mkimage_fit_atf.sh: not found

[Tom Rini]

On Thu, Jan 06, 2022 at 09:10:00AM -0800, Tim Harvey wrote:
> On Thu, Jan 6, 2022 at 2:07 AM ZHIZHIKIN Andrey
> <andrey.zhizhikin at leica-geosystems.com> wrote:
> >
> > Hello Tim,
> >
> > > -----Original Message-----
> > > From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Tim Harvey
> > > Sent: Wednesday, January 5, 2022 8:08 PM
> > > To: ZHIZHIKIN Andrey <andrey.zhizhikin at leica-geosystems.com>
> > > Cc: u-boot <u-boot at lists.denx.de>; Stefano Babic <sbabic at denx.de>; Fabio Estevam
> > > <festevam at gmail.com>; Schrempf Frieder <frieder.schrempf at kontron.de>; Adam Ford
> > > <aford173 at gmail.com>; Marcel Ziswiler <marcel at ziswiler.com>; Jagan Teki
> > > <jagan at amarulasolutions.com>
> > > Subject: Re: mkimage_fit_atf.sh: not found
> > >
> > > On Wed, Jan 5, 2022 at 3:34 AM ZHIZHIKIN Andrey
> > > <andrey.zhizhikin at leica-geosystems.com> wrote:
> > > >
> > > > Hello Tim,
> > > >
> > > > > -----Original Message-----
> > > > > From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Tim Harvey
> > > > > Sent: Tuesday, January 4, 2022 11:48 PM
> > > > > To: u-boot <u-boot at lists.denx.de>; Stefano Babic <sbabic at denx.de>; Fabio
> > > Estevam
> > > > > <festevam at gmail.com>
> > > > > Cc: Schrempf Frieder <frieder.schrempf at kontron.de>; Adam Ford
> > > > > <aford173 at gmail.com>; Marcel Ziswiler <marcel at ziswiler.com>; Jagan Teki
> > > > > <jagan at amarulasolutions.com>
> > > > > Subject: mkimage_fit_atf.sh: not found
> > > > >
> > > > > Stefano and Fabio,
> > > > >
> > > > > I'm seeing the imx8mm_venice_defconfig target failing to build on
> > > > > master due to mkimage_fit_atf.sh not found:
> > > > > ./"arch/arm/mach-imx/mkimage_fit_atf.sh" \
> > > > > arch/arm/dts/imx8mm-venice-gw71xx-0x.dtb
> > > > > arch/arm/dts/imx8mm-venice-gw72xx-0x.dtb
> > > > > arch/arm/dts/imx8mm-venice-gw73xx-0x.dtb
> > > > > arch/arm/dts/imx8mm-venice-gw7901.dtb
> > > > > arch/arm/dts/imx8mm-venice-gw7902.dtb > u-boot.its
> > > > > /bin/sh: 1: ./arch/arm/mach-imx/mkimage_fit_atf.sh: not found
> > > > >
> > > >
> > > > This has been dropped in d9a6f0eed6 ("tree: imx: remove old fit generator
> > > script")
> > >
> > > So why was that merged when it breaks several boards that are not
> > > switched to binman because of the CI issue?
> >
> > Because the FIT generator script has been broken after commit 3f04db891a
> > ("image: Check for unit addresses in FITs"), which has covered CVE-2021-27138.
> > You can see the reasoning of merging d9a6f0eed6 ("tree: imx: remove old fit
> > generator script") in the commit message.
> >
> > In addition, d9a6f0eed6 ("tree: imx: remove old fit generator script") has
> > been introduced as a part of discussion stemmed from [1], where it has been
> > pointed out that certain boards are still using old FIT generator which is
> > not working, and I've listed those board config files for maintainers to react.
> >
> 
> Andrey,
> 
> I agree removing the old fit generator is the right path but I am very
> surprised it was merged when it broke boards that had not moved to
> binman yet. There has been a warning to migrate to binman but there
> was never a deadline.
> 
> > Binman CI missing binaries verification came later I believe, that is the
> > reason we are seeing those conversions pending. But this is unrelated to the
> > FIT generator script removal, which was broken anyways.
> >
> 
> I have not followed the discussion about what was wrong with the FIT
> generator or what was specifically 'broken' but boards at least built
> and booted with it and now they do not build. I do know there was a
> time where I needed a patch that dealt with '@' symbols and I'm not
> sure if that ever got merged before the FIT generator was simply
> removed. Again, I hadn't thought much of it because I had binman
> conversion patches in flight not realizing they would get stuck
> because of CI.
> 
> I don't really know anything about U-Boot CI but I'm also surprised it
> doesn't point out the fact that several boards won't currently build.

Note that all boards currently _do_ build because whatever is missing
today isn't part of the "all" target.  This is likely because there's a
few build targets that rely on some CONFIG options that in turn are not
part of Kconfig and so don't always work.

[snip]
> I don't know exactly how the U-Boot release schedule works and when
> 2021.01 is released but in order to save these boards from being
> broken the following would have to occur:

I guess https://www.denx.de/wiki/U-Boot/ReleaseCycle needs to be more
widely publicized?

> apply Heiko's [PATCH v4] binman: add support for creating dummy files
> for external blobs
> (https://patchwork.ozlabs.org/project/uboot/list/?series=279595)
> apply the conversion to binman series that has been pending because of
> the CI breakage for these boards:
> - Adam Ford: imx8mm_beacon* boards
> - Tim Harvey: imx8mm_venice boards
> - Andrey Zhizhikin: imx8mq_evk
> - Peng Fan: imx8mq_phanbell and pico-imx8mq
> 
> That would still leave the following boards broken as nobody has
> submitted binman patches for them. These are both maintained by Oliver
> Graute (added to cc):
> imx8qm_rom7720_a1_4G_defconfig
> cgtqmx8_defconfig
> 
> I believe Stefano is not currently available and I'm not sure when he
> is back to merge the pending binman conversion series. Additionally
> some of these series may need to be rebased (I know I had to do that
> twice because of things being moved to Kconfig)

I'm doing one last test of reverting d9a6f0eed6 which should also
restore functionality for now, yes?

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20220106/4efeb8f5/attachment.sig>