[PATCH 2/2] udoo: neo: Do not print the Model information

[Tom Rini]

On Mon, Jan 03, 2022 at 12:15:12PM -0300, Fabio Estevam wrote:

> By default the Model information from DT is printed:
> 
> CPU:   Freescale i.MX6SX rev1.2 996 MHz (running at 792 MHz)
> CPU:   Extended Commercial temperature grade (-20C to 105C) at 63C
> Reset cause: POR
> Model: UDOO Neo Basic
> Board: UDOO Neo FULL
> I2C:   ready
> 
> As the udoo basic DT is used, such output may be confusing.
> 
> Improve it by only printing the Board model instead, which is
> read from the board identification GPIOs.
> 
> Signed-off-by: Fabio Estevam <festevam at gmail.com>
> Acked-by: Tommaso Merciai <tomm.merciai at gmail.com>
> Tested-by: Tommaso Merciai <tomm.merciai at gmail.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20220107/4c2e30e4/attachment.sig>