[PATCH] net: phy: add TI DP83869HM ethernet driver
Ramon Fried
rfried.dev at gmail.com
Sat Jan 15 17:51:01 CET 2022
On Wed, Dec 29, 2021 at 9:26 PM Ramon Fried <rfried.dev at gmail.com> wrote:
>
> On Wed, Dec 22, 2021 at 9:58 AM Christian Gmeiner
> <christian.gmeiner at gmail.com> wrote:
> >
> > From: Dominic Rath <rath at ibv-augsburg.net>
> >
> > This driver is based on an older downstream TI kernel, with
> > changes and cleanups to work with mainline device-tree bindings.
> >
> > Signed-off-by: Dominic Rath <rath at ibv-augsburg.net>
> > Signed-off-by: Christian Gmeiner <christian.gmeiner at gmail.com>
> > ---
> > drivers/net/phy/Kconfig | 6 +
> > drivers/net/phy/Makefile | 1 +
> > drivers/net/phy/dp83869.c | 507 +++++++++++++++++++++++++++
> > drivers/net/phy/ti_phy_init.c | 4 +
> > drivers/net/phy/ti_phy_init.h | 1 +
> > include/dt-bindings/net/ti-dp83869.h | 60 ++++
> > 6 files changed, 579 insertions(+)
> > create mode 100644 drivers/net/phy/dp83869.c
> > create mode 100644 include/dt-bindings/net/ti-dp83869.h
> >
> > diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
> > index 68ee7d7a2d..c6e58058d9 100644
> > --- a/drivers/net/phy/Kconfig
> > +++ b/drivers/net/phy/Kconfig
> > @@ -290,6 +290,12 @@ config PHY_TI_DP83867
> > ---help---
> > Adds support for the TI DP83867 1Gbit PHY.
> >
> > +config PHY_TI_DP83869
> > + select PHY_TI
> > + bool "Texas Instruments Ethernet DP83869 PHY support"
> > + ---help---
> > + Adds support for the TI DP83869 1Gbit PHY.
> > +
> > config PHY_TI_GENERIC
> > select PHY_TI
> > bool "Texas Instruments Generic Ethernet PHYs support"
> > diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
> > index 218b8c7669..77f7f60621 100644
> > --- a/drivers/net/phy/Makefile
> > +++ b/drivers/net/phy/Makefile
> > @@ -29,6 +29,7 @@ obj-$(CONFIG_PHY_SMSC) += smsc.o
> > obj-$(CONFIG_PHY_TERANETICS) += teranetics.o
> > obj-$(CONFIG_PHY_TI) += ti_phy_init.o
> > obj-$(CONFIG_PHY_TI_DP83867) += dp83867.o
> > +obj-$(CONFIG_PHY_TI_DP83869) += dp83869.o
> > obj-$(CONFIG_PHY_XILINX) += xilinx_phy.o
> > obj-$(CONFIG_PHY_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o
> > obj-$(CONFIG_PHY_VITESSE) += vitesse.o
> > diff --git a/drivers/net/phy/dp83869.c b/drivers/net/phy/dp83869.c
> > new file mode 100644
> > index 0000000000..c9461185cf
> > --- /dev/null
> > +++ b/drivers/net/phy/dp83869.c
> > @@ -0,0 +1,507 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * TI PHY drivers
> > + *
> > + */
> > +
> > +#include <common.h>
> > +#include <phy.h>
> > +#include <linux/compat.h>
> > +#include <malloc.h>
> > +
> > +#include <dm.h>
> > +#include <dt-bindings/net/ti-dp83869.h>
> > +
> > +/* TI DP83869 */
> > +#define DP83869_DEVADDR 0x1f
> > +
> > +#define MII_DP83869_PHYCTRL 0x10
> > +#define MII_DP83869_MICR 0x12
> > +#define MII_DP83869_CFG2 0x14
> > +#define MII_DP83869_BISCR 0x16
> > +#define DP83869_CTRL 0x1f
> > +#define DP83869_CFG4 0x1e
> > +
> > +/* Extended Registers */
> > +#define DP83869_GEN_CFG3 0x0031
> > +#define DP83869_RGMIICTL 0x0032
> > +#define DP83869_STRAP_STS1 0x006E
> > +#define DP83869_RGMIIDCTL 0x0086
> > +#define DP83869_IO_MUX_CFG 0x0170
> > +#define DP83869_OP_MODE 0x01df
> > +#define DP83869_FX_CTRL 0x0c00
> > +
> > +#define DP83869_SW_RESET BIT(15)
> > +#define DP83869_SW_RESTART BIT(14)
> > +
> > +/* MICR Interrupt bits */
> > +#define MII_DP83869_MICR_AN_ERR_INT_EN BIT(15)
> > +#define MII_DP83869_MICR_SPEED_CHNG_INT_EN BIT(14)
> > +#define MII_DP83869_MICR_DUP_MODE_CHNG_INT_EN BIT(13)
> > +#define MII_DP83869_MICR_PAGE_RXD_INT_EN BIT(12)
> > +#define MII_DP83869_MICR_AUTONEG_COMP_INT_EN BIT(11)
> > +#define MII_DP83869_MICR_LINK_STS_CHNG_INT_EN BIT(10)
> > +#define MII_DP83869_MICR_FALSE_CARRIER_INT_EN BIT(8)
> > +#define MII_DP83869_MICR_SLEEP_MODE_CHNG_INT_EN BIT(4)
> > +#define MII_DP83869_MICR_WOL_INT_EN BIT(3)
> > +#define MII_DP83869_MICR_XGMII_ERR_INT_EN BIT(2)
> > +#define MII_DP83869_MICR_POL_CHNG_INT_EN BIT(1)
> > +#define MII_DP83869_MICR_JABBER_INT_EN BIT(0)
> > +
> > +#define MII_DP83869_BMCR_DEFAULT (BMCR_ANENABLE | \
> > + BMCR_FULLDPLX | \
> > + BMCR_SPEED1000)
> > +
> > +/* This is the same bit mask as the BMCR so re-use the BMCR default */
> > +#define DP83869_FX_CTRL_DEFAULT MII_DP83869_BMCR_DEFAULT
> > +
> > +/* CFG1 bits */
> > +#define DP83869_CFG1_DEFAULT (ADVERTISE_1000HALF | \
> > + ADVERTISE_1000FULL | \
> > + CTL1000_AS_MASTER)
> > +
> > +/* RGMIICTL bits */
> > +#define DP83869_RGMII_TX_CLK_DELAY_EN BIT(1)
> > +#define DP83869_RGMII_RX_CLK_DELAY_EN BIT(0)
> > +
> > +/* STRAP_STS1 bits */
> > +#define DP83869_STRAP_OP_MODE_MASK GENMASK(2, 0)
> > +#define DP83869_STRAP_STS1_RESERVED BIT(11)
> > +#define DP83869_STRAP_MIRROR_ENABLED BIT(12)
> > +
> > +/* PHY CTRL bits */
> > +#define DP83869_PHYCR_RX_FIFO_DEPTH_SHIFT 12
> > +#define DP83869_PHYCR_RX_FIFO_DEPTH_MASK GENMASK(13, 12)
> > +#define DP83869_PHYCR_TX_FIFO_DEPTH_SHIFT 14
> > +#define DP83869_PHYCR_TX_FIFO_DEPTH_MASK GENMASK(15, 14)
> > +#define DP83869_PHYCR_RESERVED_MASK BIT(11)
> > +#define DP83869_PHYCR_MDI_CROSSOVER_SHIFT 5
> > +#define DP83869_PHYCR_MDI_CROSSOVER_MDIX 2
> > +#define DP83869_PHY_CTRL_DEFAULT 0x48
> > +
> > +/* RGMIIDCTL bits */
> > +#define DP83869_RGMII_TX_CLK_DELAY_SHIFT 4
> > +#define DP83869_CLK_DELAY_DEF 7
> > +
> > +/* CFG2 bits */
> > +#define MII_DP83869_CFG2_SPEEDOPT_10EN 0x0040
> > +#define MII_DP83869_CFG2_SGMII_AUTONEGEN 0x0080
> > +#define MII_DP83869_CFG2_SPEEDOPT_ENH 0x0100
> > +#define MII_DP83869_CFG2_SPEEDOPT_CNT 0x0800
> > +#define MII_DP83869_CFG2_SPEEDOPT_INTLOW 0x2000
> > +#define MII_DP83869_CFG2_MASK 0x003F
> > +
> > +/* User setting - can be taken from DTS */
> > +#define DEFAULT_FIFO_DEPTH DP83869_PHYCR_FIFO_DEPTH_4_B_NIB
> > +
> > +/* IO_MUX_CFG bits */
> > +#define DP83869_IO_MUX_CFG_IO_IMPEDANCE_CTRL 0x1f
> > +
> > +#define DP83869_IO_MUX_CFG_IO_IMPEDANCE_MAX 0x0
> > +#define DP83869_IO_MUX_CFG_IO_IMPEDANCE_MIN 0x1f
> > +#define DP83869_IO_MUX_CFG_CLK_O_DISABLE BIT(6)
> > +#define DP83869_IO_MUX_CFG_CLK_O_SEL_SHIFT 8
> > +#define DP83869_IO_MUX_CFG_CLK_O_SEL_MASK \
> > + GENMASK(0x1f, DP83869_IO_MUX_CFG_CLK_O_SEL_SHIFT)
> > +
> > +/* CFG3 bits */
> > +#define DP83869_CFG3_PORT_MIRROR_EN BIT(0)
> > +
> > +/* OP MODE bits */
> > +#define DP83869_OP_MODE_MII BIT(5)
> > +#define DP83869_SGMII_RGMII_BRIDGE BIT(6)
> > +
> > +enum {
> > + DP83869_PORT_MIRRORING_KEEP,
> > + DP83869_PORT_MIRRORING_EN,
> > + DP83869_PORT_MIRRORING_DIS,
> > +};
> > +
> > +struct dp83869_private {
> > + int tx_fifo_depth;
> > + int rx_fifo_depth;
> > + s32 rx_int_delay;
> > + s32 tx_int_delay;
> > + int io_impedance;
> > + int port_mirroring;
> > + bool set_clk_output;
> > + int clk_output_sel;
> > + int mode;
> > +};
> > +
> > +static int dp83869_readext(struct phy_device *phydev, int addr, int devad, int reg)
> > +{
> > + return phy_read_mmd(phydev, devad, reg);
> > +}
> > +
> > +static int dp83869_writeext(struct phy_device *phydev, int addr, int devad, int reg, u16 val)
> > +{
> > + return phy_write_mmd(phydev, devad, reg, val);
> > +}
> > +
> > +static int dp83869_config_port_mirroring(struct phy_device *phydev)
> > +{
> > + struct dp83869_private *dp83869 =
> > + (struct dp83869_private *)phydev->priv;
> > + u16 val;
> > +
> > + val = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_CFG4);
> > +
> > + if (dp83869->port_mirroring == DP83869_PORT_MIRRORING_EN)
> > + val |= DP83869_CFG3_PORT_MIRROR_EN;
> > + else
> > + val &= ~DP83869_CFG3_PORT_MIRROR_EN;
> > +
> > + phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_CFG4, val);
> > +
> > + return 0;
> > +}
> > +
> > +#ifdef CONFIG_DM_ETH
> > +static const int dp83869_internal_delay[] = {250, 500, 750, 1000, 1250, 1500,
> > + 1750, 2000, 2250, 2500, 2750, 3000,
> > + 3250, 3500, 3750, 4000};
> > +
> > +static int dp83869_set_strapped_mode(struct phy_device *phydev)
> > +{
> > + struct dp83869_private *dp83869 = phydev->priv;
> > + int val;
> > +
> > + val = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_STRAP_STS1);
> > + if (val < 0)
> > + return val;
> > +
> > + dp83869->mode = val & DP83869_STRAP_OP_MODE_MASK;
> > +
> > + return 0;
> > +}
> > +
> > +/**
> > + * dp83869_data_init - Convenience function for setting PHY specific data
> > + *
> > + * @phydev: the phy_device struct
> > + */
> > +static int dp83869_of_init(struct phy_device *phydev)
> > +{
> > + struct dp83869_private * const dp83869 = phydev->priv;
> > + const int delay_entries = ARRAY_SIZE(dp83869_internal_delay);
> > + int ret;
> > + ofnode node;
> > +
> > + node = phy_get_ofnode(phydev);
> > + if (!ofnode_valid(node))
> > + return -EINVAL;
> > +
> > + dp83869->io_impedance = -EINVAL;
> > +
> > + /* Optional configuration, set to default if required */
> > + dp83869->clk_output_sel = ofnode_read_u32_default(node, "ti,clk-output-sel",
> > + DP83869_CLK_O_SEL_CHN_A_RCLK);
> > +
> > + if (dp83869->clk_output_sel > DP83869_CLK_O_SEL_REF_CLK &&
> > + dp83869->clk_output_sel != DP83869_CLK_O_SEL_OFF)
> > + dp83869->clk_output_sel = DP83869_CLK_O_SEL_REF_CLK;
> > +
> > + /* If operation mode is not set use setting from straps */
> > + ret = ofnode_read_s32(node, "ti,op-mode", &dp83869->mode);
> > + if (ret == 0) {
> > + if (dp83869->mode < DP83869_RGMII_COPPER_ETHERNET ||
> > + dp83869->mode > DP83869_SGMII_COPPER_ETHERNET)
> > + return -EINVAL;
> > + } else {
> > + ret = dp83869_set_strapped_mode(phydev);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + if (ofnode_read_bool(node, "ti,max-output-impedance"))
> > + dp83869->io_impedance = DP83869_IO_MUX_CFG_IO_IMPEDANCE_MAX;
> > + else if (ofnode_read_bool(node, "ti,min-output-impedance"))
> > + dp83869->io_impedance = DP83869_IO_MUX_CFG_IO_IMPEDANCE_MIN;
> > +
> > + if (ofnode_read_bool(node, "enet-phy-lane-swap")) {
> > + dp83869->port_mirroring = DP83869_PORT_MIRRORING_EN;
> > + } else {
> > + ret = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_STRAP_STS1);
> > +
> > + if (ret < 0)
> > + return ret;
> > +
> > + if (ret & DP83869_STRAP_MIRROR_ENABLED)
> > + dp83869->port_mirroring = DP83869_PORT_MIRRORING_EN;
> > + else
> > + dp83869->port_mirroring = DP83869_PORT_MIRRORING_DIS;
> > + }
> > +
> > + dp83869->rx_fifo_depth = ofnode_read_s32_default(node, "rx-fifo-depth",
> > + DP83869_PHYCR_FIFO_DEPTH_4_B_NIB);
> > +
> > + dp83869->tx_fifo_depth = ofnode_read_s32_default(node, "tx-fifo-depth",
> > + DP83869_PHYCR_FIFO_DEPTH_4_B_NIB);
> > +
> > + /* RX delay *must* be specified if internal delay of RX is used. */
> > + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
> > + phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
> > + dp83869->rx_int_delay = ofnode_read_u32_default(node, "rx-internal-delay-ps",
> > + DP83869_CLK_DELAY_DEF);
> > + if (dp83869->rx_int_delay > delay_entries) {
> > + dp83869->rx_int_delay = DP83869_CLK_DELAY_DEF;
> > + pr_debug("rx-internal-delay-ps not set/invalid, default to %ups\n",
> > + dp83869_internal_delay[dp83869->rx_int_delay]);
> > + }
> > +
> > + dp83869->rx_int_delay = dp83869_internal_delay[dp83869->rx_int_delay];
> > + }
> > +
> > + /* TX delay *must* be specified if internal delay of RX is used. */
> > + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
> > + phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
> > + dp83869->tx_int_delay = ofnode_read_u32_default(node, "tx-internal-delay-ps",
> > + DP83869_CLK_DELAY_DEF);
> > + if (dp83869->tx_int_delay > delay_entries) {
> > + dp83869->tx_int_delay = DP83869_CLK_DELAY_DEF;
> > + pr_debug("tx-internal-delay-ps not set/invalid, default to %ups\n",
> > + dp83869_internal_delay[dp83869->tx_int_delay]);
> > + }
> > +
> > + dp83869->tx_int_delay = dp83869_internal_delay[dp83869->tx_int_delay];
> > + }
> > +
> > + return 0;
> > +}
> > +#else
> > +static int dp83869_of_init(struct phy_device *phydev)
> > +{
> > + struct dp83869_private *dp83869 = phydev->priv;
> > +
> > + dp83869->rx_int_delay = DP83869_RGMIIDCTL_2_25_NS;
> > + dp83869->tx_int_delay = DP83869_RGMIIDCTL_2_75_NS;
> > + dp83869->fifo_depth = DEFAULT_FIFO_DEPTH;
> > + dp83869->io_impedance = -EINVAL;
> > +
> > + return 0;
> > +}
> > +#endif /* CONFIG_OF_MDIO */
> > +
> > +static int dp83869_configure_rgmii(struct phy_device *phydev,
> > + struct dp83869_private *dp83869)
> > +{
> > + int ret = 0, val;
> > +
> > + if (phy_interface_is_rgmii(phydev)) {
> > + val = phy_read(phydev, MDIO_DEVAD_NONE, MII_DP83869_PHYCTRL);
> > + if (val < 0)
> > + return val;
> > +
> > + val &= ~(DP83869_PHYCR_TX_FIFO_DEPTH_MASK | DP83869_PHYCR_RX_FIFO_DEPTH_MASK);
> > + val |= (dp83869->tx_fifo_depth << DP83869_PHYCR_TX_FIFO_DEPTH_SHIFT);
> > + val |= (dp83869->rx_fifo_depth << DP83869_PHYCR_RX_FIFO_DEPTH_SHIFT);
> > +
> > + ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83869_PHYCTRL, val);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + if (dp83869->io_impedance >= 0) {
> > + val = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_IO_MUX_CFG);
> > +
> > + val &= ~DP83869_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
> > + val |= dp83869->io_impedance & DP83869_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
> > +
> > + ret = phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_IO_MUX_CFG, val);
> > +
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static int dp83869_configure_mode(struct phy_device *phydev,
> > + struct dp83869_private *dp83869)
> > +{
> > + int phy_ctrl_val;
> > + int ret, val;
> > +
> > + if (dp83869->mode < DP83869_RGMII_COPPER_ETHERNET ||
> > + dp83869->mode > DP83869_SGMII_COPPER_ETHERNET)
> > + return -EINVAL;
> > +
> > + /* Below init sequence for each operational mode is defined in
> > + * section 9.4.8 of the datasheet.
> > + */
> > + ret = phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_OP_MODE,
> > + dp83869->mode);
> > + if (ret)
> > + return ret;
> > +
> > + ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, MII_DP83869_BMCR_DEFAULT);
> > + if (ret)
> > + return ret;
> > +
> > + phy_ctrl_val = (dp83869->rx_fifo_depth << DP83869_PHYCR_RX_FIFO_DEPTH_SHIFT |
> > + dp83869->tx_fifo_depth << DP83869_PHYCR_TX_FIFO_DEPTH_SHIFT |
> > + DP83869_PHY_CTRL_DEFAULT);
> > +
> > + switch (dp83869->mode) {
> > + case DP83869_RGMII_COPPER_ETHERNET:
> > + ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83869_PHYCTRL,
> > + phy_ctrl_val);
> > + if (ret)
> > + return ret;
> > +
> > + ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, DP83869_CFG1_DEFAULT);
> > + if (ret)
> > + return ret;
> > +
> > + ret = dp83869_configure_rgmii(phydev, dp83869);
> > + if (ret)
> > + return ret;
> > + break;
> > + case DP83869_RGMII_SGMII_BRIDGE:
> > + val = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_OP_MODE);
> > +
> > + val |= DP83869_SGMII_RGMII_BRIDGE;
> > +
> > + ret = phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_OP_MODE, val);
> > +
> > + if (ret)
> > + return ret;
> > +
> > + ret = phy_write_mmd(phydev, DP83869_DEVADDR,
> > + DP83869_FX_CTRL, DP83869_FX_CTRL_DEFAULT);
> > + if (ret)
> > + return ret;
> > +
> > + break;
> > + case DP83869_1000M_MEDIA_CONVERT:
> > + ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83869_PHYCTRL,
> > + phy_ctrl_val);
> > + if (ret)
> > + return ret;
> > +
> > + ret = phy_write_mmd(phydev, DP83869_DEVADDR,
> > + DP83869_FX_CTRL, DP83869_FX_CTRL_DEFAULT);
> > + if (ret)
> > + return ret;
> > + break;
> > + case DP83869_100M_MEDIA_CONVERT:
> > + ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83869_PHYCTRL,
> > + phy_ctrl_val);
> > + if (ret)
> > + return ret;
> > + break;
> > + case DP83869_SGMII_COPPER_ETHERNET:
> > + ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83869_PHYCTRL,
> > + phy_ctrl_val);
> > + if (ret)
> > + return ret;
> > +
> > + ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, DP83869_CFG1_DEFAULT);
> > + if (ret)
> > + return ret;
> > +
> > + ret = phy_write_mmd(phydev, DP83869_DEVADDR,
> > + DP83869_FX_CTRL, DP83869_FX_CTRL_DEFAULT);
> > + if (ret)
> > + return ret;
> > +
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static int dp83869_config(struct phy_device *phydev)
> > +{
> > + struct dp83869_private *dp83869;
> > + unsigned int val;
> > + int ret;
> > +
> > + dp83869 = (struct dp83869_private *)phydev->priv;
> > +
> > + ret = dp83869_of_init(phydev);
> > + if (ret)
> > + return ret;
> > +
> > + ret = dp83869_configure_mode(phydev, dp83869);
> > + if (ret)
> > + return ret;
> > +
> > + if (dp83869->port_mirroring != DP83869_PORT_MIRRORING_KEEP)
> > + dp83869_config_port_mirroring(phydev);
> > +
> > + /* Clock output selection if muxing property is set */
> > + if (dp83869->clk_output_sel != DP83869_CLK_O_SEL_REF_CLK) {
> > + val = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_IO_MUX_CFG);
> > +
> > + val &= ~DP83869_IO_MUX_CFG_CLK_O_SEL_MASK;
> > + val |= dp83869->clk_output_sel << DP83869_IO_MUX_CFG_CLK_O_SEL_SHIFT;
> > +
> > + ret = phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_IO_MUX_CFG, val);
> > +
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + if (phy_interface_is_rgmii(phydev)) {
> > + ret = phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_RGMIIDCTL,
> > + dp83869->rx_int_delay |
> > + dp83869->tx_int_delay << DP83869_RGMII_TX_CLK_DELAY_SHIFT);
> > + if (ret)
> > + return ret;
> > +
> > + val = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_RGMIICTL);
> > + val |= (DP83869_RGMII_TX_CLK_DELAY_EN |
> > + DP83869_RGMII_RX_CLK_DELAY_EN);
> > +
> > + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
> > + val &= ~(DP83869_RGMII_TX_CLK_DELAY_EN |
> > + DP83869_RGMII_RX_CLK_DELAY_EN);
> > +
> > + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
> > + val &= ~DP83869_RGMII_TX_CLK_DELAY_EN;
> > +
> > + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
> > + val &= ~DP83869_RGMII_RX_CLK_DELAY_EN;
> > +
> > + ret = phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_RGMIICTL,
> > + val);
> > + }
> > +
> > + genphy_config_aneg(phydev);
> > + return 0;
> > +}
> > +
> > +static int dp83869_probe(struct phy_device *phydev)
> > +{
> > + struct dp83869_private *dp83869;
> > +
> > + dp83869 = kzalloc(sizeof(*dp83869), GFP_KERNEL);
> > + if (!dp83869)
> > + return -ENOMEM;
> > +
> > + phydev->priv = dp83869;
> > + return 0;
> > +}
> > +
> > +static struct phy_driver DP83869_driver = {
> > + .name = "TI DP83869",
> > + .uid = 0x2000a0f1,
> > + .mask = 0xfffffff0,
> > + .features = PHY_GBIT_FEATURES,
> > + .probe = dp83869_probe,
> > + .config = &dp83869_config,
> > + .startup = &genphy_startup,
> > + .shutdown = &genphy_shutdown,
> > + .readext = dp83869_readext,
> > + .writeext = dp83869_writeext
> > +};
> > +
> > +int phy_dp83869_init(void)
> > +{
> > + phy_register(&DP83869_driver);
> > + return 0;
> > +}
> > diff --git a/drivers/net/phy/ti_phy_init.c b/drivers/net/phy/ti_phy_init.c
> > index 50eff77692..075b19a39f 100644
> > --- a/drivers/net/phy/ti_phy_init.c
> > +++ b/drivers/net/phy/ti_phy_init.c
> > @@ -88,6 +88,10 @@ int phy_ti_init(void)
> > phy_dp83867_init();
> > #endif
> >
> > +#ifdef CONFIG_PHY_TI_DP83869
> > + phy_dp83869_init();
> > +#endif
> > +
> > #ifdef CONFIG_PHY_TI_GENERIC
> > phy_register(&dp83822_driver);
> > phy_register(&dp83825s_driver);
> > diff --git a/drivers/net/phy/ti_phy_init.h b/drivers/net/phy/ti_phy_init.h
> > index 6c7f6c640a..bcb3d320d3 100644
> > --- a/drivers/net/phy/ti_phy_init.h
> > +++ b/drivers/net/phy/ti_phy_init.h
> > @@ -11,5 +11,6 @@
> > #define _TI_GEN_PHY_H
> >
> > int phy_dp83867_init(void);
> > +int phy_dp83869_init(void);
> >
> > #endif /* _TI_GEN_PHY_H */
> > diff --git a/include/dt-bindings/net/ti-dp83869.h b/include/dt-bindings/net/ti-dp83869.h
> > new file mode 100644
> > index 0000000000..b3a5ac4a17
> > --- /dev/null
> > +++ b/include/dt-bindings/net/ti-dp83869.h
> > @@ -0,0 +1,60 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * TI DP83869 PHY drivers
> > + *
> > + */
> > +
> > +#ifndef _DT_BINDINGS_TI_DP83869_H
> > +#define _DT_BINDINGS_TI_DP83869_H
> > +
> > +/* PHY CTRL bits */
> > +#define DP83869_PHYCR_FIFO_DEPTH_3_B_NIB 0x00
> > +#define DP83869_PHYCR_FIFO_DEPTH_4_B_NIB 0x01
> > +#define DP83869_PHYCR_FIFO_DEPTH_6_B_NIB 0x02
> > +#define DP83869_PHYCR_FIFO_DEPTH_8_B_NIB 0x03
> > +
> > +/* RGMIIDCTL internal delay for rx and tx */
> > +#define DP83869_RGMIIDCTL_250_PS 0x0
> > +#define DP83869_RGMIIDCTL_500_PS 0x1
> > +#define DP83869_RGMIIDCTL_750_PS 0x2
> > +#define DP83869_RGMIIDCTL_1_NS 0x3
> > +#define DP83869_RGMIIDCTL_1_25_NS 0x4
> > +#define DP83869_RGMIIDCTL_1_50_NS 0x5
> > +#define DP83869_RGMIIDCTL_1_75_NS 0x6
> > +#define DP83869_RGMIIDCTL_2_00_NS 0x7
> > +#define DP83869_RGMIIDCTL_2_25_NS 0x8
> > +#define DP83869_RGMIIDCTL_2_50_NS 0x9
> > +#define DP83869_RGMIIDCTL_2_75_NS 0xa
> > +#define DP83869_RGMIIDCTL_3_00_NS 0xb
> > +#define DP83869_RGMIIDCTL_3_25_NS 0xc
> > +#define DP83869_RGMIIDCTL_3_50_NS 0xd
> > +#define DP83869_RGMIIDCTL_3_75_NS 0xe
> > +#define DP83869_RGMIIDCTL_4_00_NS 0xf
> > +
> > +/* IO_MUX_CFG - Clock output selection */
> > +#define DP83869_CLK_O_SEL_CHN_A_RCLK 0x0
> > +#define DP83869_CLK_O_SEL_CHN_B_RCLK 0x1
> > +#define DP83869_CLK_O_SEL_CHN_C_RCLK 0x2
> > +#define DP83869_CLK_O_SEL_CHN_D_RCLK 0x3
> > +#define DP83869_CLK_O_SEL_CHN_A_RCLK_DIV5 0x4
> > +#define DP83869_CLK_O_SEL_CHN_B_RCLK_DIV5 0x5
> > +#define DP83869_CLK_O_SEL_CHN_C_RCLK_DIV5 0x6
> > +#define DP83869_CLK_O_SEL_CHN_D_RCLK_DIV5 0x7
> > +#define DP83869_CLK_O_SEL_CHN_A_TCLK 0x8
> > +#define DP83869_CLK_O_SEL_CHN_B_TCLK 0x9
> > +#define DP83869_CLK_O_SEL_CHN_C_TCLK 0xA
> > +#define DP83869_CLK_O_SEL_CHN_D_TCLK 0xB
> > +#define DP83869_CLK_O_SEL_REF_CLK 0xC
> > +/* Special flag to indicate clock should be off */
> > +#define DP83869_CLK_O_SEL_OFF 0xFFFFFFFF
> > +
> > +/* OPMODE - Operation mode */
> > +#define DP83869_RGMII_COPPER_ETHERNET 0x00
> > +#define DP83869_RGMII_1000_BASE 0x01
> > +#define DP83869_RGMII_100_BASE 0x02
> > +#define DP83869_RGMII_SGMII_BRIDGE 0x03
> > +#define DP83869_1000M_MEDIA_CONVERT 0x04
> > +#define DP83869_100M_MEDIA_CONVERT 0x05
> > +#define DP83869_SGMII_COPPER_ETHERNET 0x06
> > +
> > +#endif
> > --
> > 2.33.1
> >
> Reviewed-by: Ramon Fried <rfried.dev at gmail.com>
Applied to u-boot-net/next
Thanks !
More information about the U-Boot
mailing list