[PATCH 1/3] arm: kirkwood: iConnect : Add PCIe related configs

[Stefan Roese]

On 1/2/22 05:57, Tony Dinh wrote:
> - Add MVEBU PCIe configs
> - Also add SYS_THUMB_BUILD to keep u-boot image size within 512K
> 
> Signed-off-by: Tony Dinh <mibodhi at gmail.com>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
> 
>   configs/iconnect_defconfig | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/configs/iconnect_defconfig b/configs/iconnect_defconfig
> index d8593bcdd2..bc44dbd218 100644
> --- a/configs/iconnect_defconfig
> +++ b/configs/iconnect_defconfig
> @@ -2,6 +2,7 @@ CONFIG_ARM=y
>   CONFIG_SKIP_LOWLEVEL_INIT=y
>   CONFIG_SYS_DCACHE_OFF=y
>   CONFIG_ARCH_CPU_INIT=y
> +CONFIG_SYS_THUMB_BUILD=y
>   CONFIG_ARCH_KIRKWOOD=y
>   CONFIG_SYS_TEXT_BASE=0x600000
>   CONFIG_NR_DRAM_BANKS=2
> @@ -15,9 +16,11 @@ CONFIG_SYS_LOAD_ADDR=0x800000
>   CONFIG_BOOTDELAY=3
>   CONFIG_USE_PREBOOT=y
>   # CONFIG_DISPLAY_BOARDINFO is not set
> +CONFIG_BOARD_LATE_INIT=y
>   CONFIG_SYS_PROMPT="iconnect => "
>   # CONFIG_CMD_FLASH is not set
>   CONFIG_CMD_NAND=y
> +CONFIG_CMD_PCI=y
>   CONFIG_CMD_USB=y
>   # CONFIG_CMD_SETEXPR is not set
>   CONFIG_CMD_MII=y
> @@ -40,6 +43,8 @@ CONFIG_MTD=y
>   CONFIG_MTD_RAW_NAND=y
>   CONFIG_MVGBE=y
>   CONFIG_MII=y
> +CONFIG_PCI=y
> +CONFIG_PCI_MVEBU=y
>   CONFIG_SYS_NS16550=y
>   CONFIG_USB=y
>   CONFIG_USB_EHCI_HCD=y
> 

Viele Grüße,
Stefan Roese

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de