[PATCH v2 09/12] bloblist: Refactor Kconfig to support alloc or fixed
Simon Glass
sjg at chromium.org
Thu Jan 13 03:26:22 CET 2022
At present we do support allocating the bloblist but the Kconfig is a bit
strange, since we still have to specify an address in that case. Partly
this is because it is a pain to have CONFIG options that disappears when
its dependency is enabled. It means that we must have #ifdefs in the code,
either in the C code or header file.
Make use of IF_ENABLED_INT() and its friend to solve that problem, so we
can separate out the location of bloblist into a choice. Put the address
and size into variables so we can log the result.
Add the options for SPL as well, so we can use CONFIG_IS_ENABLED().
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2:
- Create an accessor for CONFIG_BLOBLIST_ADDR instead of the Kconfig macro
common/Kconfig | 91 +++++++++++++++++++++++++++++++++++++++++-----
common/bloblist.c | 39 ++++++++++++--------
include/bloblist.h | 10 +++++
3 files changed, 116 insertions(+), 24 deletions(-)
diff --git a/common/Kconfig b/common/Kconfig
index ca136b1ac7f..82cd864baf9 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -738,15 +738,17 @@ config TPL_BLOBLIST
if BLOBLIST
-config BLOBLIST_SIZE
- hex "Size of bloblist"
- depends on BLOBLIST
- default 0x400
+choice
+ prompt "Bloblist location"
help
- Sets the size of the bloblist in bytes. This must include all
- overhead (alignment, bloblist header, record header). The bloblist
- is set up in the first part of U-Boot to run (TPL, SPL or U-Boot
- proper), and this sane bloblist is used for subsequent phases.
+ Select the location of the bloblist, via various means.
+
+config BLOBLIST_FIXED
+ bool "Place bloblist at a fixed address in memory"
+ help
+ Select this to used a fixed memory address for the bloblist. If the
+ bloblist exists at this address from a previous phase, it used as is.
+ If not it is created at this address in U-Boot.
config BLOBLIST_ALLOC
bool "Allocate bloblist"
@@ -755,18 +757,31 @@ config BLOBLIST_ALLOC
specify a fixed address on systems where this is unknown or can
change at runtime.
+endchoice
+
config BLOBLIST_ADDR
hex "Address of bloblist"
default 0xc000 if SANDBOX
+ depends on BLOBLIST_FIXED
help
Sets the address of the bloblist, set up by the first part of U-Boot
which runs. Subsequent U-Boot phases typically use the same address.
This is not used if BLOBLIST_ALLOC is selected.
+config BLOBLIST_SIZE
+ hex "Size of bloblist"
+ default 0x400
+ help
+ Sets the size of the bloblist in bytes. This must include all
+ overhead (alignment, bloblist header, record header). The bloblist
+ is set up in the first part of U-Boot to run (TPL, SPL or U-Boot
+ proper), and this sane bloblist is used for subsequent phases.
+
config BLOBLIST_SIZE_RELOC
hex "Size of bloblist after relocation"
- default BLOBLIST_SIZE
+ default BLOBLIST_SIZE if BLOBLIST_FIXED || BLOBLIST_ALLOC
+ default 0 if BLOBLIST_PASSAGE
help
Sets the size of the bloblist in bytes after relocation. Since U-Boot
has a lot more memory available then, it is possible to use a larger
@@ -775,6 +790,64 @@ config BLOBLIST_SIZE_RELOC
endif # BLOBLIST
+if SPL_BLOBLIST
+
+choice
+ prompt "Bloblist location in SPL"
+ help
+ Select the location of the bloblist, via various means. Typically
+ you should use the same value for SPL as for U-Boot, since they need
+ to look in the same place. But if BLOBLIST_ALLOC is used, then a
+ fresh bloblist will be created each time, since there is no shared
+ address (between phases) for the bloblist.
+
+config SPL_BLOBLIST_FIXED
+ bool "Place bloblist at a fixed address in memory"
+ help
+ Select this to used a fixed memory address for the bloblist. If the
+ bloblist exists at this address from a previous phase, it used as is.
+ If not it is created at this address in SPL.
+
+config SPL_BLOBLIST_ALLOC
+ bool "Allocate bloblist"
+ help
+ Allocate the bloblist using malloc(). This avoids the need to
+ specify a fixed address on systems where this is unknown or can
+ change at runtime.
+
+endchoice
+
+endif # SPL_BLOBLIST
+
+if TPL_BLOBLIST
+
+choice
+ prompt "Bloblist location in TPL"
+ help
+ Select the location of the bloblist, via various means. Typically
+ you should use the same value for SPL as for U-Boot, since they need
+ to look in the same place. But if BLOBLIST_ALLOC is used, then a
+ fresh bloblist will be created each time, since there is no shared
+ address (between phases) for the bloblist.
+
+config TPL_BLOBLIST_FIXED
+ bool "Place bloblist at a fixed address in memory"
+ help
+ Select this to used a fixed memory address for the bloblist. If the
+ bloblist exists at this address from a previous phase, it used as is.
+ If not it is created at this address in TPL.
+
+config TPL_BLOBLIST_ALLOC
+ bool "Allocate bloblist"
+ help
+ Allocate the bloblist using malloc(). This avoids the need to
+ specify a fixed address on systems where this is unknown or can
+ change at runtime.
+
+endchoice
+
+endif # TPL_BLOBLIST
+
endmenu
source "common/spl/Kconfig"
diff --git a/common/bloblist.c b/common/bloblist.c
index b5fea12b697..0049bb9a395 100644
--- a/common/bloblist.c
+++ b/common/bloblist.c
@@ -4,6 +4,7 @@
* Written by Simon Glass <sjg at chromium.org>
*/
+#define LOG_DEBUG
#define LOG_CATEGORY LOGC_BLOBLIST
#include <common.h>
@@ -360,6 +361,8 @@ int bloblist_finish(void)
struct bloblist_hdr *hdr = gd->bloblist;
hdr->chksum = bloblist_calc_chksum(hdr);
+ log_debug("Finished bloblist size %lx at %lx\n", (ulong)hdr->size,
+ (ulong)map_to_sysmem(hdr));
return 0;
}
@@ -415,8 +418,9 @@ void bloblist_reloc(void *to, uint to_size, void *from, uint from_size)
int bloblist_init(void)
{
- bool expected;
int ret = -ENOENT;
+ ulong addr, size;
+ bool expected;
/**
* Wed expect to find an existing bloblist in the first phase of U-Boot
@@ -425,27 +429,32 @@ int bloblist_init(void)
expected = !u_boot_first_phase();
if (spl_prev_phase() == PHASE_TPL && !IS_ENABLED(CONFIG_TPL_BLOBLIST))
expected = false;
- if (expected)
- ret = bloblist_check(CONFIG_BLOBLIST_ADDR,
- CONFIG_BLOBLIST_SIZE);
+ addr = bloblist_addr();
+ size = CONFIG_BLOBLIST_SIZE;
+ if (expected) {
+ ret = bloblist_check(addr, size);
+ if (ret) {
+ log_warning("Expected bloblist at %lx not found (err=%d)\n",
+ addr, ret);
+ } else {
+ /* Get the real size, if it is not what we expected */
+ size = gd->bloblist->size;
+ }
+ }
if (ret) {
- ulong addr;
-
- log(LOGC_BLOBLIST, expected ? LOGL_WARNING : LOGL_DEBUG,
- "Existing bloblist not found: creating new bloblist\n");
- if (IS_ENABLED(CONFIG_BLOBLIST_ALLOC)) {
- void *ptr = memalign(BLOBLIST_ALIGN,
- CONFIG_BLOBLIST_SIZE);
+ if (CONFIG_IS_ENABLED(BLOBLIST_ALLOC)) {
+ void *ptr = memalign(BLOBLIST_ALIGN, size);
if (!ptr)
return log_msg_ret("alloc", -ENOMEM);
addr = map_to_sysmem(ptr);
- } else {
- addr = CONFIG_BLOBLIST_ADDR;
}
- ret = bloblist_new(addr, CONFIG_BLOBLIST_SIZE, 0);
+ log_debug("Creating new bloblist size %lx at %lx\n", size,
+ addr);
+ ret = bloblist_new(addr, size, 0);
} else {
- log_debug("Found existing bloblist\n");
+ log_debug("Found existing bloblist size %lx at %lx\n", size,
+ addr);
}
return ret;
diff --git a/include/bloblist.h b/include/bloblist.h
index 5de4545160e..13f2b3f1009 100644
--- a/include/bloblist.h
+++ b/include/bloblist.h
@@ -147,6 +147,16 @@ struct bloblist_rec {
u32 spare;
};
+/* access CONFIG_BLOBLIST_ADDR, dealing with it possibly not being defined */
+static inline ulong bloblist_addr(void)
+{
+#ifdef CONFIG_BLOBLIST_FIXED
+ return CONFIG_BLOBLIST_ADDR;
+#else
+ return 0;
+#endif
+}
+
/**
* bloblist_check_magic() - return a bloblist if the magic matches
*
--
2.34.1.575.g55b058a8bb-goog
More information about the U-Boot
mailing list