +835,8 @@ static int treat_partition_list(struct stm32prog_data *data)
>  		/* skip partition with IP="none" */
>  		if (part->target == STM32PROG_NONE) {
>  			if (IS_SELECT(part)) {
> -				stm32prog_err("Layout: selected none phase = 0x%x",
> -					      part->id);
> +				stm32prog_err("Layout: selected none phase = 0x%x for part %s",
> +					      part->id, part->name);
>  				return -EINVAL;
>  			}
>  			continue;
> @@ -844,14 +844,14 @@ static int treat_partition_list(struct stm32prog_data *data)
>  
>  		if (part->id == PHASE_FLASHLAYOUT ||
>  		    part->id > PHASE_LAST_USER) {
> -			stm32prog_err("Layout: invalid phase = 0x%x",
> -				      part->id);
> +			stm32prog_err("Layout: invalid phase = 0x%x for part %s",
> +				      part->id, part->name);
>  			return -EINVAL;
>  		}
>  		for (j = i + 1; j < data->part_nb; j++) {
>  			if (part->id == data->part_array[j].id) {
> -				stm32prog_err("Layout: duplicated phase 0x%x at line %d and %d",
> -					      part->id, i, j);
> +				stm32prog_err("Layout: duplicated phase 0x%x for part %s and %s",
> +					      part->id, part->name, data->part_array[j].name);
>  				return -EINVAL;
>  			}
>  		}
Applied to u-boot-stm/master

Thanks
Patrice


More information about the U-Boot mailing list