[PATCH v3 1/3] net: NC-SI setup and handling

Joel Stanley joel at jms.id.au
Mon Jul 4 09:58:01 CEST 2022


From: Samuel Mendoza-Jonas <sam at mendozajonas.com>

Add the handling of NC-SI ethernet frames, and add a check at the start
of net_loop() to configure NC-SI before starting other network commands.
This also adds an "ncsi" command to manually start NC-SI configuration.

Signed-off-by: Samuel Mendoza-Jonas <sam at mendozajonas.com>
Signed-off-by: Joel Stanley <joel at jms.id.au>
---
v3:
 - Fix compilation. There were no configs that enabled the NCSI phy code
   so it had bitrotted
 - Use NCSI_PHY instead of CMD_NCSI so NCSI can work without the command
 - Add phy_interface_is_ncsi() helper, thanks Cédric for this suggestion
 - Only create NCSI phy device when driver is configured for it

 include/net.h          |  2 +-
 include/phy.h          |  2 ++
 cmd/net.c              | 22 ++++++++++++++++++++++
 drivers/net/phy/ncsi.c |  1 +
 drivers/net/phy/phy.c  |  9 ++++++++-
 net/net.c              | 27 ++++++++++++++++++++++++++-
 cmd/Kconfig            |  8 ++++++++
 7 files changed, 68 insertions(+), 3 deletions(-)

diff --git a/include/net.h b/include/net.h
index e3889a0bc85e..0681b8246323 100644
--- a/include/net.h
+++ b/include/net.h
@@ -558,7 +558,7 @@ extern int		net_restart_wrap;	/* Tried all network devices */
 
 enum proto_t {
 	BOOTP, RARP, ARP, TFTPGET, DHCP, PING, DNS, NFS, CDP, NETCONS, SNTP,
-	TFTPSRV, TFTPPUT, LINKLOCAL, FASTBOOT, WOL, UDP
+	TFTPSRV, TFTPPUT, LINKLOCAL, FASTBOOT, WOL, UDP, NCSI
 };
 
 extern char	net_boot_file_name[1024];/* Boot File name */
diff --git a/include/phy.h b/include/phy.h
index b32959571069..1e0f8856f629 100644
--- a/include/phy.h
+++ b/include/phy.h
@@ -583,6 +583,8 @@ static inline bool phy_interface_is_sgmii(struct phy_device *phydev)
 		phydev->interface <= PHY_INTERFACE_MODE_QSGMII;
 }
 
+bool phy_interface_is_ncsi(void);
+
 /* PHY UIDs for various PHYs that are referenced in external code */
 #define PHY_UID_CS4340		0x13e51002
 #define PHY_UID_CS4223		0x03e57003
diff --git a/cmd/net.c b/cmd/net.c
index 3619c843d838..2863fe768118 100644
--- a/cmd/net.c
+++ b/cmd/net.c
@@ -16,6 +16,7 @@
 #include <net.h>
 #include <net/udp.h>
 #include <net/sntp.h>
+#include <net/ncsi.h>
 
 static int netboot_common(enum proto_t, struct cmd_tbl *, int, char * const []);
 
@@ -524,3 +525,24 @@ U_BOOT_CMD(
 	"list - list available devices\n"
 );
 #endif // CONFIG_DM_ETH
+
+#if defined(CONFIG_CMD_NCSI)
+static int do_ncsi(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[])
+{
+	if (!phy_interface_is_ncsi() || !ncsi_active()) {
+		printf("Device not configured for NC-SI\n");
+		return CMD_RET_FAILURE;
+	}
+
+	if (net_loop(NCSI) < 0)
+		return CMD_RET_FAILURE;
+
+	return CMD_RET_SUCCESS;
+}
+
+U_BOOT_CMD(
+	ncsi,	1,	1,	do_ncsi,
+	"Configure attached NIC via NC-SI",
+	""
+);
+#endif  /* CONFIG_CMD_NCSI */
diff --git a/drivers/net/phy/ncsi.c b/drivers/net/phy/ncsi.c
index bf1e832be9f1..bb7ecebed382 100644
--- a/drivers/net/phy/ncsi.c
+++ b/drivers/net/phy/ncsi.c
@@ -9,6 +9,7 @@
 #include <log.h>
 #include <malloc.h>
 #include <phy.h>
+#include <net.h>
 #include <net/ncsi.h>
 #include <net/ncsi-pkt.h>
 #include <asm/unaligned.h>
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 1121b99abff5..d04538838852 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1026,7 +1026,7 @@ struct phy_device *phy_connect(struct mii_dev *bus, int addr,
 #endif
 
 #ifdef CONFIG_PHY_NCSI
-	if (!phydev)
+	if (!phydev && interface == PHY_INTERFACE_MODE_NCSI)
 		phydev = phy_device_create(bus, 0, PHY_NCSI_ID, false);
 #endif
 
@@ -1101,3 +1101,10 @@ int phy_modify(struct phy_device *phydev, int devad, int regnum, u16 mask,
 
 	return phy_write(phydev, devad, regnum, (ret & ~mask) | set);
 }
+
+bool phy_interface_is_ncsi(void)
+{
+	struct eth_pdata *pdata = dev_get_plat(eth_get_dev());
+
+	return pdata->phy_interface == PHY_INTERFACE_MODE_NCSI;
+}
diff --git a/net/net.c b/net/net.c
index 81905f631592..a4e645ac4425 100644
--- a/net/net.c
+++ b/net/net.c
@@ -93,6 +93,7 @@
 #include <net.h>
 #include <net/fastboot.h>
 #include <net/tftp.h>
+#include <net/ncsi.h>
 #if defined(CONFIG_CMD_PCAP)
 #include <net/pcap.h>
 #endif
@@ -410,6 +411,16 @@ int net_loop(enum proto_t protocol)
 	net_try_count = 1;
 	debug_cond(DEBUG_INT_STATE, "--- net_loop Entry\n");
 
+#ifdef CONFIG_PHY_NCSI
+	if (phy_interface_is_ncsi() && protocol != NCSI && !ncsi_active()) {
+		printf("%s: configuring NCSI first\n", __func__);
+		if (net_loop(NCSI) < 0)
+			return ret;
+		eth_init_state_only();
+		goto restart;
+	}
+#endif
+
 	bootstage_mark_name(BOOTSTAGE_ID_ETH_START, "eth_start");
 	net_init();
 	if (eth_is_on_demand_init()) {
@@ -423,6 +434,7 @@ int net_loop(enum proto_t protocol)
 	} else {
 		eth_init_state_only();
 	}
+
 restart:
 #ifdef CONFIG_USB_KEYBOARD
 	net_busy_flag = 0;
@@ -526,6 +538,11 @@ restart:
 		case WOL:
 			wol_start();
 			break;
+#endif
+#if defined(CONFIG_PHY_NCSI)
+		case NCSI:
+			ncsi_probe_packages();
+			break;
 #endif
 		default:
 			break;
@@ -637,7 +654,7 @@ restart:
 				env_set_hex("filesize", net_boot_file_size);
 				env_set_hex("fileaddr", image_load_addr);
 			}
-			if (protocol != NETCONS)
+			if (protocol != NETCONS && protocol != NCSI)
 				eth_halt();
 			else
 				eth_halt_state_only();
@@ -1321,6 +1338,11 @@ void net_process_received_packet(uchar *in_packet, int len)
 	case PROT_WOL:
 		wol_receive(ip, len);
 		break;
+#endif
+#ifdef CONFIG_PHY_NCSI
+	case PROT_NCSI:
+		ncsi_receive(et, ip, len);
+		break;
 #endif
 	}
 }
@@ -1381,6 +1403,9 @@ common:
 
 #ifdef CONFIG_CMD_RARP
 	case RARP:
+#endif
+#ifdef CONFIG_PHY_NCSI
+	case NCSI:
 #endif
 	case BOOTP:
 	case CDP:
diff --git a/cmd/Kconfig b/cmd/Kconfig
index ad36ae63c659..bbd00707727d 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -1796,6 +1796,14 @@ config CMD_LINK_LOCAL
 	help
 	  Acquire a network IP address using the link-local protocol
 
+config CMD_NCSI
+	bool "ncsi"
+	depends on PHY_NCSI
+	help
+	  Manually configure the attached NIC via NC-SI.
+	  Normally this happens automatically before other network
+	  operations.
+
 endif
 
 config CMD_ETHSW
-- 
2.35.1



More information about the U-Boot mailing list