[PATCH 2/3] Convert CONFIG_SYS_IDE_MAXBUS et al to Kconfig
Simon Glass
sjg at chromium.org
Sat Jan 22 13:53:24 CET 2022
This converts the following to Kconfig:
CONFIG_SYS_IDE_MAXBUS
CONFIG_SYS_IDE_MAXDEVICE
CONFIG_SYS_ATA_BASE_ADDR
CONFIG_SYS_ATA_STRIDE
CONFIG_SYS_ATA_DATA_OFFSET
CONFIG_SYS_ATA_REG_OFFSET
CONFIG_SYS_ATA_ALT_OFFSET
CONFIG_SYS_ATA_IDE0_OFFSET
CONFIG_SYS_ATA_IDE1_OFFSET
CONFIG_ATAPI
CONFIG_IDE_RESET
Signed-off-by: Simon Glass <sjg at chromium.org>
---
README | 11 --
arch/arm/mach-kirkwood/include/mach/config.h | 7 --
configs/M5253DEMO_defconfig | 8 ++
configs/coreboot64_defconfig | 5 +
configs/coreboot_defconfig | 5 +
configs/dns325_defconfig | 4 +
configs/dreamplug_defconfig | 4 +
configs/ds109_defconfig | 4 +
configs/edminiv2_defconfig | 8 ++
configs/efi-x86_payload32_defconfig | 5 +
configs/efi-x86_payload64_defconfig | 5 +
configs/guruplug_defconfig | 4 +
configs/ib62x0_defconfig | 6 ++
configs/malta64_defconfig | 4 +
configs/malta64el_defconfig | 4 +
configs/malta_defconfig | 4 +
configs/maltael_defconfig | 4 +
configs/nas220_defconfig | 4 +
configs/openrd_base_defconfig | 6 ++
configs/openrd_client_defconfig | 6 ++
configs/openrd_ultimate_defconfig | 6 ++
configs/qemu-x86_64_defconfig | 5 +
configs/qemu-x86_defconfig | 5 +
configs/r2dplus_defconfig | 8 ++
configs/sandbox64_defconfig | 7 ++
configs/sandbox_defconfig | 7 ++
configs/sandbox_noinst_defconfig | 7 ++
configs/sandbox_spl_defconfig | 7 ++
drivers/block/Kconfig | 104 +++++++++++++++++++
include/ata.h | 3 -
include/configs/M5253DEMO.h | 13 ---
include/configs/coreboot.h | 9 --
include/configs/edminiv2.h | 8 --
include/configs/efi-x86_payload.h | 9 --
include/configs/ib62x0.h | 2 -
include/configs/lacie_kw.h | 2 -
include/configs/malta.h | 6 --
include/configs/openrd.h | 4 -
include/configs/qemu-x86.h | 9 --
include/configs/r2dplus.h | 8 --
include/configs/sandbox.h | 11 --
scripts/config_whitelist.txt | 11 --
42 files changed, 246 insertions(+), 113 deletions(-)
diff --git a/README b/README
index 4cad8f8356c..3870b0dbe4f 100644
--- a/README
+++ b/README
@@ -720,17 +720,6 @@ The following options need to be configured:
CONFIG_SCSI) you must configure support for at
least one non-MTD partition type as well.
-- IDE Reset method:
- CONFIG_IDE_RESET - is this is defined, IDE Reset will
- be performed by calling the function
- ide_set_reset(int reset)
- which has to be defined in a board specific file
-
-- ATAPI Support:
- CONFIG_ATAPI
-
- Set this to enable ATAPI support.
-
- LBA48 Support
CONFIG_LBA48
diff --git a/arch/arm/mach-kirkwood/include/mach/config.h b/arch/arm/mach-kirkwood/include/mach/config.h
index eb9502361ee..b9f836bbaf8 100644
--- a/arch/arm/mach-kirkwood/include/mach/config.h
+++ b/arch/arm/mach-kirkwood/include/mach/config.h
@@ -59,18 +59,11 @@
#ifdef CONFIG_IDE
#define __io
/* Data, registers and alternate blocks are at the same offset */
-#define CONFIG_SYS_ATA_DATA_OFFSET (0x0100)
-#define CONFIG_SYS_ATA_REG_OFFSET (0x0100)
-#define CONFIG_SYS_ATA_ALT_OFFSET (0x0100)
/* Each 8-bit ATA register is aligned to a 4-bytes address */
-#define CONFIG_SYS_ATA_STRIDE 4
/* Controller supports 48-bits LBA addressing */
#define CONFIG_LBA48
/* CONFIG_IDE requires some #defines for ATA registers */
-#define CONFIG_SYS_IDE_MAXBUS 2
-#define CONFIG_SYS_IDE_MAXDEVICE 2
/* ATA registers base is at SATA controller base */
-#define CONFIG_SYS_ATA_BASE_ADDR MV_SATA_BASE
#endif /* CONFIG_IDE */
/* Use common timer */
diff --git a/configs/M5253DEMO_defconfig b/configs/M5253DEMO_defconfig
index 67f9875829b..348f525bbb9 100644
--- a/configs/M5253DEMO_defconfig
+++ b/configs/M5253DEMO_defconfig
@@ -20,6 +20,14 @@ CONFIG_CMD_FAT=y
CONFIG_MAC_PARTITION=y
CONFIG_ENV_ADDR=0xFF804000
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_IDE_MAXBUS=1
+CONFIG_SYS_ATA_STRIDE=4
+CONFIG_SYS_ATA_DATA_OFFSET=0xA0
+CONFIG_SYS_ATA_REG_OFFSET=0xA0
+CONFIG_SYS_ATA_ALT_OFFSET=0xC0
+CONFIG_SYS_ATA_IDE0_OFFSET=0
+CONFIG_ATAPI=y
+CONFIG_IDE_RESET=y
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_FSL=y
CONFIG_SYS_FSL_I2C_OFFSET=0x280
diff --git a/configs/coreboot64_defconfig b/configs/coreboot64_defconfig
index 8146569a9d0..b3cb54702e5 100644
--- a/configs/coreboot64_defconfig
+++ b/configs/coreboot64_defconfig
@@ -46,6 +46,11 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_TFTP_TSIZE=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
+CONFIG_SYS_IDE_MAXDEVICE=4
+CONFIG_SYS_ATA_DATA_OFFSET=0
+CONFIG_SYS_ATA_REG_OFFSET=0
+CONFIG_SYS_ATA_ALT_OFFSET=0
+CONFIG_ATAPI=y
# CONFIG_PCI_PNP is not set
CONFIG_SOUND=y
CONFIG_SOUND_I8254=y
diff --git a/configs/coreboot_defconfig b/configs/coreboot_defconfig
index a12e4cd4126..c63902132d6 100644
--- a/configs/coreboot_defconfig
+++ b/configs/coreboot_defconfig
@@ -41,6 +41,11 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_TFTP_TSIZE=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
+CONFIG_SYS_IDE_MAXDEVICE=4
+CONFIG_SYS_ATA_DATA_OFFSET=0
+CONFIG_SYS_ATA_REG_OFFSET=0
+CONFIG_SYS_ATA_ALT_OFFSET=0
+CONFIG_ATAPI=y
# CONFIG_PCI_PNP is not set
CONFIG_SOUND=y
CONFIG_SOUND_I8254=y
diff --git a/configs/dns325_defconfig b/configs/dns325_defconfig
index 144fd30706b..1d6a24abedf 100644
--- a/configs/dns325_defconfig
+++ b/configs/dns325_defconfig
@@ -41,6 +41,10 @@ CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_NETCONSOLE=y
CONFIG_DM=y
+CONFIG_SYS_ATA_STRIDE=4
+CONFIG_SYS_ATA_DATA_OFFSET=0x100
+CONFIG_SYS_ATA_REG_OFFSET=0x100
+CONFIG_SYS_ATA_ALT_OFFSET=0x100
CONFIG_KIRKWOOD_GPIO=y
# CONFIG_MMC is not set
CONFIG_MTD=y
diff --git a/configs/dreamplug_defconfig b/configs/dreamplug_defconfig
index 557013dbacd..b7bc0e47dd4 100644
--- a/configs/dreamplug_defconfig
+++ b/configs/dreamplug_defconfig
@@ -41,6 +41,10 @@ CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
+CONFIG_SYS_ATA_STRIDE=4
+CONFIG_SYS_ATA_DATA_OFFSET=0x100
+CONFIG_SYS_ATA_REG_OFFSET=0x100
+CONFIG_SYS_ATA_ALT_OFFSET=0x100
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
diff --git a/configs/ds109_defconfig b/configs/ds109_defconfig
index 8e2aea9ad62..130a92780c3 100644
--- a/configs/ds109_defconfig
+++ b/configs/ds109_defconfig
@@ -39,6 +39,10 @@ CONFIG_ENV_SPI_MAX_HZ=50000000
CONFIG_ENV_ADDR=0x3D0000
CONFIG_NETCONSOLE=y
CONFIG_DM=y
+CONFIG_SYS_ATA_STRIDE=4
+CONFIG_SYS_ATA_DATA_OFFSET=0x100
+CONFIG_SYS_ATA_REG_OFFSET=0x100
+CONFIG_SYS_ATA_ALT_OFFSET=0x100
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MVTWSI=y
# CONFIG_MMC is not set
diff --git a/configs/edminiv2_defconfig b/configs/edminiv2_defconfig
index a8f61e4844a..1108d7cf229 100644
--- a/configs/edminiv2_defconfig
+++ b/configs/edminiv2_defconfig
@@ -33,6 +33,14 @@ CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_ENV_ADDR=0xFFF84000
CONFIG_NETCONSOLE=y
+CONFIG_SYS_IDE_MAXBUS=1
+CONFIG_SYS_IDE_MAXDEVICE=1
+CONFIG_SYS_ATA_BASE_ADDR=0xf1080000
+CONFIG_SYS_ATA_STRIDE=4
+CONFIG_SYS_ATA_DATA_OFFSET=0x100
+CONFIG_SYS_ATA_REG_OFFSET=0x100
+CONFIG_SYS_ATA_ALT_OFFSET=0x100
+CONFIG_SYS_ATA_IDE0_OFFSET=0x4000
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
diff --git a/configs/efi-x86_payload32_defconfig b/configs/efi-x86_payload32_defconfig
index d7be9579cce..fe6937e8a36 100644
--- a/configs/efi-x86_payload32_defconfig
+++ b/configs/efi-x86_payload32_defconfig
@@ -39,6 +39,11 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_TFTP_TSIZE=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
+CONFIG_SYS_IDE_MAXDEVICE=4
+CONFIG_SYS_ATA_DATA_OFFSET=0
+CONFIG_SYS_ATA_REG_OFFSET=0
+CONFIG_SYS_ATA_ALT_OFFSET=0
+CONFIG_ATAPI=y
# CONFIG_PCI_PNP is not set
# CONFIG_GZIP is not set
CONFIG_EFI=y
diff --git a/configs/efi-x86_payload64_defconfig b/configs/efi-x86_payload64_defconfig
index 36dd0647c23..98e280a1797 100644
--- a/configs/efi-x86_payload64_defconfig
+++ b/configs/efi-x86_payload64_defconfig
@@ -39,6 +39,11 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_TFTP_TSIZE=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
+CONFIG_SYS_IDE_MAXDEVICE=4
+CONFIG_SYS_ATA_DATA_OFFSET=0
+CONFIG_SYS_ATA_REG_OFFSET=0
+CONFIG_SYS_ATA_ALT_OFFSET=0
+CONFIG_ATAPI=y
# CONFIG_PCI_PNP is not set
# CONFIG_GZIP is not set
CONFIG_EFI=y
diff --git a/configs/guruplug_defconfig b/configs/guruplug_defconfig
index e7802afb0a0..e30467557c0 100644
--- a/configs/guruplug_defconfig
+++ b/configs/guruplug_defconfig
@@ -43,6 +43,10 @@ CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NETCONSOLE=y
CONFIG_DM=y
+CONFIG_SYS_ATA_STRIDE=4
+CONFIG_SYS_ATA_DATA_OFFSET=0x100
+CONFIG_SYS_ATA_REG_OFFSET=0x100
+CONFIG_SYS_ATA_ALT_OFFSET=0x100
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
diff --git a/configs/ib62x0_defconfig b/configs/ib62x0_defconfig
index 23a211c3913..2655124f806 100644
--- a/configs/ib62x0_defconfig
+++ b/configs/ib62x0_defconfig
@@ -42,6 +42,12 @@ CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NETCONSOLE=y
CONFIG_DM=y
+CONFIG_SYS_ATA_STRIDE=4
+CONFIG_SYS_ATA_DATA_OFFSET=0x100
+CONFIG_SYS_ATA_REG_OFFSET=0x100
+CONFIG_SYS_ATA_ALT_OFFSET=0x100
+CONFIG_SYS_ATA_IDE0_OFFSET=0x2000
+CONFIG_SYS_ATA_IDE1_OFFSET=0x4000
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
diff --git a/configs/malta64_defconfig b/configs/malta64_defconfig
index 9e6d8c0dc6b..1c1bc4e4cd4 100644
--- a/configs/malta64_defconfig
+++ b/configs/malta64_defconfig
@@ -25,6 +25,10 @@ CONFIG_CMD_DATE=y
# CONFIG_ISO_PARTITION is not set
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_ENV_ADDR=0xFFFFFFFFBE3E0000
+CONFIG_SYS_IDE_MAXBUS=1
+CONFIG_SYS_ATA_DATA_OFFSET=0
+CONFIG_SYS_ATA_REG_OFFSET=0
+CONFIG_SYS_ATA_IDE0_OFFSET=0x01f0
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
diff --git a/configs/malta64el_defconfig b/configs/malta64el_defconfig
index c44aa7e26d8..756138daafd 100644
--- a/configs/malta64el_defconfig
+++ b/configs/malta64el_defconfig
@@ -27,6 +27,10 @@ CONFIG_CMD_DATE=y
# CONFIG_ISO_PARTITION is not set
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_ENV_ADDR=0xFFFFFFFFBE3E0000
+CONFIG_SYS_IDE_MAXBUS=1
+CONFIG_SYS_ATA_DATA_OFFSET=0
+CONFIG_SYS_ATA_REG_OFFSET=0
+CONFIG_SYS_ATA_IDE0_OFFSET=0x01f0
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
diff --git a/configs/malta_defconfig b/configs/malta_defconfig
index 852e5c03be1..802cc370e9a 100644
--- a/configs/malta_defconfig
+++ b/configs/malta_defconfig
@@ -24,6 +24,10 @@ CONFIG_CMD_DATE=y
# CONFIG_ISO_PARTITION is not set
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_ENV_ADDR=0xBE3E0000
+CONFIG_SYS_IDE_MAXBUS=1
+CONFIG_SYS_ATA_DATA_OFFSET=0
+CONFIG_SYS_ATA_REG_OFFSET=0
+CONFIG_SYS_ATA_IDE0_OFFSET=0x01f0
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
diff --git a/configs/maltael_defconfig b/configs/maltael_defconfig
index b81ab6e33ae..f929fc82d26 100644
--- a/configs/maltael_defconfig
+++ b/configs/maltael_defconfig
@@ -26,6 +26,10 @@ CONFIG_CMD_DATE=y
# CONFIG_ISO_PARTITION is not set
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_ENV_ADDR=0xBE3E0000
+CONFIG_SYS_IDE_MAXBUS=1
+CONFIG_SYS_ATA_DATA_OFFSET=0
+CONFIG_SYS_ATA_REG_OFFSET=0
+CONFIG_SYS_ATA_IDE0_OFFSET=0x01f0
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
diff --git a/configs/nas220_defconfig b/configs/nas220_defconfig
index 7e4e19a9f78..f6a1dcbee06 100644
--- a/configs/nas220_defconfig
+++ b/configs/nas220_defconfig
@@ -42,6 +42,10 @@ CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NETCONSOLE=y
CONFIG_DM=y
+CONFIG_SYS_ATA_STRIDE=4
+CONFIG_SYS_ATA_DATA_OFFSET=0x100
+CONFIG_SYS_ATA_REG_OFFSET=0x100
+CONFIG_SYS_ATA_ALT_OFFSET=0x100
CONFIG_KIRKWOOD_GPIO=y
# CONFIG_MMC is not set
CONFIG_MTD=y
diff --git a/configs/openrd_base_defconfig b/configs/openrd_base_defconfig
index 2c5a29cfe35..a2fdafd10ee 100644
--- a/configs/openrd_base_defconfig
+++ b/configs/openrd_base_defconfig
@@ -43,6 +43,12 @@ CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NETCONSOLE=y
CONFIG_DM=y
+CONFIG_SYS_ATA_STRIDE=4
+CONFIG_SYS_ATA_DATA_OFFSET=0x100
+CONFIG_SYS_ATA_REG_OFFSET=0x100
+CONFIG_SYS_ATA_ALT_OFFSET=0x100
+CONFIG_SYS_ATA_IDE0_OFFSET=0x2000
+CONFIG_SYS_ATA_IDE1_OFFSET=0x4000
# CONFIG_MMC_HW_PARTITIONING is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
diff --git a/configs/openrd_client_defconfig b/configs/openrd_client_defconfig
index b21d41b1ed4..208deb4ce14 100644
--- a/configs/openrd_client_defconfig
+++ b/configs/openrd_client_defconfig
@@ -44,6 +44,12 @@ CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NETCONSOLE=y
CONFIG_DM=y
+CONFIG_SYS_ATA_STRIDE=4
+CONFIG_SYS_ATA_DATA_OFFSET=0x100
+CONFIG_SYS_ATA_REG_OFFSET=0x100
+CONFIG_SYS_ATA_ALT_OFFSET=0x100
+CONFIG_SYS_ATA_IDE0_OFFSET=0x2000
+CONFIG_SYS_ATA_IDE1_OFFSET=0x4000
# CONFIG_MMC_HW_PARTITIONING is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
diff --git a/configs/openrd_ultimate_defconfig b/configs/openrd_ultimate_defconfig
index ceeb62109aa..d7269c40860 100644
--- a/configs/openrd_ultimate_defconfig
+++ b/configs/openrd_ultimate_defconfig
@@ -44,6 +44,12 @@ CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NETCONSOLE=y
CONFIG_DM=y
+CONFIG_SYS_ATA_STRIDE=4
+CONFIG_SYS_ATA_DATA_OFFSET=0x100
+CONFIG_SYS_ATA_REG_OFFSET=0x100
+CONFIG_SYS_ATA_ALT_OFFSET=0x100
+CONFIG_SYS_ATA_IDE0_OFFSET=0x2000
+CONFIG_SYS_ATA_IDE1_OFFSET=0x4000
# CONFIG_MMC_HW_PARTITIONING is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
diff --git a/configs/qemu-x86_64_defconfig b/configs/qemu-x86_64_defconfig
index 2dfb48b3831..6b2f12a5057 100644
--- a/configs/qemu-x86_64_defconfig
+++ b/configs/qemu-x86_64_defconfig
@@ -55,6 +55,11 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_TFTP_TSIZE=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
+CONFIG_SYS_IDE_MAXDEVICE=4
+CONFIG_SYS_ATA_DATA_OFFSET=0
+CONFIG_SYS_ATA_REG_OFFSET=0
+CONFIG_SYS_ATA_ALT_OFFSET=0
+CONFIG_ATAPI=y
CONFIG_CPU=y
CONFIG_NVME=y
CONFIG_SPL_DM_RTC=y
diff --git a/configs/qemu-x86_defconfig b/configs/qemu-x86_defconfig
index 6be7ce0c6e6..f7743c63e36 100644
--- a/configs/qemu-x86_defconfig
+++ b/configs/qemu-x86_defconfig
@@ -38,6 +38,11 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_TFTP_TSIZE=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
+CONFIG_SYS_IDE_MAXDEVICE=4
+CONFIG_SYS_ATA_DATA_OFFSET=0
+CONFIG_SYS_ATA_REG_OFFSET=0
+CONFIG_SYS_ATA_ALT_OFFSET=0
+CONFIG_ATAPI=y
CONFIG_CPU=y
CONFIG_NVME=y
CONFIG_SPI=y
diff --git a/configs/r2dplus_defconfig b/configs/r2dplus_defconfig
index 9e2036a946b..8b5c8ff4e18 100644
--- a/configs/r2dplus_defconfig
+++ b/configs/r2dplus_defconfig
@@ -29,6 +29,14 @@ CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_ENV_ADDR=0xA0040000
CONFIG_DM=y
+CONFIG_SYS_IDE_MAXBUS=1
+CONFIG_SYS_IDE_MAXDEVICE=1
+CONFIG_SYS_ATA_BASE_ADDR=0xb4000000
+CONFIG_SYS_ATA_STRIDE=2
+CONFIG_SYS_ATA_DATA_OFFSET=0x1000
+CONFIG_SYS_ATA_REG_OFFSET=0x1000
+CONFIG_SYS_ATA_ALT_OFFSET=0x800
+CONFIG_IDE_RESET=y
CONFIG_CLK=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
diff --git a/configs/sandbox64_defconfig b/configs/sandbox64_defconfig
index c9afe4c8408..e1aac615070 100644
--- a/configs/sandbox64_defconfig
+++ b/configs/sandbox64_defconfig
@@ -106,6 +106,13 @@ CONFIG_ADC=y
CONFIG_ADC_SANDBOX=y
CONFIG_AXI=y
CONFIG_AXI_SANDBOX=y
+CONFIG_SYS_IDE_MAXBUS=1
+CONFIG_SYS_ATA_BASE_ADDR=0x100
+CONFIG_SYS_ATA_STRIDE=4
+CONFIG_SYS_ATA_DATA_OFFSET=0
+CONFIG_SYS_ATA_REG_OFFSET=1
+CONFIG_SYS_ATA_ALT_OFFSET=2
+CONFIG_SYS_ATA_IDE0_OFFSET=0
CONFIG_BUTTON=y
CONFIG_BUTTON_GPIO=y
CONFIG_CLK=y
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index 19cde873973..c540cd0aa5c 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -130,6 +130,13 @@ CONFIG_ADC=y
CONFIG_ADC_SANDBOX=y
CONFIG_AXI=y
CONFIG_AXI_SANDBOX=y
+CONFIG_SYS_IDE_MAXBUS=1
+CONFIG_SYS_ATA_BASE_ADDR=0x100
+CONFIG_SYS_ATA_STRIDE=4
+CONFIG_SYS_ATA_DATA_OFFSET=0
+CONFIG_SYS_ATA_REG_OFFSET=1
+CONFIG_SYS_ATA_ALT_OFFSET=2
+CONFIG_SYS_ATA_IDE0_OFFSET=0
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_DM_BOOTCOUNT=y
CONFIG_DM_BOOTCOUNT_RTC=y
diff --git a/configs/sandbox_noinst_defconfig b/configs/sandbox_noinst_defconfig
index 7d872ada15d..3d47ea620b7 100644
--- a/configs/sandbox_noinst_defconfig
+++ b/configs/sandbox_noinst_defconfig
@@ -110,6 +110,13 @@ CONFIG_ADC=y
CONFIG_ADC_SANDBOX=y
CONFIG_AXI=y
CONFIG_AXI_SANDBOX=y
+CONFIG_SYS_IDE_MAXBUS=1
+CONFIG_SYS_ATA_BASE_ADDR=0x100
+CONFIG_SYS_ATA_STRIDE=4
+CONFIG_SYS_ATA_DATA_OFFSET=0
+CONFIG_SYS_ATA_REG_OFFSET=1
+CONFIG_SYS_ATA_ALT_OFFSET=2
+CONFIG_SYS_ATA_IDE0_OFFSET=0
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_CPU=y
diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig
index 29a89171bc6..926c34c37e0 100644
--- a/configs/sandbox_spl_defconfig
+++ b/configs/sandbox_spl_defconfig
@@ -112,6 +112,13 @@ CONFIG_ADC=y
CONFIG_ADC_SANDBOX=y
CONFIG_AXI=y
CONFIG_AXI_SANDBOX=y
+CONFIG_SYS_IDE_MAXBUS=1
+CONFIG_SYS_ATA_BASE_ADDR=0x100
+CONFIG_SYS_ATA_STRIDE=4
+CONFIG_SYS_ATA_DATA_OFFSET=0
+CONFIG_SYS_ATA_REG_OFFSET=1
+CONFIG_SYS_ATA_ALT_OFFSET=2
+CONFIG_SYS_ATA_IDE0_OFFSET=0
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_CPU=y
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 8235430497d..c54b58110cf 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -102,3 +102,107 @@ config IDE
This allows access to raw blocks and filesystems on an IDE drive
from U-Boot. See also CMD_IDE which provides an 'ide' command for
performing various IDE operations.
+
+if IDE
+
+config SYS_IDE_MAXBUS
+ hex "Maximumm number of IDE buses"
+ default 2
+ help
+ This is the number of IDE buses provided by the board. Each one
+ can have one or two devices. One is designated the master and the
+ other one the slave. It is not required to have one or both on any
+ controller.
+
+config SYS_IDE_MAXDEVICE
+ hex "Maximum number of IDE devices"
+ default 2
+ help
+ This is the number of IDE devices which can be connected to the
+ board. Normally this is 2 * CONFIG_SYS_IDE_MAXBUS since up to two
+ devices can be connected to each bus. The number of devices actually
+ connected is determined by probing.
+
+config SYS_ATA_BASE_ADDR
+ hex "Base address of IDE controller"
+ default 0
+ help
+ This is the address of the IDE controller, from which other addresses
+ are calculated. Each bus is at a fixed offset from this address,
+ so it assumed that they are in the same area of the I/O space or
+ memory.
+
+config SYS_ATA_STRIDE
+ hex "IDE port stride"
+ default 0x1
+ help
+ This is the distance between each IDE register, in bytes. For an
+ 8-bit controller this is typically 1, meaning that the registers
+ appear at consecutive bytes. If the value 2 two, that might indicate
+ a 16-bit register space.
+
+config SYS_ATA_DATA_OFFSET
+ hex "Offset of the data register"
+ default 0x0
+ help
+ This is the offset of the controller's data register from the base
+ address of the controller. This is typically 0, but may be something
+ else if there are some other registers at the start of the
+ controller space.
+
+config SYS_ATA_REG_OFFSET
+ hex "Offset of the register space"
+ default 0x0
+ help
+ This is the offset of the controller's 'register' space from the base
+ address of the controller. The data register (which is typically at
+ offset 0) has its own CONFIG, to deal with controllers where it is
+ somewhere else. Register 1 will be at this offset + 1, register 2 at
+ CONFIG_SYS_ATA_REG_OFFSET + 2, etc.
+
+config SYS_ATA_ALT_OFFSET
+ hex "Offset of the alternative registers"
+ default 0x0
+ help
+ This is the offset of the controller's 'alternative' space from the
+ base address of the controller. This allows these registers to be
+ located separately from the data and register space.
+
+config SYS_ATA_IDE0_OFFSET
+ hex "Offset of bus 0"
+ default 0x1f0
+ help
+ This is the start offset of bus 0 from the start of the
+ controller registers. All the other registers are calculated from
+ this address. using the above options. For x86 hardware this is often
+ 0x1f0.
+
+config SYS_ATA_IDE1_OFFSET
+ hex "Offset of bus 1"
+ default 0x170
+ help
+ This is the start offset of bus 1 from the start of the
+ controller registers. All the other registers are calculated from
+ this address. using the above options. For x86 hardware this is often
+ 0x170.
+
+config ATAPI
+ bool "Enable ATAPI support"
+ help
+ This enabled Advanced Technology Attachment Packet Interface (ATAPI),
+ a protocol that allows a greater variety of devices to be connected
+ to the IDE port than with plain ATA. It allows SCSI commands to be
+ sent across the bus, e.g. to support optical drives.
+
+config IDE_RESET
+ bool "Support board-specific reset"
+ help
+ If this is defined, IDE Reset will be performed by calling the
+ function:
+
+ ide_set_reset(int reset)
+
+ where reset is 1 to assert reset and 0 to de-assert it. This function
+ must be defined in a board-specific file.
+
+endif # IDE
diff --git a/include/ata.h b/include/ata.h
index 32ad5f64271..a7bcee6a64c 100644
--- a/include/ata.h
+++ b/include/ata.h
@@ -19,9 +19,6 @@
* 8-bit (register) and 16-bit (data) accesses might use different
* address spaces. This is implemented by the following definitions.
*/
-#ifndef CONFIG_SYS_ATA_STRIDE
-#define CONFIG_SYS_ATA_STRIDE 1
-#endif
#define ATA_IO_DATA(x) (CONFIG_SYS_ATA_DATA_OFFSET+((x) * CONFIG_SYS_ATA_STRIDE))
#define ATA_IO_REG(x) (CONFIG_SYS_ATA_REG_OFFSET +((x) * CONFIG_SYS_ATA_STRIDE))
diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h
index 6ba5c525431..c27f0a5a2d7 100644
--- a/include/configs/M5253DEMO.h
+++ b/include/configs/M5253DEMO.h
@@ -23,21 +23,8 @@
#ifdef CONFIG_IDE
/* ATA */
-# define CONFIG_IDE_RESET 1
# define CONFIG_IDE_PREINIT 1
-# define CONFIG_ATAPI
# undef CONFIG_LBA48
-
-# define CONFIG_SYS_IDE_MAXBUS 1
-# define CONFIG_SYS_IDE_MAXDEVICE 2
-
-# define CONFIG_SYS_ATA_BASE_ADDR (CONFIG_SYS_MBAR2 + 0x800)
-# define CONFIG_SYS_ATA_IDE0_OFFSET 0
-
-# define CONFIG_SYS_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */
-# define CONFIG_SYS_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */
-# define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */
-# define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */
#endif
#define CONFIG_DRIVER_DM9000
diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h
index d6d679fd7dd..23c493b2582 100644
--- a/include/configs/coreboot.h
+++ b/include/configs/coreboot.h
@@ -22,14 +22,5 @@
"stderr=serial,vidconsole\0"
/* ATA/IDE support */
-#define CONFIG_SYS_IDE_MAXBUS 2
-#define CONFIG_SYS_IDE_MAXDEVICE 4
-#define CONFIG_SYS_ATA_BASE_ADDR 0
-#define CONFIG_SYS_ATA_DATA_OFFSET 0
-#define CONFIG_SYS_ATA_REG_OFFSET 0
-#define CONFIG_SYS_ATA_ALT_OFFSET 0
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0
-#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170
-#define CONFIG_ATAPI
#endif /* __CONFIG_H */
diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
index 90e387e6c5e..a599722ae3b 100644
--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@@ -110,20 +110,12 @@
#ifdef CONFIG_IDE
#define __io
/* Data, registers and alternate blocks are at the same offset */
-#define CONFIG_SYS_ATA_DATA_OFFSET (0x0100)
-#define CONFIG_SYS_ATA_REG_OFFSET (0x0100)
-#define CONFIG_SYS_ATA_ALT_OFFSET (0x0100)
/* Each 8-bit ATA register is aligned to a 4-bytes address */
-#define CONFIG_SYS_ATA_STRIDE 4
/* Controller supports 48-bits LBA addressing */
#define CONFIG_LBA48
/* A single bus, a single device */
-#define CONFIG_SYS_IDE_MAXBUS 1
-#define CONFIG_SYS_IDE_MAXDEVICE 1
/* ATA registers base is at SATA controller base */
-#define CONFIG_SYS_ATA_BASE_ADDR ORION5X_SATA_BASE
/* ATA bus 0 is orion5x port 1 on ED Mini V2 */
-#define CONFIG_SYS_ATA_IDE0_OFFSET ORION5X_SATA_PORT1_OFFSET
/* end of IDE defines */
#endif /* CMD_IDE */
diff --git a/include/configs/efi-x86_payload.h b/include/configs/efi-x86_payload.h
index 1cf5c037e85..59fad4c15db 100644
--- a/include/configs/efi-x86_payload.h
+++ b/include/configs/efi-x86_payload.h
@@ -19,14 +19,5 @@
"stderr=serial,vidconsole\0"
/* ATA/IDE support */
-#define CONFIG_SYS_IDE_MAXBUS 2
-#define CONFIG_SYS_IDE_MAXDEVICE 4
-#define CONFIG_SYS_ATA_BASE_ADDR 0
-#define CONFIG_SYS_ATA_DATA_OFFSET 0
-#define CONFIG_SYS_ATA_REG_OFFSET 0
-#define CONFIG_SYS_ATA_ALT_OFFSET 0
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0
-#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170
-#define CONFIG_ATAPI
#endif /* __CONFIG_H */
diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h
index 9783fd89ec0..2598deaac6e 100644
--- a/include/configs/ib62x0.h
+++ b/include/configs/ib62x0.h
@@ -40,8 +40,6 @@
*/
#ifdef CONFIG_IDE
#define __io
-#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
-#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
#endif /* CONFIG_IDE */
#endif /* _CONFIG_IB62x0_H */
diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h
index 046f1888cb1..7366a332f94 100644
--- a/include/configs/lacie_kw.h
+++ b/include/configs/lacie_kw.h
@@ -9,8 +9,6 @@
#include "mv-common.h"
/* Remove or override few declarations from mv-common.h */
-#undef CONFIG_SYS_IDE_MAXBUS
-#undef CONFIG_SYS_IDE_MAXDEVICE
/*
* Enable platform initialisation via misc_init_r() function
diff --git a/include/configs/malta.h b/include/configs/malta.h
index 61860ee6942..6d150fd557c 100644
--- a/include/configs/malta.h
+++ b/include/configs/malta.h
@@ -63,12 +63,6 @@
/*
* IDE/ATA
*/
-#define CONFIG_SYS_IDE_MAXBUS 1
-#define CONFIG_SYS_IDE_MAXDEVICE 2
-#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_ISA_IO_BASE_ADDRESS
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x01f0
-#define CONFIG_SYS_ATA_DATA_OFFSET 0
-#define CONFIG_SYS_ATA_REG_OFFSET 0
/*
* Commands
diff --git a/include/configs/openrd.h b/include/configs/openrd.h
index 43d089657b1..7dad002f3b8 100644
--- a/include/configs/openrd.h
+++ b/include/configs/openrd.h
@@ -59,9 +59,5 @@
/*
* SATA Driver configuration
*/
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
-#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
-#endif /*CONFIG_MVSATA_IDE*/
#endif /* _CONFIG_OPENRD_BASE_H */
diff --git a/include/configs/qemu-x86.h b/include/configs/qemu-x86.h
index 52c33600b3c..e9dbd54517f 100644
--- a/include/configs/qemu-x86.h
+++ b/include/configs/qemu-x86.h
@@ -33,15 +33,6 @@
* - Only legacy IDE controller is supported for QEMU '-M pc' target
* - AHCI controller is supported for QEMU '-M q35' target
*/
-#define CONFIG_SYS_IDE_MAXBUS 2
-#define CONFIG_SYS_IDE_MAXDEVICE 4
-#define CONFIG_SYS_ATA_BASE_ADDR 0
-#define CONFIG_SYS_ATA_DATA_OFFSET 0
-#define CONFIG_SYS_ATA_REG_OFFSET 0
-#define CONFIG_SYS_ATA_ALT_OFFSET 0
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0
-#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170
-#define CONFIG_ATAPI
#define CONFIG_SPL_BOARD_LOAD_IMAGE
diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h
index e3105fe53cb..49dcdbe4914 100644
--- a/include/configs/r2dplus.h
+++ b/include/configs/r2dplus.h
@@ -32,15 +32,7 @@
/*
* IDE support
*/
-#define CONFIG_IDE_RESET 1
#define CONFIG_SYS_PIO_MODE 1
-#define CONFIG_SYS_IDE_MAXBUS 1 /* IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1
-#define CONFIG_SYS_ATA_BASE_ADDR 0xb4000000
-#define CONFIG_SYS_ATA_STRIDE 2 /* 1bit shift */
-#define CONFIG_SYS_ATA_DATA_OFFSET 0x1000 /* data reg offset */
-#define CONFIG_SYS_ATA_REG_OFFSET 0x1000 /* reg offset */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x800 /* alternate register offset */
/*
* SuperH PCI Bridge Configration
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index 9e0e8c7056f..86b93bcbe70 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -29,17 +29,6 @@
#define CONFIG_SANDBOX_SDL
#endif
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SYS_IDE_MAXBUS 1
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0
-#define CONFIG_SYS_IDE_MAXDEVICE 2
-#define CONFIG_SYS_ATA_BASE_ADDR 0x100
-#define CONFIG_SYS_ATA_DATA_OFFSET 0
-#define CONFIG_SYS_ATA_REG_OFFSET 1
-#define CONFIG_SYS_ATA_ALT_OFFSET 2
-#define CONFIG_SYS_ATA_STRIDE 4
-#endif
-
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SYS_SCSI_MAX_DEVICE 2
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 8
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index e393fbee1b0..21c9c3095f6 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -21,7 +21,6 @@ CONFIG_AT91SAM9M10G45EK
CONFIG_AT91_GPIO_PULLUP
CONFIG_AT91_LED
CONFIG_AT91_WANTS_COMMON_PHY
-CONFIG_ATAPI
CONFIG_ATMEL_LCD
CONFIG_ATMEL_LCD_BGR555
CONFIG_ATMEL_LCD_RGB565
@@ -441,7 +440,6 @@ CONFIG_I2C_RTC_ADDR
CONFIG_ICACHE
CONFIG_ICS307_REFCLK_HZ
CONFIG_IDE_PREINIT
-CONFIG_IDE_RESET
CONFIG_IMX
CONFIG_IMX6_PWM_PER_CLK
CONFIG_IMX_HDMI
@@ -846,13 +844,6 @@ CONFIG_SYS_AT91_MAIN_CLOCK
CONFIG_SYS_AT91_PLLA
CONFIG_SYS_AT91_PLLB
CONFIG_SYS_AT91_SLOW_CLOCK
-CONFIG_SYS_ATA_ALT_OFFSET
-CONFIG_SYS_ATA_BASE_ADDR
-CONFIG_SYS_ATA_DATA_OFFSET
-CONFIG_SYS_ATA_IDE0_OFFSET
-CONFIG_SYS_ATA_IDE1_OFFSET
-CONFIG_SYS_ATA_REG_OFFSET
-CONFIG_SYS_ATA_STRIDE
CONFIG_SYS_AUTOLOAD
CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
CONFIG_SYS_AUXCORE_BOOTDATA
@@ -1418,8 +1409,6 @@ CONFIG_SYS_I2C_RTC_ADDR
CONFIG_SYS_I2C_TCA642X_ADDR
CONFIG_SYS_I2C_TCA642X_BUS_NUM
CONFIG_SYS_ICACHE_INV
-CONFIG_SYS_IDE_MAXBUS
-CONFIG_SYS_IDE_MAXDEVICE
CONFIG_SYS_IFC_ADDR
CONFIG_SYS_IFC_CCR
CONFIG_SYS_INIT_DBCR
--
2.35.0.rc0.227.g00780c9af4-goog
More information about the U-Boot
mailing list