[PATCH u-boot-marvell] PLEASE TEST ddr: marvell: a38x: fix SPLIT_OUT_MIX state decision

[Marek Behún]

On Wed, 5 Jan 2022 11:10:51 +1300
Chris Packham <judge.packham at gmail.com> wrote:

> Hi Marek,
> 
> On Wed, Jan 5, 2022 at 9:28 AM Marek Behún <kabel at kernel.org> wrote:
> >
> > From: Marek Behún <marek.behun at nic.cz>
> >
> > Hello,
> >
> > continuing my  last discussion with Chris [1] about this, could you
> > please test this change? (For Chris, mainly on your x530, since last
> > time you said it hanged your board in SPL.)  
> 
> I still get a hang after "Returning to BootROM (return address
> 0xffff05c4)... " (after the DDR training).

Hi Chris,

would it be possible for me to connect to a computer to which the x530
is connected via UART so that I can debug it? Could you prepare such an
environment? It would also need a mechanism to reset the board remotely
somehow. I prepared a similar remote debugging environment for Marvell
when they were solving some issues for us.

If not, then I guess we will just have to send debugging code and
results back and forth.

Marek