[PATCH v5 0/3] arm: kirkwood: Add support for Pogoplug V4

[Stefan Roese]

On 1/24/22 07:17, Tony Dinh wrote:
> 
> Pogoplug V4 specifications:
> 
> Kirkwood 88F6192 SoC
> 800 MHz CPU
> 1Gbs Ethernet
> 128 MB RAM
> 128 MB NAND
> 1x USB 2.0
> 2x USB 3.0 (on PCIe bus)
> 1 SDHC slot
> 1x External SATA port (USM enclosure form factor slot)
> 
> 
> Changes in v5:
> - Currently, CONFIG_RESET_PHY_R symbol is used in
> arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
> boards with mv8831116 PHY, with each board defines the function
> reset_phy(). Undefine it for this board.
> - Add board_eth_init() to use uclass mvgbe to handle all Ethernet
> PHY configuration and bring up the network.
> 
> Changes in v4:
> - Remove CONFIG_FEATURE_COMMAND_EDITING and ifdefs for CMD_NET
> in include header
> 
> Changes in v3:
> - Migrate symbols from board include header to Kconfig
> - Squash board file small patches into one patch
> - Migrate config symbols from board include header to defconfig
> - Remove obsolete config symbols from header file
> - Don't use ifdefs for unselectable config symbols in header file
> 
> Changes in v2:
> - Use mainline Linux DTS version
> - Move constants to .c file and remove header file
> - Use canonical format for defconfig file
> 
> Tony Dinh (3):
>    arm: kirkwood: Pogoplug-V4 : Add DTS files
>    arm: kirkwood: Pogoplug-V4 : Add Kconfig files
>    arm: kirkwood: Pogoplug-V4 : Add board implementation files
> 
>   arch/arm/dts/Makefile                       |   1 +
>   arch/arm/dts/kirkwood-pogoplug-series-4.dts | 180 ++++++++++++++++++++
>   arch/arm/mach-kirkwood/Kconfig              |   6 +
>   board/cloudengines/pogo_v4/Kconfig          |  16 ++
>   board/cloudengines/pogo_v4/MAINTAINERS      |   6 +
>   board/cloudengines/pogo_v4/Makefile         |  10 ++
>   board/cloudengines/pogo_v4/kwbimage.cfg     | 148 ++++++++++++++++
>   board/cloudengines/pogo_v4/pogo_v4.c        | 148 ++++++++++++++++
>   configs/pogo_v4_defconfig                   |  79 +++++++++
>   include/configs/pogo_v4.h                   |  56 ++++++
>   10 files changed, 650 insertions(+)
>   create mode 100644 arch/arm/dts/kirkwood-pogoplug-series-4.dts
>   create mode 100644 board/cloudengines/pogo_v4/Kconfig
>   create mode 100644 board/cloudengines/pogo_v4/MAINTAINERS
>   create mode 100644 board/cloudengines/pogo_v4/Makefile
>   create mode 100644 board/cloudengines/pogo_v4/kwbimage.cfg
>   create mode 100644 board/cloudengines/pogo_v4/pogo_v4.c
>   create mode 100644 configs/pogo_v4_defconfig
>   create mode 100644 include/configs/pogo_v4.h
> 

Applied to u-boot-marvell/master

Thanks,
Stefan