July 2022 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri Jul 1 00:06:16 CEST 2022
Ending: Sun Jul 31 22:53:52 CEST 2022
Messages: 2642

• [PATCH 1/2] iommu: Add M2 support to Apple DART driver   Janne Grunau
  • [PATCH 2/2] arm: apple: Add initial Apple M2 support   Janne Grunau
    • [PATCH 2/2] arm: apple: Add initial Apple M2 support   Mark Kettenis
    • [PATCH 2/2] arm: apple: Add initial Apple M2 support   Tom Rini
  • [PATCH 1/2] iommu: Add M2 support to Apple DART driver   Mark Kettenis
  • [PATCH 1/2] iommu: Add M2 support to Apple DART driver   Tom Rini
• [PATCH 6/6] patman: Take project defaults into account for --help   Brian Norris
• [PATCH 0/6] patman: Small fixes plus remove --no-tree from checkpatch for linux   Brian Norris
• Pull request: u-boot-rockchip-20220630   Kever Yang
  • Pull request: u-boot-rockchip-20220630   Tom Rini
• [PATCH] toradex: tdx-cfg-block: add new toradex oui range   Marcel Ziswiler
  • [PATCH] toradex: tdx-cfg-block: add new toradex oui range   Tom Rini
• [PATCH] toradex: tdx-cfg-block: add 0068 i.mx 8m mini sku   Marcel Ziswiler
  • [PATCH] toradex: tdx-cfg-block: add 0068 i.mx 8m mini sku   Philippe Schenker
  • [PATCH] toradex: tdx-cfg-block: add 0068 i.mx 8m mini sku   Philippe Schenker
• [PATCH] serial: ns16550: Wait in debug_uart_init until tx buffer is empty   Stefan Roese
  • [PATCH] serial: ns16550: Wait in debug_uart_init until tx buffer is empty   Pali Rohár
  • [PATCH] serial: ns16550: Wait in debug_uart_init until tx buffer is empty   Tom Rini
• [PATCH] scripts/Makefile.lib: add -D__U_BOOT__ to dtc_cpp_flags   Rasmus Villemoes
  • [PATCH] scripts/Makefile.lib: add -D__U_BOOT__ to dtc_cpp_flags   Tom Rini
    • [PATCH] scripts/Makefile.lib: add -D__U_BOOT__ to dtc_cpp_flags   Rasmus Villemoes
      • [PATCH] scripts/Makefile.lib: add -D__U_BOOT__ to dtc_cpp_flags   Tom Rini
• [PATCH] arm: dts: stm32mp1: Drop fastboot and stm32prog trigger gpios on DHCOM   Johann Neuhauser
  • [PATCH] arm: dts: stm32mp1: Drop fastboot and stm32prog trigger gpios on DHCOM   Patrick DELAUNAY
  • [PATCH] arm: dts: stm32mp1: Drop fastboot and stm32prog trigger gpios on DHCOM   Patrick Delaunay
• [GIT PULL] Please pull u-boot-amlogic-20220701   Neil Armstrong
  • [GIT PULL] Please pull u-boot-amlogic-20220701   Tom Rini
• Pull request: SoCFPGA changes for commit 05dcb5be507a   Chee, Tien Fong
  • Pull request: SoCFPGA changes for commit 05dcb5be507a   Tom Rini
• [v4 03/12] spi: aspeed: Add ASPEED SPI controller driver   Cédric Le Goater
  • [v4 03/12] spi: aspeed: Add ASPEED SPI controller driver   Chin-Ting Kuo
    • [v4 03/12] spi: aspeed: Add ASPEED SPI controller driver   Cédric Le Goater
      • [v4 03/12] spi: aspeed: Add ASPEED SPI controller driver   Chin-Ting Kuo
  • [v4 03/12] spi: aspeed: Add ASPEED SPI controller driver   Joel Stanley
    • [v4 03/12] spi: aspeed: Add ASPEED SPI controller driver   Chin-Ting Kuo
      • [v4 03/12] spi: aspeed: Add ASPEED SPI controller driver   Cédric Le Goater
      • [v4 03/12] spi: aspeed: Add ASPEED SPI controller driver   Chin-Ting Kuo
• [v4 04/12] configs: aspeed: Enable SPI flash features   Cédric Le Goater
  • [v4 04/12] configs: aspeed: Enable SPI flash features   Cédric Le Goater
    • [v4 04/12] configs: aspeed: Enable SPI flash features   Chin-Ting Kuo
      • [v4 04/12] configs: aspeed: Enable SPI flash features   Cédric Le Goater
• [v4 07/12] spi-mem: Add dirmap API from Linux   Cédric Le Goater
  • [v4 07/12] spi-mem: Add dirmap API from Linux   Jagan Teki
  • [v4 07/12] spi-mem: Add dirmap API from Linux   Chin-Ting Kuo
• [v4 06/12] arm: dts: aspeed: Update SPI flash node settings   Cédric Le Goater
  • [v4 06/12] arm: dts: aspeed: Update SPI flash node settings   Chin-Ting Kuo
• [v4 11/12] mtd: spi-nor-ids: Add Winbond W25Q512JV ID   Cédric Le Goater
• [v4 12/12] spi: aspeed: Fix bug when SPI_NOR_4B_OPCODES flag is set   Cédric Le Goater
  • [v4 12/12] spi: aspeed: Fix bug when SPI_NOR_4B_OPCODES flag is set   Chin-Ting Kuo
• [PATCH] sunxi-nand: fix the PIO instead of DMA implementation   Andre Przywara
  • [PATCH] sunxi-nand: fix the PIO instead of DMA implementation   Markus Hoffrogge
  • [PATCH] sunxi-nand: fix the PIO instead of DMA implementation   Andre Przywara
• net: designware: frequent network problem like CPU not owner of tx frame   LABBE Corentin
  • net: designware: frequent network problem like CPU not owner of tx frame   Ramon Fried
• [PATCH] ARC: HSDK: permit to build out-of-tree   Corentin Labbe
• [v4 05/12] MAINTAINERS: Add ASPEED SPI driver file   Jagan Teki
• [v4 00/12] Add ASPEED SPI controller driver   Jagan Teki
• [PATCH 1/3] ram: rk3399: Fix .set_rate_index() error handling   Kever Yang
  • [PATCH 1/3] ram: rk3399: Fix .set_rate_index() error handling   Kever Yang
    • [PATCH 1/3] ram: rk3399: Fix .set_rate_index() error handling   Lee Jones
      • [PATCH 1/3] ram: rk3399: Fix .set_rate_index() error handling   Kever Yang
      • [PATCH 1/3] ram: rk3399: Fix .set_rate_index() error handling   Lee Jones
• [PATCH 2/3] ram: rk3399: Fix faulty frequency change reports   Kever Yang
  • [PATCH 2/3] ram: rk3399: Fix faulty frequency change reports   Xavier Drudis Ferran
• [PATCH 3/3] ram: rk3399: Conduct memory training at 400MHz   Kever Yang
  • [PATCH 3/3] ram: rk3399: Conduct memory training at 400MHz   Xavier Drudis Ferran
• [tiU21.01 PATCH 0/3] AM62x ESM support   Julien Panis
  • [tiU21.01 PATCH 2/3] arm64: mach-k3: am625_init: Probe ESM nodes   Julien Panis
  • [tiU21.01 PATCH 3/3] configs: am62x_evm_r5: Add support for ESM   Julien Panis
• [tiU21.01 PATCH 1/3] arm64: dts: k3-am625-r5: Add support for ESM devices   Julien Panis
• [PATCH v1] spi: nuvoton: add NPCM PSPI controller driver   Jagan Teki
• [PATCH v7 4/4] mtd: spi-nor-core: Add support for Macronix Octal flash   Jagan Teki
• [PATCH v1 0/3] AM62x ESM support   Julien Panis
  • [PATCH v1 1/3] arm64: dts: k3-am625-r5: Add support for ESM devices   Julien Panis
    • [PATCH v1 1/3] arm64: dts: k3-am625-r5: Add support for ESM devices   Tom Rini
  • [PATCH v1 2/3] arm64: mach-k3: am625_init: Probe ESM nodes   Julien Panis
    • [PATCH v1 2/3] arm64: mach-k3: am625_init: Probe ESM nodes   Tom Rini
  • [PATCH v1 3/3] configs: am62x_evm_r5: Add support for ESM   Julien Panis
    • [PATCH v1 3/3] configs: am62x_evm_r5: Add support for ESM   Tom Rini
• [PATCH] arm: dts: rockchip: rk3399: usb: ehci: Fix EHCI probe in rk3399 to access peripherals by USB 2.   Xavier Drudis Ferran
  • [PATCH] arm: dts: rockchip: rk3399: usb: ehci: Fix EHCI probe in rk3399 to access peripherals by USB 2.   Xavier Drudis Ferran
• [PATCH RFC v3 00/11] Integration of tiboot3.bin, sysfw.itb and   Alper Nebi Yasak
• [PATCH RFC v3 02/11] ti: tools: config: Add board config class to generate config binaries   Alper Nebi Yasak
• [PATCH RFC v3 03/11] ti: etype: sysfw: Add entry type for sysfw   Alper Nebi Yasak
• [PATCH RFC v3 04/11] ti: etype: dm: Add entry type for TI DM   Alper Nebi Yasak
• [PATCH RFC v3 05/11] ti: etype: x509: Add etype for x509 certificate for K3 devices   Alper Nebi Yasak
• [PATCH RFC v3 09/11] ti: dtsi: j721e: Use binman to package sysfw.itb and tiboot3.bin   Alper Nebi Yasak
• [PATCH RFC v3 10/11] ti: dtsi: j721e: Use binman to package tispl.bin   Alper Nebi Yasak
• [PATCH RFC v3 11/11] ci: world_build: test: Add requirements.txt   Alper Nebi Yasak
• [PULL next] u-boot-at91-2022.10-a   Tom Rini
• [PATCH v2 0/6] patman: Small fixes plus remove --no-tree from checkpatch for linux   Douglas Anderson
  • [PATCH v2 1/6] patman: Fix updating argument defaults from settings   Douglas Anderson
    • [PATCH v2 1/6] patman: Fix updating argument defaults from settings   Simon Glass
    • [PATCH v2 1/6] patman: Fix updating argument defaults from settings   Sean Anderson
      • [PATCH v2 1/6] patman: Fix updating argument defaults from settings   Doug Anderson
      • [PATCH v2 1/6] patman: Fix updating argument defaults from settings   Simon Glass
      • [PATCH v2 1/6] patman: Fix updating argument defaults from settings   Sean Anderson
      • [PATCH v2 1/6] patman: Fix updating argument defaults from settings   Doug Anderson
  • [PATCH v2 2/6] patman: Fix implicit command inserting   Douglas Anderson
    • [PATCH v2 2/6] patman: Fix implicit command inserting   Simon Glass
  • [PATCH v2 3/6] patman: Don't look at sys.argv when parsing settings   Douglas Anderson
    • [PATCH v2 3/6] patman: Don't look at sys.argv when parsing settings   Simon Glass
  • [PATCH v2 4/6] patman: Make most bool arguments BooleanOptionalAction   Douglas Anderson
    • [PATCH v2 4/6] patman: Make most bool arguments BooleanOptionalAction   Simon Glass
  • [PATCH v2 5/6] patman: By default don't pass "--no-tree" to checkpatch for linux   Douglas Anderson
    • [PATCH v2 5/6] patman: By default don't pass "--no-tree" to checkpatch for linux   Simon Glass
  • [PATCH v2 6/6] patman: Take project defaults into account for --help   Douglas Anderson
    • [PATCH v2 6/6] patman: Take project defaults into account for --help   Simon Glass
• [PATCH] usb: host: ehci-generic: Fix error check   Andre Przywara
  • [PATCH] usb: host: ehci-generic: Fix error check   Marek Vasut
    • [PATCH] usb: host: ehci-generic: Fix error check   Tom Rini
  • [PATCH] usb: host: ehci-generic: Fix error check   Tom Rini
• [PATCH v1] drivers: spi: sunxi: Fix spi speed settting   qianfan
  • [PATCH v1] drivers: spi: sunxi: Fix spi speed settting   qianfan
    • [PATCH v1] drivers: spi: sunxi: Fix spi speed settting   qianfan
      • [PATCH v1] drivers: spi: sunxi: Fix spi speed settting   Andre Przywara
  • [PATCH v1] drivers: spi: sunxi: Fix spi speed settting   Andre Przywara
• [PATCH v3] EFI: Fix ReadBlocks API reading incorrect sector for UCLASS_PARTITION devices   Heinrich Schuchardt
  • [PATCH v4] EFI: Fix ReadBlocks API reading incorrect sector for UCLASS_PARTITION devices   Paul Barbieri
• [PATCH v2] sunxi: psci: Fix sunxi_power_switch on sun8i-r40 platform   qianfan
• [PATCH v3 5/7] configs: imx8mm: Define CONFIG_SYS_UBOOT_BASE for i.MX8m   Adam Ford
• [PATCH v3 1/7] tools: mkimage: Add support to generate FlexSPI Header for i.MX8m   Adam Ford
• [PATCH 1/1] disk: honor CONFIG_SYS_64BIT_LBA   Heinrich Schuchardt
  • [PATCH 1/1] disk: honor CONFIG_SYS_64BIT_LBA   AKASHI Takahiro
    • [PATCH 1/1] disk: honor CONFIG_SYS_64BIT_LBA   Tom Rini
• [PATCH 1/1] xen: pvblock: honor CONFIG_SYS_64BIT_LBA   Heinrich Schuchardt
  • [PATCH 1/1] xen: pvblock: honor CONFIG_SYS_64BIT_LBA   Tom Rini
    • [PATCH 1/1] xen: pvblock: honor CONFIG_SYS_64BIT_LBA   Heinrich Schuchardt
• [PATCH 1/1] avb: honor CONFIG_SYS_64BIT_LBA   Heinrich Schuchardt
  • [PATCH 1/1] avb: honor CONFIG_SYS_64BIT_LBA   Tom Rini
    • [PATCH 1/1] avb: honor CONFIG_SYS_64BIT_LBA   Heinrich Schuchardt
      • [PATCH 1/1] avb: honor CONFIG_SYS_64BIT_LBA   Tom Rini
      • [PATCH 1/1] avb: honor CONFIG_SYS_64BIT_LBA   Heinrich Schuchardt
• Pull request for efi-2022-07-rc6   Heinrich Schuchardt
  • Pull request for efi-2022-07-rc6   Tom Rini
• [PATCH 1/1] doc: add package uuid-dev to build dependencies   Heinrich Schuchardt
• [PATCH] tools/imx8mimage: Remove the usage of IVT reserved1 field   Peng Fan (OSS)
  • [PATCH] tools/imx8mimage: Remove the usage of IVT reserved1 field   Michael Nazzareno Trimarchi
    • [PATCH] tools/imx8mimage: Remove the usage of IVT reserved1 field   Peng Fan (OSS)
      • [PATCH] tools/imx8mimage: Remove the usage of IVT reserved1 field   Michael Nazzareno Trimarchi
• [PATCH] Revert "fdtdec: drop needlessly convoluted CONFIG_PHANDLE_CHECK_SEQ"   Simon Glass
  • [PATCH] Revert "fdtdec: drop needlessly convoluted CONFIG_PHANDLE_CHECK_SEQ"   Simon Glass
    • [PATCH] Revert "fdtdec: drop needlessly convoluted CONFIG_PHANDLE_CHECK_SEQ"   Tom Rini
      • [PATCH] Revert "fdtdec: drop needlessly convoluted CONFIG_PHANDLE_CHECK_SEQ"   Simon Glass
      • [PATCH] Revert "fdtdec: drop needlessly convoluted CONFIG_PHANDLE_CHECK_SEQ"   Rasmus Villemoes
      • [PATCH] Revert "fdtdec: drop needlessly convoluted CONFIG_PHANDLE_CHECK_SEQ"   Simon Glass
      • [PATCH] Revert "fdtdec: drop needlessly convoluted CONFIG_PHANDLE_CHECK_SEQ"   Simon Glass
      • [PATCH] Revert "fdtdec: drop needlessly convoluted CONFIG_PHANDLE_CHECK_SEQ"   Tom Rini
• [PATCH] dt-bindings: nvmem: u-boot,env: add basic NVMEM cells   Rafał Miłecki
• [PATCH] pci: Add checks to prevent config space overflow   Pali Rohár
  • [PATCH] pci: Add checks to prevent config space overflow   Stefan Roese
• [PATCH 1/1] riscv: allow building w/o DHCP, SCSI, VIRTIO   Heinrich Schuchardt
  • [PATCH 1/1] riscv: allow building w/o DHCP, SCSI, VIRTIO   Heinrich Schuchardt
    • [PATCH 1/1] riscv: allow building w/o DHCP, SCSI, VIRTIO   Bin Meng
      • [PATCH 1/1] riscv: allow building w/o DHCP, SCSI, VIRTIO   Heinrich Schuchardt
  • [PATCH 1/1] riscv: allow building w/o DHCP, SCSI, VIRTIO   Bin Meng
    • [PATCH 1/1] riscv: allow building w/o DHCP, SCSI, VIRTIO   Heinrich Schuchardt
      • [PATCH 1/1] riscv: allow building w/o DHCP, SCSI, VIRTIO   Bin Meng
• rk3399 after reboot mmc1 is inaceessible   Michal Suchánek
  • rk3399 after reboot mmc1 is inaceessible   Michal Suchánek
• [PATCH 1/1] cmd: simplify do_adc_single()   Vyacheslav
  • [PATCH 1/1] cmd: simplify do_adc_single()   Heinrich Schuchardt
• [PATCH v2] board: freescale: p1_p2_rdb_pc: Add env commands norlowerboot, norupperboot, sd2boot and defboot   Pali Rohár
  • [PATCH v2] board: freescale: p1_p2_rdb_pc: Add env commands norlowerboot, norupperboot, sd2boot and defboot   Tom Rini
    • [PATCH v2] board: freescale: p1_p2_rdb_pc: Add env commands norlowerboot, norupperboot, sd2boot and defboot   Pali Rohár
• [PATCH v3] board: freescale: p1_p2_rdb_pc: Fix parsing inverted bits from boot input data   Pali Rohár
  • [PATCH v3] board: freescale: p1_p2_rdb_pc: Fix parsing inverted bits from boot input data   Pali Rohár
    • [PATCH v3] board: freescale: p1_p2_rdb_pc: Fix parsing inverted bits from boot input data   Tom Rini
      • [PATCH v3] board: freescale: p1_p2_rdb_pc: Fix parsing inverted bits from boot input data   Pali Rohár
• [PATCH] cmd: fix do_adc_single()   Vyacheslav Bocharov
  • [PATCH] cmd: fix do_adc_single()   Simon Glass
• [PATCH] image: fit: Use stack allocation macro   Tom Rini
• [PATCH] board/BuR/*: replace maintainer of BuR boards   Tom Rini
• [PATCH] MAINTAINERS: Add Dario and Michael as nand maintainers   Tom Rini
• [PATCH] sunxi: lcd: Move range from kconfig description to definition.   Michal Suchanek
• [PATCH V2 42/49] net: fec_mxc: support i.MX93   Ramon Fried
• [PATCH V2 44/49] net: dwc_eth_qos: public some functions   Ramon Fried
• [PATCH V2 45/49] net: dwc_eth_qos: move i.MX code out   Ramon Fried
• [PATCH V2 46/49] net: eqos: add function to get phy node and address   Ramon Fried
• [PATCH V2 47/49] net: dwc_eth_qos: intrdouce eqos hook eqos_get_enetaddr   Ramon Fried
• [PATCH 0/2] Command for entering mask rom USB download mode   Michal Suchanek
  • [PATCH 1/2] cmd: boot: add brom cmd to reboot to brom dnl mode   Michal Suchanek
  • [PATCH 2/2] cmd: boot: add brom cmd to reboot to FEL mode   Michal Suchanek
    • [PATCH 2/2] cmd: boot: add brom cmd to reboot to FEL mode   Andre Przywara
      • [PATCH 2/2] cmd: boot: add brom cmd to reboot to FEL mode   Michal Suchánek
  • [PATCH 0/2] Command for entering mask rom USB download mode   Andre Przywara
    • [PATCH 0/2] Command for entering mask rom USB download mode   Michal Suchánek
  • [PATCH 0/2] Command for entering mask rom USB download mode   Samuel Holland
    • [PATCH 0/2] Command for entering mask rom USB download mode   Michal Suchánek
• [PATCH V2 43/49] net: dwc_eth_qos: fix build break when CLK not enabled   Ramon Fried
• [PATCH 1/2] net: dwc_eth_qos: restore support of not cache-aligned descriptor   Ramon Fried
• [PATCH 2/2] net: dwc_eth_qos: cosmetic: reorder include files   Ramon Fried
• [ANN] U-Boot release v2022.07 DELAYED 1 week   Tom Rini
• [PATCH v6 00/13] FWU: Add FWU Multi Bank Update feature support   Sughosh Ganu
  • [PATCH v6 01/13] dt/bindings: Add bindings for FWU Metadata storage device   Sughosh Ganu
  • [PATCH v6 02/13] FWU: Add FWU metadata structure and driver for accessing metadata   Sughosh Ganu
    • [PATCH v6 02/13] FWU: Add FWU metadata structure and driver for accessing metadata   Patrick DELAUNAY
      • [PATCH v6 02/13] FWU: Add FWU metadata structure and driver for accessing metadata   Sughosh Ganu
  • [PATCH v6 03/13] FWU: Add FWU metadata access driver for GPT partitioned block devices   Sughosh Ganu
    • [PATCH v6 03/13] FWU: Add FWU metadata access driver for GPT partitioned block devices   Patrick DELAUNAY
      • [PATCH v6 03/13] FWU: Add FWU metadata access driver for GPT partitioned block devices   Sughosh Ganu
  • [PATCH v6 04/13] stm32mp1: dk2: Add a node for the FWU metadata device   Sughosh Ganu
  • [PATCH v6 05/13] stm32mp1: dk2: Add image information for capsule updates   Sughosh Ganu
    • [PATCH v6 05/13] stm32mp1: dk2: Add image information for capsule updates   Patrick DELAUNAY
  • [PATCH v6 06/13] FWU: stm32mp1: Add helper functions for accessing FWU metadata   Sughosh Ganu
    • [PATCH v6 06/13] FWU: stm32mp1: Add helper functions for accessing FWU metadata   Patrick DELAUNAY
  • [PATCH v6 07/13] FWU: STM32MP1: Add support to read boot index from backup register   Sughosh Ganu
    • [PATCH v6 07/13] FWU: STM32MP1: Add support to read boot index from backup register   Patrick DELAUNAY
  • [PATCH v6 08/13] FWU: Add boot time checks as highlighted by the FWU specification   Sughosh Ganu
  • [PATCH v6 09/13] FWU: Add support for the FWU Multi Bank Update feature   Sughosh Ganu
  • [PATCH v6 10/13] FWU: cmd: Add a command to read FWU metadata   Sughosh Ganu
  • [PATCH v6 11/13] mkeficapsule: Add support for generating empty capsules   Sughosh Ganu
  • [PATCH v6 12/13] mkeficapsule: Add support for setting OEM flags in capsule header   Sughosh Ganu
  • [PATCH v6 13/13] FWU: doc: Add documentation for the FWU feature   Sughosh Ganu
  • [PATCH v6 00/13] FWU: Add FWU Multi Bank Update feature support   Takahiro Akashi
  • [PATCH v6 00/13] FWU: Add FWU Multi Bank Update feature support   Jassi Brar
• [PATCH v8 0/4] Add octal DTR support for Macronix flash   JaimeLiao
  • [PATCH v8 1/4] mtd: spi-nor: add support for Macronix Octal flash   JaimeLiao
  • [PATCH v8 2/4] mtd: spi-nor-core: Adding different type of command extension in Soft Reset   JaimeLiao
    • [PATCH v8 2/4] mtd: spi-nor-core: Adding different type of command extension in Soft Reset   Jagan Teki
      • [PATCH v8 2/4] mtd: spi-nor-core: Adding different type of command extension in Soft Reset   liao jaime
  • [PATCH v8 3/4] mtd: spi-nor: Parse SFDP SCCR Map   JaimeLiao
  • [PATCH v8 4/4] mtd: spi-nor-core: Add support for Macronix Octal flash   JaimeLiao
    • [PATCH v8 4/4] mtd: spi-nor-core: Add support for Macronix Octal flash   Jagan Teki
      • [PATCH v8 4/4] mtd: spi-nor-core: Add support for Macronix Octal flash   liao jaime
      • [PATCH v8 4/4] mtd: spi-nor-core: Add support for Macronix Octal flash   Jagan Teki
      • [PATCH v8 4/4] mtd: spi-nor-core: Add support for Macronix Octal flash   liao jaime
      • [PATCH v8 4/4] mtd: spi-nor-core: Add support for Macronix Octal flash   Jagan Teki
• [PATCH] distroboot: Fix ubifs   Pali Rohár
  • [PATCH] distroboot: Fix ubifs   Alexander Dahl
    • [PATCH] distroboot: Fix ubifs   Pali Rohár
  • [PATCH] distroboot: Fix ubifs   Pali Rohár
  • [PATCH] distroboot: Fix ubifs   Tom Rini
• [PATCH v3 0/3] Enable NC-SI support   Joel Stanley
  • [PATCH v3 1/3] net: NC-SI setup and handling   Joel Stanley
    • [PATCH v3 1/3] net: NC-SI setup and handling   Cédric Le Goater
  • [PATCH v3 2/3] net/ftgmac100: Add NC-SI mode support   Joel Stanley
    • [PATCH v3 2/3] net/ftgmac100: Add NC-SI mode support   Cédric Le Goater
  • [PATCH v3 3/3] config/aspeed: Enable NC-SI support   Joel Stanley
    • [PATCH v3 3/3] config/aspeed: Enable NC-SI support   Cédric Le Goater
• [PATCH] watchdog: add pulse support to gpio watchdog driver   Paul Doelle
  • [PATCH] watchdog: add pulse support to gpio watchdog driver   Stefan Roese
• [SPAM] [PATCH 1/3] ram: rk3399: Fix .set_rate_index() error handling   Xavier Drudis Ferran
• [PATCH 1/2] usb: hub: introduce HUB_DEBOUNCE_TIMEOUT   Patrick Delaunay
  • [PATCH 2/2] usb: hub: increase HUB_DEBOUNCE_TIMEOUT   Patrick Delaunay
    • [PATCH 2/2] usb: hub: increase HUB_DEBOUNCE_TIMEOUT   Marek Vasut
• uuu using u-boot-with-spl.imx   Michael Nazzareno Trimarchi
  • uuu using u-boot-with-spl.imx   Michael Nazzareno Trimarchi
  • uuu using u-boot-with-spl.imx   Peng Fan
    • uuu using u-boot-with-spl.imx   Michael Nazzareno Trimarchi
      • uuu using u-boot-with-spl.imx   Michael Nazzareno Trimarchi
• [PATCH 0/4] Deduplicate dhelectronics board files   Philip Oberfichtner
  • [PATCH 1/4] board: dhelectronics: Implement common mac address functions   Philip Oberfichtner
    • [PATCH 1/4] board: dhelectronics: Implement common mac address functions   Marek Vasut
  • [PATCH 2/4] ARM: imx6: DH: Use common mac address functions   Philip Oberfichtner
    • [PATCH 2/4] ARM: imx6: DH: Use common mac address functions   Marek Vasut
  • [PATCH 3/4] ARM: imx8: DH: Use common mac address functions   Philip Oberfichtner
    • [PATCH 3/4] ARM: imx8: DH: Use common mac address functions   Marek Vasut
  • [PATCH 4/4] ARM: stm32: DH: Use common mac address functions   Philip Oberfichtner
    • [PATCH 4/4] ARM: stm32: DH: Use common mac address functions   Marek Vasut
• [PATCH v3 1/3] drivers: tee: optee: remove unused probe local variable   Ilias Apalodimas
• [PATCH] drivers: xen: events: fix build issues with disabled Xen HVC   Dmytro Firsov
  • [PATCH] drivers: xen: events: fix build issues with disabled Xen HVC   Nastya Vicodin
• Adding a zynq board   Michal Simek
• [ANN] U-Boot v2022.07-rc6 released   Tom Rini
• dtboverlay to U-Boot runtime dtb   Peng Fan (OSS)
  • dtboverlay to U-Boot runtime dtb   Peter Robinson
    • dtboverlay to U-Boot runtime dtb   Heinrich Schuchardt
      • dtboverlay to U-Boot runtime dtb   Tom Rini
      • dtboverlay to U-Boot runtime dtb   Heinrich Schuchardt
• [PATCH 0/8] New boards support: db845c and qcs404-evb   Sumit Garg
  • [PATCH 1/8] arm64: dts: sdm845: Remove redundant u-boot DT properties   Sumit Garg
    • [PATCH 1/8] arm64: dts: sdm845: Remove redundant u-boot DT properties   Daniel Thompson
      • [PATCH 1/8] arm64: dts: sdm845: Remove redundant u-boot DT properties   Sumit Garg
      • [PATCH 1/8] arm64: dts: sdm845: Remove redundant u-boot DT properties   Daniel Thompson
      • [PATCH 1/8] arm64: dts: sdm845: Remove redundant u-boot DT properties   Ramon Fried
  • [PATCH 2/8] clocks: sdm845: Import qcom,gcc-sdm845.h   Sumit Garg
  • [PATCH 3/8] uart: sdm845: Fix debug UART pinmux   Sumit Garg
  • [PATCH 4/8] board: qualcomm: Add support for dragonboard845c   Sumit Garg
    • [PATCH 4/8] board: qualcomm: Add support for dragonboard845c   Daniel Thompson
      • [PATCH 4/8] board: qualcomm: Add support for dragonboard845c   Sumit Garg
  • [PATCH 5/8] mmc: msm_sdhci: Add SDCC version 5.0.0 support   Sumit Garg
  • [PATCH 6/8] pinctrl: qcom: Add pinctrl driver for QCS404 SoC   Sumit Garg
  • [PATCH 7/8] clocks: qcom: Add clock driver for QCS404 SoC   Sumit Garg
  • [PATCH 8/8] board: qualcomm: Add support for QCS404 EVB   Sumit Garg
  • [PATCH 0/8] New boards support: db845c and qcs404-evb   Peter Robinson
    • [PATCH 0/8] New boards support: db845c and qcs404-evb   Sumit Garg
• Building host tools on Windows   Martin Bonner
  • Building host tools on Windows   Bin Meng
• [PATCH v6 0/7] tpm: rng: Move TPM RNG functionality to driver model   Sughosh Ganu
  • [PATCH v6 2/7] tpm: rng: Add driver model interface for TPM RNG device   Sughosh Ganu
    • [PATCH v6 2/7] tpm: rng: Add driver model interface for TPM RNG device   Simon Glass
      • [PATCH v6 2/7] tpm: rng: Add driver model interface for TPM RNG device   Sughosh Ganu
      • [PATCH v6 2/7] tpm: rng: Add driver model interface for TPM RNG device   Simon Glass
    • [PATCH v6 2/7] tpm: rng: Add driver model interface for TPM RNG device   Ilias Apalodimas
  • [PATCH v6 3/7] tpm: Add the RNG child device   Sughosh Ganu
    • [PATCH v6 3/7] tpm: Add the RNG child device   Simon Glass
      • [PATCH v6 3/7] tpm: Add the RNG child device   Ilias Apalodimas
      • [PATCH v6 3/7] tpm: Add the RNG child device   Simon Glass
      • [PATCH v6 3/7] tpm: Add the RNG child device   Rob Herring
      • [PATCH v6 3/7] tpm: Add the RNG child device   Simon Glass
      • [PATCH v6 3/7] tpm: Add the RNG child device   Tom Rini
      • [PATCH v6 3/7] tpm: Add the RNG child device   Simon Glass
      • [PATCH v6 3/7] tpm: Add the RNG child device   Tom Rini
      • [PATCH v6 3/7] tpm: Add the RNG child device   Simon Glass
      • [PATCH v6 3/7] tpm: Add the RNG child device   Ilias Apalodimas
      • [PATCH v6 3/7] tpm: Add the RNG child device   Tom Rini
      • [PATCH v6 3/7] tpm: Add the RNG child device   Rob Herring
      • [PATCH v6 3/7] tpm: Add the RNG child device   Simon Glass
  • [PATCH v6 4/7] cmd: rng: Add support for selecting RNG device   Sughosh Ganu
  • [PATCH v6 5/7] cmd: rng: Use a statically allocated array for random bytes   Sughosh Ganu
    • [PATCH v6 5/7] cmd: rng: Use a statically allocated array for random bytes   Simon Glass
    • [PATCH v6 5/7] cmd: rng: Use a statically allocated array for random bytes   Ilias Apalodimas
  • [PATCH v6 6/7] doc: rng: Add documentation for the rng command   Sughosh Ganu
  • [PATCH v6 7/7] test: rng: Add a UT testcase for the rng command   Sughosh Ganu
    • [PATCH v6 7/7] test: rng: Add a UT testcase for the rng command   Ilias Apalodimas
  • [PATCH v6 0/7] tpm: rng: Move TPM RNG functionality to driver model   Simon Glass
• [PATCH v6 1/7] tpm: Export the TPM-version functions   Sughosh Ganu
  • [PATCH v6 1/7] tpm: Export the TPM-version functions   Ilias Apalodimas
• [PATCH] mtd: spi-nor-ids: Add support for flashes tested by xilinx   Michal Simek
• [PATCH 0/5] Add support for versal specific cadence ospi driver   Michal Simek
• [PATCH] arm64: zynqmp: Enable SLG gpo driver by default   Michal Simek
  • [PATCH] arm64: zynqmp: Enable SLG gpo driver by default   Michal Simek
• [PATCH] doc: board: amlogic: add documentation on boot flow   Neil Armstrong
  • [PATCH] doc: board: amlogic: add documentation on boot flow   Mattijs Korpershoek
  • [PATCH] doc: board: amlogic: add documentation on boot flow   Simon Glass
• [GIT PULL] please pull fsl-qoriq-2022-7-3   Peng Fan (OSS)
  • [GIT PULL] please pull fsl-qoriq-2022-7-3   Tom Rini
• [PATCH V2 01/49] spl: imx8mm: enlarge SPL_MAX_SIZE   Peng Fan
  • [PATCH V2 01/49] spl: imx8mm: enlarge SPL_MAX_SIZE   Peng Fan
    • [PATCH V2 01/49] spl: imx8mm: enlarge SPL_MAX_SIZE   Frieder Schrempf
• [PATCH 0/5] efi_loader: fix a verification process issue in secure boot   AKASHI Takahiro
  • [PATCH 1/5] lib: crypto: add mscode_parser   AKASHI Takahiro
    • [PATCH 1/5] lib: crypto: add mscode_parser   Jason A. Donenfeld
      • [PATCH 1/5] lib: crypto: add mscode_parser   AKASHI Takahiro
  • [PATCH 2/5] efi_loader: signature: export efi_hash_regions()   AKASHI Takahiro
  • [PATCH 3/5] efi_loader: image_loader: replace EFI_PRINT with log macros   AKASHI Takahiro
    • [PATCH 3/5] efi_loader: image_loader: replace EFI_PRINT with log macros   Heinrich Schuchardt
      • [PATCH 3/5] efi_loader: image_loader: replace EFI_PRINT with log macros   AKASHI Takahiro
  • [PATCH 4/5] efi_loader: image_loader: add a missing digest verification for signed PE image   AKASHI Takahiro
    • [PATCH 4/5] efi_loader: image_loader: add a missing digest verification for signed PE image   Heinrich Schuchardt
      • [PATCH 4/5] efi_loader: image_loader: add a missing digest verification for signed PE image   AKASHI Takahiro
  • [PATCH 5/5] test/py: efi_secboot: add a test for a forged signed image   AKASHI Takahiro
• [PATCH V4 00/49] imx: support i.MX93   Peng Fan (OSS)
  • [PATCH V4 01/49] spl: imx8mm: enlarge SPL_MAX_SIZE   Peng Fan (OSS)
    • [PATCH V4 01/49] spl: imx8mm: enlarge SPL_MAX_SIZE   Frieder Schrempf
      • [PATCH V4 01/49] spl: imx8mm: enlarge SPL_MAX_SIZE   Peng Fan
      • [PATCH V4 01/49] spl: imx8mm: enlarge SPL_MAX_SIZE   Frieder Schrempf
  • [PATCH V4 02/49] arm: makefile: cleanup mach-imx usage   Peng Fan (OSS)
  • [PATCH V4 03/49] imx: Change USB boot device type   Peng Fan (OSS)
  • [PATCH V4 04/49] imx: spl: Allow iMX7/8/8M to overwrite spl_board_boot_device   Peng Fan (OSS)
  • [PATCH V4 05/49] imx: simplify dependency with SPL_BOOTROM_SUPPORT   Peng Fan (OSS)
  • [PATCH V4 06/49] imx: move get_boot_device to common header   Peng Fan (OSS)
  • [PATCH V4 07/49] imx: move get_boot_device to common file   Peng Fan (OSS)
  • [PATCH V4 08/49] imx: add USB2_BOOT type   Peng Fan (OSS)
  • [PATCH V4 09/49] imx: add basic i.MX9 support   Peng Fan (OSS)
  • [PATCH V4 10/49] fsl_lpuart: add i.MX9 support   Peng Fan (OSS)
  • [PATCH V4 11/49] gpio: pca953x: support pcal6524   Peng Fan (OSS)
  • [PATCH V4 12/49] imx: pinctrl: add pinctrl and pinfunc file for i.MX93   Peng Fan (OSS)
  • [PATCH V4 13/49] imx: imx9: Add CCM and clock API support   Peng Fan (OSS)
  • [PATCH V4 14/49] mmc: fsl_esdhc_imx: Support i.MX9   Peng Fan (OSS)
  • [PATCH V4 15/49] spl: Use SPL_FIT_IMAGE_TINY for iMX9   Peng Fan (OSS)
  • [PATCH V4 16/49] imx: imx9: Add function to initialize timer   Peng Fan (OSS)
  • [PATCH V4 17/49] imx: imx9: disable watchdog   Peng Fan (OSS)
  • [PATCH V4 18/49] imx: imx9: support romapi   Peng Fan (OSS)
  • [PATCH V4 19/49] misc: imx: S400_API: Move S400 MU and API to a common place   Peng Fan (OSS)
  • [PATCH V4 20/49] misc: s4mu: Support iMX93 with Sentinel MU   Peng Fan (OSS)
  • [PATCH V4 21/49] misc: S400_API: Update release RDC API   Peng Fan (OSS)
  • [PATCH V4 22/49] misc: S400_API: New API for FW status and chip info   Peng Fan (OSS)
  • [PATCH V4 23/49] misc: s400_api: introduce ahab_release_m33_trout   Peng Fan (OSS)
  • [PATCH V4 24/49] imx: imx9: Add TRDC driver for TRDC init   Peng Fan (OSS)
  • [PATCH V4 25/49] imx: imx9: Add AHAB boot support   Peng Fan (OSS)
  • [PATCH V4 26/49] imx: imx9: Get the chip revision through S400 API   Peng Fan (OSS)
  • [PATCH V4 27/49] misc: S400_API: Rename imx8ulp_s400_msg to sentinel_msg   Peng Fan (OSS)
  • [PATCH V4 28/49] misc: imx8ulp: move fuse.c from imx8ulp to sentinel   Peng Fan (OSS)
  • [PATCH V4 29/49] misc: fuse: support to access fuse on i.MX93   Peng Fan (OSS)
  • [PATCH V4 30/49] misc: fuse: update the code for accessing fuse of i.MX93   Peng Fan (OSS)
  • [PATCH V4 31/49] imx: imx9: Add gpio registers structure   Peng Fan (OSS)
  • [PATCH V4 32/49] imx: imx9: Add MIX power init   Peng Fan (OSS)
  • [PATCH V4 33/49] imx: imx9: Add M33 release prepare function   Peng Fan (OSS)
  • [PATCH V4 34/49] imx: imx9: Support booting m33 from Acore   Peng Fan (OSS)
  • [PATCH V4 35/49] imx: imx9: Support multiple env storages at runtime   Peng Fan (OSS)
  • [PATCH V4 36/49] imx: imx9: clock: Add DDR clock support   Peng Fan (OSS)
  • [PATCH V4 37/49] ddr: imx: Add i.MX9 DDR controller driver   Peng Fan (OSS)
  • [PATCH V4 38/49] ddr: imx9: enable Performance monitor counter   Peng Fan (OSS)
  • [PATCH V4 39/49] arm: dts: Add i.MX93 SoC DTSi file   Peng Fan (OSS)
  • [PATCH V4 40/49] imx: imx93_evk: Add basic board support   Peng Fan (OSS)
  • [PATCH V4 41/49] imx: imx93_evk: Set ARM clock to 1.7Ghz   Peng Fan (OSS)
  • [PATCH V4 42/49] net: fec_mxc: support i.MX93   Peng Fan (OSS)
  • [PATCH V4 43/49] net: dwc_eth_qos: fix build break when CLK not enabled   Peng Fan (OSS)
  • [PATCH V4 44/49] net: dwc_eth_qos: public some functions   Peng Fan (OSS)
  • [PATCH V4 45/49] net: dwc_eth_qos: move i.MX code out   Peng Fan (OSS)
  • [PATCH V4 46/49] net: eqos: add function to get phy node and address   Peng Fan (OSS)
  • [PATCH V4 47/49] net: dwc_eth_qos: introduce eqos hook eqos_get_enetaddr   Peng Fan (OSS)
  • [PATCH V4 48/49] board: freescale: imx93_evk: support ethernet   Peng Fan (OSS)
  • [PATCH V4 49/49] tools: image: support i.MX93   Peng Fan (OSS)
• [Update license 1/1] drivers: clk: Update license for Intel N5X device   Simon Glass
  • [Update license 1/1] drivers: clk: Update license for Intel N5X device   Tom Rini
  • [Update license 1/1] drivers: clk: Update license for Intel N5X device   Sean Anderson
    • [Update license 1/1] drivers: clk: Update license for Intel N5X device   Tom Rini
• [PATCH] log: force DEBUG when LOG_DEBUG is activated   Simon Glass
• Please pull u-boot-dm/next   Simon Glass
  • Please pull u-boot-dm/next   Tom Rini
• [PATCH] Kconfig: Fix SYS_MALLOC_F_LEN for i.MX8MQ   Heiko Thiery
  • [PATCH] Kconfig: Fix SYS_MALLOC_F_LEN for i.MX8MQ   Tom Rini
    • [PATCH] Kconfig: Fix SYS_MALLOC_F_LEN for i.MX8MQ   Heiko Thiery
      • [PATCH] Kconfig: Fix SYS_MALLOC_F_LEN for i.MX8MQ   Tom Rini
      • [PATCH] Kconfig: Fix SYS_MALLOC_F_LEN for i.MX8MQ   Heiko Thiery
      • [PATCH] Kconfig: Fix SYS_MALLOC_F_LEN for i.MX8MQ   Peng Fan
• [PATCH 6/9] dm: core: Support accessing core tags   Tom Rini
  • [PATCH 6/9] dm: core: Support accessing core tags   Simon Glass
    • [PATCH 6/9] dm: core: Support accessing core tags   AKASHI Takahiro
      • [PATCH 6/9] dm: core: Support accessing core tags   Simon Glass
• [PATCH v1 0/6] Add Rockchip IDB device   Johan Jonker
  • [PATCH v1 0/6] Add Rockchip IDB device   Michael Nazzareno Trimarchi
• [PATCH v1 1/6] rockchip: block: add Rockchip IDB block device   Johan Jonker
  • [PATCH v1 1/6] rockchip: block: add Rockchip IDB block device   Xavier Drudis Ferran
    • [PATCH v1 1/6] rockchip: block: add Rockchip IDB block device   Johan Jonker
• [PATCH v1 2/6] rockchip: spl: allow more boot devices   Johan Jonker
• [PATCH v1 3/6] rockchip: rk3066: add Rockchip IDB block device as boot action   Johan Jonker
• [PATCH v1 4/6] arm: dts: rockchip: sync rk3066/rk3188 DT files from Linux   Johan Jonker
• [PATCH v1 5/6] arm: dts: rockchip: enable nfc node in spl for rk3066 mk808   Johan Jonker
• [PATCH v1 6/6] rockchip: configs: mk808: add idb configs   Johan Jonker
• [PATCH 1/4] ARM: dts: stm32mp15: alignment with v5.19   Patrick Delaunay
  • [PATCH 2/4] clk: stm32: add support compatible st, stm32mp1-rcc-secure   Patrick Delaunay
    • [PATCH 2/4] clk: stm32: add support compatible st,stm32mp1-rcc-secure   Patrice CHOTARD
  • [PATCH 4/4] ARM: dts: stm32: add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)   Patrick Delaunay
    • [PATCH 4/4] ARM: dts: stm32: add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)   Patrice CHOTARD
  • [PATCH 1/4] ARM: dts: stm32mp15: alignment with v5.19   Patrice CHOTARD
  • [PATCH 1/4] ARM: dts: stm32mp15: alignment with v5.19   Patrick Delaunay
• [PATCH 3/4] configs: stm32mp15: increase malloc size for pre-reloc   Patrick Delaunay
  • [PATCH 3/4] configs: stm32mp15: increase malloc size for pre-reloc   Patrice CHOTARD
• [RFC] Proposed location to host the firmware handoff specification.   Rob Herring
  • [RFC] Proposed location to host the firmware handoff specification.   Simon Glass
    • [RFC] Proposed location to host the firmware handoff specification.   Rob Herring
      • [RFC] Proposed location to host the firmware handoff specification.   Simon Glass
      • [RFC] Proposed location to host the firmware handoff specification.   Jose Marinho
      • [RFC] Proposed location to host the firmware handoff specification.   Varun Wadekar
      • [RFC] Proposed location to host the firmware handoff specification.   Jose Marinho
  • [RFC] Proposed location to host the firmware handoff specification.   Tom Rini
• [PATCH 1/3] board: freescale: p1_p2_rdb_pc: Add workaround for board reset reboot loop   Pali Rohár
  • [PATCH 1/3] board: freescale: p1_p2_rdb_pc: Add workaround for board reset reboot loop   Pali Rohár
• [PATCH 0/3] fdt: introduce "apply-all" command   Andre Przywara
  • [PATCH 1/3] cmd: fdt: move: Use map_sysmem to convert pointers   Andre Przywara
    • [PATCH 1/3] cmd: fdt: move: Use map_sysmem to convert pointers   Simon Glass
      • [PATCH 1/3] cmd: fdt: move: Use map_sysmem to convert pointers   Simon Glass
  • [PATCH 2/3] cmd: fdt: allow standalone "fdt move"   Andre Przywara
    • [PATCH 2/3] cmd: fdt: allow standalone "fdt move"   Simon Glass
      • [PATCH 2/3] cmd: fdt: allow standalone "fdt move"   Simon Glass
  • [PATCH 3/3] fdt: introduce apply_all command   Andre Przywara
    • [PATCH 3/3] fdt: introduce apply_all command   Simon Glass
      • [PATCH 3/3] fdt: introduce apply_all command   Andre Przywara
      • [PATCH 3/3] fdt: introduce apply_all command   Simon Glass
• [RFC] Data structure for information handoff between firmware boot stages   Jose Marinho
• [PATCH v11 00/13] fpga: zynqmp: Adding support of loading authenticated images   Oleksandr Suvorov
  • [PATCH v11 01/13] fpga: add option for loading FPGA secure bitstreams   Oleksandr Suvorov
    • [PATCH v11 02/13] fpga: xilinx: add missed identifier names   Oleksandr Suvorov
      • [PATCH v11 03/13] fpga: xilinx: add bitstream flags to driver desc   Oleksandr Suvorov
      • [PATCH v11 04/13] fpga: zynqmp: add str2flags call   Oleksandr Suvorov
      • [PATCH v11 05/13] fpga: add fpga_compatible2flag   Oleksandr Suvorov
      • [PATCH v11 06/13] fpga: xilinx: pass compatible flags to xilinx_load()   Oleksandr Suvorov
      • [PATCH v11 07/13] fpga: pass compatible flags to fpga_load()   Oleksandr Suvorov
      • [PATCH v11 08/13] spl: fit: pass real compatible flags to fpga_load()   Oleksandr Suvorov
      • [PATCH v11 09/13] fpga: xilinx: pass compatible flags to load() callback   Oleksandr Suvorov
      • [PATCH v11 10/13] fpga: zynqmp: optimize zynqmppl_load() code   Oleksandr Suvorov
      • [PATCH v11 11/13] fpga: zynqmp: add bitstream compatible checking   Oleksandr Suvorov
      • [PATCH v11 12/13] fpga: zynqmp: support loading authenticated images   Oleksandr Suvorov
      • [PATCH v11 13/13] fpga: zynqmp: support loading encrypted bitfiles   Oleksandr Suvorov
      • [PATCH v11 10/13] fpga: zynqmp: optimize zynqmppl_load() code   Michal Simek
      • [PATCH v11 10/13] fpga: zynqmp: optimize zynqmppl_load() code   Oleksandr Suvorov
      • [PATCH v11 10/13] fpga: zynqmp: optimize zynqmppl_load() code   Michal Simek
      • [PATCH v11 08/13] spl: fit: pass real compatible flags to fpga_load()   Michal Simek
    • [PATCH v11 01/13] fpga: add option for loading FPGA secure bitstreams   Simon Glass
      • [PATCH v11 01/13] fpga: add option for loading FPGA secure bitstreams   Michal Simek
  • [PATCH v11 00/13] fpga: zynqmp: Adding support of loading authenticated images   Michal Simek
• [PATCH v2] doc: board: amlogic: add documentation on boot flow   Neil Armstrong
  • [PATCH v2] doc: board: amlogic: add documentation on boot flow   Neil Armstrong
• Pull request efi-2022-07-rc7   Heinrich Schuchardt
  • Pull request efi-2022-07-rc7   Tom Rini
• [PATCH] spl: mmc: Use correct MMC device when loading image   Harald Seiler
  • [PATCH] spl: mmc: Use correct MMC device when loading image   Marek Vasut
  • [PATCH] spl: mmc: Use correct MMC device when loading image   Quentin Schulz
    • [PATCH] spl: mmc: Use correct MMC device when loading image   Harald Seiler
• [PATCH] console: Add option to keep it silent until env is loaded   Harald Seiler
  • [PATCH] console: Add option to keep it silent until env is loaded   Simon Glass
    • [PATCH] console: Add option to keep it silent until env is loaded   Harald Seiler
      • [PATCH] console: Add option to keep it silent until env is loaded   Simon Glass
      • [PATCH] console: Add option to keep it silent until env is loaded   Harald Seiler
      • [PATCH] console: Add option to keep it silent until env is loaded   Simon Glass
• [PATCH] efi_loader: Allow overlapped extra data for PE hashing   Su, Bao Cheng
• [PATCH v2] toradex: tdx-cfg-block: add 0068 i.mx 8m mini sku   Philippe Schenker
• [ANN] U-Boot v2022.01-rc3 released   Jesse Taube
  • [ANN] U-Boot v2022.01-rc3 released   Tom Rini
    • [ANN] U-Boot v2022.01-rc3 released   Jesse Taube
• [PATCH 01/13] Convert CONFIG_DW_ALTDESCRIPTOR to Kconfig   Tom Rini
• [PATCH 1/8] Convert CONFIG_EXTRA_CLOCK to Kconfig   Tom Rini
• [PATCH 1/4] arch/Kconfig.nxp: Re-organize slightly   Tom Rini
• [PATCH 01/17] Convert CONFIG_FSL_FIXED_MMC_LOCATION et al to Kconfig   Tom Rini
  • [PATCH 01/17] Convert CONFIG_FSL_FIXED_MMC_LOCATION et al to Kconfig   Tim Harvey
    • [PATCH 01/17] Convert CONFIG_FSL_FIXED_MMC_LOCATION et al to Kconfig   Tom Rini
      • [PATCH 01/17] Convert CONFIG_FSL_FIXED_MMC_LOCATION et al to Kconfig   Tim Harvey
      • [PATCH 01/17] Convert CONFIG_FSL_FIXED_MMC_LOCATION et al to Kconfig   Tom Rini
• [PATCH 1/2] ARM: dts: stm32mp13: add OP-TEE nodes   Patrick Delaunay
  • [PATCH 2/2] ARM: dts: stm32mp13: add SCMI nodes   Patrick Delaunay
    • [PATCH 2/2] ARM: dts: stm32mp13: add SCMI nodes   Patrice CHOTARD
  • [PATCH 1/2] ARM: dts: stm32mp13: add OP-TEE nodes   Patrice CHOTARD
  • [PATCH 1/2] ARM: dts: stm32mp13: add OP-TEE nodes   Patrick Delaunay
• [PATCH v6 00/25] Add support for MediaTek MT7621 SoC - v6   Daniel Schwierzeck
  • 回复: [PATCH v6 00/25] Add support for MediaTek MT7621 SoC - v6   Weijie Gao (高惟杰)
    • [PATCH v6 00/25] Add support for MediaTek MT7621 SoC - v6   Martin Bonner
      • [PATCH v6 00/25] Add support for MediaTek MT7621 SoC - v6   Weijie Gao
  • [PATCH v6 00/25] Add support for MediaTek MT7621 SoC - v6   Daniel Schwierzeck
• [PATCH v3 1/2] common: spl: spl_spi: add support for dynamic override of sf bus   Tom Rini
• [PATCH v3 2/2] arm: k3: j721e: add dynamic sf bus override support for j721e   Tom Rini
• [PATCH] board: ti: j721e: Return if there is an error while configuring SerDes   Tom Rini
• [PATCH 1/3] toradex: tdx-cfg-block: use only snprintf   Tom Rini
• [PATCH 2/3] toradex: tdx-cfg-block: use defines for string length   Tom Rini
• [PATCH 3/3] toradex: tdx-cfg-block: extend assembly version   Tom Rini
• [PATCH 1/5] arm: mach-k3: common: Use ddr_init in spl_enable_dcache   Tom Rini
• [PATCH 2/5] arm: dts: k3-am625-*: Mark memory with u-boot,dm-spl   Tom Rini
• [PATCH 3/5] board: ti: am62x: Use fdt functions for ram and bank init   Tom Rini
• [PATCH 4/5] board: ti: am62x: Account for DDR size fixups if ECC is enabled   Tom Rini
• [PATCH 5/5] configs: am62x_evm_r5: Add CONFIG_NR_DRAM_BANKS as done in a53 defconfig   Tom Rini
• [PATCH] firmware: ti_sci_static_data: Make file board agnostic   Tom Rini
• [PATCH 1/3] board: ti: common: Optimize boot when detecting consecutive bad records   Tom Rini
• [PATCH 2/3] board: ti: common: Handle the legacy eeprom address width properly   Tom Rini
• [PATCH 3/3] board: ti: common: board_detect: Do 1byte address checks first.   Tom Rini
• [PATCH v1] phy: nuvoton: add NPCM7xx phy control driver   Tom Rini
• [PATCH] soc: soc_ti_k3: identify j7200 SR2.0 SoCs   Tom Rini
• [PATCH v2 01/11] ARM: dts: ast2600: Add I2C pinctrl   Tom Rini
• [PATCH v2 02/11] ARM: dts: ast2600: Add I2C reset properties   Tom Rini
• [PATCH v2 03/11] ARM: dts: ast2600: Disable I2C nodes by default   Tom Rini
• [PATCH v2 04/11] ARM: dts: ast2600-evb: Remove redundant pinctrl   Tom Rini
• [PATCH v2 05/11] ARM: dts: ast2500-evb: Add I2C devices   Tom Rini
• [PATCH v2 06/11] ARM: dts: ast2600-evb: Add I2C devices   Tom Rini
• [PATCH v2 07/11] reset/aspeed: Implement status callback   Tom Rini
• [PATCH v2 08/11] i2c/aspeed: Fix reset control   Tom Rini
• [PATCH v2 09/11] i2c/aspeed: Add AST2600 compatible   Tom Rini
• [PATCH v2 10/11] config/ast2600: Enable I2C driver   Tom Rini
• [PATCH v2 11/11] config/aspeed: Enable EEPROM options   Tom Rini
• [PATCH RESEND 1/9] ARM: dts: ast2600: Update SDHCI nodes   Tom Rini
• [PATCH v2] misc: nuvoton: Add host interface configuartion driver   Tom Rini
• [PATCH v2 1/7] config/ast2600: Enable CRC32   Tom Rini
• [PATCH v2] efi_loader: PE hashing for image with gap between sections   Su, Bao Cheng
• [PATCH] stm32mp: simplify the STM32MP15x package parsing code   Patrice CHOTARD
• [PATCH] board: stm32mp1: remove test on CONFIG_DM_REGULATOR   Patrice CHOTARD
• [PATCH v2 1/3] mmc: stm32_sdmmc2: cosmetic: rename stm32_sdmmc_bind   Patrice CHOTARD
  • [PATCH v2 1/3] mmc: stm32_sdmmc2: cosmetic: rename stm32_sdmmc_bind   Patrick Delaunay
• [PATCH v2 2/3] mmc: stm32_sdmmc2: remove privdata   Patrice CHOTARD
• [PATCH v2 3/3] mmc: stm32_sdmmc2: introduce of_to_plat ops   Patrice CHOTARD
• [PATCH v2 01/10] i2c: stm32: add support for the st, stm32mp13 SOC   Patrice CHOTARD
  • [PATCH v2 01/10] i2c: stm32: add support for the st, stm32mp13 SOC   Patrick Delaunay
• [PATCH v2 02/10] rng: stm32mp1_rng: add conditional reset feature for STM32MP13x   Patrice CHOTARD
• [PATCH v2 03/10] stm32mp: add support of STM32MP13x Rev.Y   Patrice CHOTARD
• [PATCH v2 04/10] ARM: dts: stm32mp13: alignment with v5.19   Patrice CHOTARD
• [PATCH v2 05/10] ARM: dts: stm32mp13: activate led on STM32MP13F-DK   Patrice CHOTARD
• [PATCH v2 06/10] configs: stm32mp13: Add support for baudrates higher than 115200   Patrice CHOTARD
• [PATCH v2 07/10] configs: stm32mp13: activate RNG support   Patrice CHOTARD
• [PATCH v2 08/10] configs: stm32mp13: activate RTC support   Patrice CHOTARD
• [PATCH v2 09/10] configs: stm32mp13: activate I2C support   Patrice CHOTARD
• [PATCH v2 10/10] configs: stm32mp13: activate some command   Patrice CHOTARD
• [PATCH] configs: sunxi: OrangePi Zero: enable Macronix flash support   Michal Suchanek
• [PATCH] sunxi: dts: OrangePi Zero: Fixup SPI flash device node   Michal Suchanek
  • [PATCH v2] sunxi: dts: Fix SPI NOR campatible on Orange Pi Zero   Michal Suchanek
    • [PATCH v2] sunxi: dts: Fix SPI NOR campatible on Orange Pi Zero   Andre Przywara
• [PATCH v2 1/2] power: pmic: rk8xx: Support sysreset shutdown method   Michal Suchánek
  • [PATCH v2 1/2] power: pmic: rk8xx: Support sysreset shutdown method   Chris Morgan
  • [PATCH v2 1/2] power: pmic: rk8xx: Support sysreset shutdown method   Michal Suchánek
    • [PATCH v2 1/2] power: pmic: rk8xx: Support sysreset shutdown method   Michal Suchánek
• [PATCH v3 1/3] lmb: Fix lmb property's defination under struct lmb   Michal Simek
  • [PATCH v3 2/3] zynqmp: Run board_get_usable_ram_top() only on main U-Boot   Michal Simek
  • [PATCH v3 3/3] arm64: zynqmp: Disable LMB for mini configurations   Michal Simek
  • [PATCH v3 1/3] lmb: Fix lmb property's defination under struct lmb   Michal Simek
• [PATCH] arm: riscv: Remove additional ifdef from code guarded by CONFIG_IS_ENABLED   Michal Simek
  • [PATCH] arm: riscv: Remove additional ifdef from code guarded by CONFIG_IS_ENABLED   Tom Rini
  • [PATCH] arm: riscv: Remove additional ifdef from code guarded by CONFIG_IS_ENABLED   Rick Chen
  • [PATCH] arm: riscv: Remove additional ifdef from code guarded by CONFIG_IS_ENABLED   Michal Simek
• Error: cmd/libkiosk_crypto.c:5:10: fatal error: unistd.h: No such file or directory   Thu Ra
  • Error: cmd/libkiosk_crypto.c:5:10: fatal error: unistd.h: No such file or directory   Ralph Siemsen
• [PATCH] ARM: zynq: DT: Enable all FCLKs by default   Michal Simek
  • [PATCH] ARM: zynq: DT: Enable all FCLKs by default   Tom Rini
    • [PATCH] ARM: zynq: DT: Enable all FCLKs by default   Michal Simek
• [PATCH] ARM: zynq: DT: List OCM memory   Michal Simek
• [PATCH] py: tests: Bind should run only on sandbox   Michal Simek
  • [PATCH] py: tests: Bind should run only on sandbox   Simon Glass
  • [PATCH] py: tests: Bind should run only on sandbox   Michal Simek
• [PATCH] xilinx: Remove the legacy property "#stream-id-cells"   Michal Simek
• [PATCH] test/py: Run simple dm commands without checking   Michal Simek
  • [PATCH] test/py: Run simple dm commands without checking   Simon Glass
    • [PATCH] test/py: Run simple dm commands without checking   Michal Simek
  • [PATCH] test/py: Run simple dm commands without checking   Michal Simek
• [PATCH] xilinx: Remove duplicate PMIO_NODE_ID_BASE macro   Michal Simek
  • [PATCH] xilinx: Remove duplicate PMIO_NODE_ID_BASE macro   Michal Simek
• [PATCH] dt-bindings: versal: Add versal reset IDs   Michal Simek
  • [PATCH] dt-bindings: versal: Add versal reset IDs   Michal Simek
• [PATCH 0/3] sam9x60_curiosity PDA detection support   Durai Manickam KR
  • [PATCH 1/3] configs: sama9x60_curiosity: add onewire and eeprom drivers   Durai Manickam KR
  • [PATCH 2/3] board: sam9x60_curiosity: add pda detect call at init time   Durai Manickam KR
  • [PATCH 3/3] ARM: dts: at91: sam9x60_curiosity: add onewire support   Durai Manickam KR
• [PATCH] common: image-android: Add signature verification feature   qianfanguijin at 163.com
  • [PATCH] common: image-android: Add signature verification feature   Simon Glass
• [PATCH v1] common: image-android: Add signature verification feature   qianfanguijin at 163.com
• [PATCH v4 0/7] Add support for FlexSPI Boot for i.MX8m   Mamta Shukla
  • [PATCH v4 1/7] tools: mkimage: Add support to generate FlexSPI Header for i.MX8m   Mamta Shukla
    • [PATCH v4 1/7] tools: mkimage: Add support to generate FlexSPI Header for i.MX8m   Adam Ford
    • [PATCH v4 1/7] tools: mkimage: Add support to generate FlexSPI Header for i.MX8m   ZHIZHIKIN Andrey
  • [PATCH v4 2/7] dts: imx8mm-uboot: Add support to pack FlexSPI Header using binman   Mamta Shukla
  • [PATCH v4 3/7] configs: Add config for enabling FSPI boot option for i.MX8m   Mamta Shukla
    • [PATCH v4 3/7] configs: Add config for enabling FSPI boot option for i.MX8m   ZHIZHIKIN Andrey
  • [PATCH v4 4/7] board: freescale: Add QSPI Boot support in spl for i.MX8m   Mamta Shukla
  • [PATCH v4 5/7] configs: imx8mm: Define CONFIG_SYS_UBOOT_BASE for i.MX8m   Mamta Shukla
  • [PATCH v4 6/7] board: freescale: Add entry for imx8mm_evk_fspi_defconfig   Mamta Shukla
  • [PATCH v4 7/7] doc: board: nxp: Add instructions to boot from QSPI   Mamta Shukla
• [PATCH] i2c: avoid dynamic stack use in dm_i2c_write   Rasmus Villemoes
  • [PATCH] i2c: avoid dynamic stack use in dm_i2c_write   Heiko Schocher
  • [PATCH] i2c: avoid dynamic stack use in dm_i2c_write   Heiko Schocher
• [PATCH] ARM: layerscape: Use ARCH_LS104?A insead of TARGET_LS104?ARDB   Sean Anderson
  • [PATCH] ARM: layerscape: Use ARCH_LS104?A insead of TARGET_LS104?ARDB   Sean Anderson
• [PATCH v3 0/5] patman: Small fixes plus remove --no-tree from checkpatch for linux   Douglas Anderson
  • [PATCH v3 1/5] patman: Fix implicit command inserting   Douglas Anderson
    • [PATCH v3 1/5] patman: Fix implicit command inserting   Simon Glass
  • [PATCH v3 2/5] patman: Don't look at sys.argv when parsing settings   Douglas Anderson
    • [PATCH v3 2/5] patman: Don't look at sys.argv when parsing settings   Simon Glass
  • [PATCH v3 3/5] patman: Make most bool arguments BooleanOptionalAction   Douglas Anderson
    • [PATCH v3 3/5] patman: Make most bool arguments BooleanOptionalAction   Simon Glass
      • [PATCH v3 3/5] patman: Make most bool arguments BooleanOptionalAction   Doug Anderson
      • [PATCH v3 3/5] patman: Make most bool arguments BooleanOptionalAction   Simon Glass
  • [PATCH v3 4/5] patman: By default don't pass "--no-tree" to checkpatch for linux   Douglas Anderson
  • [PATCH v3 5/5] patman: Take project defaults into account for --help   Douglas Anderson
    • [PATCH v3 5/5] patman: Take project defaults into account for --help   Simon Glass
• fit_check_sig not hashing everything.   Martin Bonner
  • fit_check_sig not hashing everything.   Martin Bonner
    • fit_check_sig not hashing everything.   Simon Glass
• [gitdm PATCH 1/2] Merge branch 'master' into u-boot   Tom Rini
  • [gitdm PATCH 2/2] logparser.py: Try and be more robust with unicode handling   Tom Rini
    • [gitdm PATCH 2/2] logparser.py: Try and be more robust with unicode handling   Simon Glass
      • [gitdm PATCH 2/2] logparser.py: Try and be more robust with unicode handling   Tom Rini
  • [gitdm PATCH 1/2] Merge branch 'master' into u-boot   Simon Glass
• [PATCHv2 07/18] Convert CONFIG_USB_XHCI_EXYNOS et al to Kconfig   Tom Rini
• [PATCHv2 16/18] spl: Ensure all SPL symbols in Kconfig have some SPL dependency   Tom Rini
• [PATCH 01/20] Convert CONFIG_USB_OHCI_NEW et al to Kconfig   Tom Rini
• [PATCH 1/2] tools: relocate-rela: Remove guard around R_AARCH64_RELATIVE   Michal Simek
  • [PATCH 2/2] tools: relocate-rela: Define all macros for e_machine and reloc types   Michal Simek
    • [PATCH 2/2] tools: relocate-rela: Define all macros for e_machine and reloc types   Michal Simek
• [PATCH] phy: ti: j721e-wiz: use OF data for device specific data   Matt Ranostay
  • [PATCH] phy: ti: j721e-wiz: use OF data for device specific data   Tom Rini
• [PATCH 4/4] doc: Migrate Process wiki page to sphinx   Claudius Heine
  • [PATCH 4/4] doc: Migrate Process wiki page to sphinx   Martin Bonner
    • [PATCH 4/4] doc: Migrate Process wiki page to sphinx   Tom Rini
  • [PATCH 4/4] doc: Migrate Process wiki page to sphinx   Heinrich Schuchardt
    • [PATCH 4/4] doc: Migrate Process wiki page to sphinx   Tom Rini
    • [PATCH 4/4] doc: Migrate Process wiki page to sphinx   Tom Rini
• [PATCH 2/4] doc: Migrate DesignPrinciples wiki page to sphinx   Claudius Heine
  • [PATCH 2/4] doc: Migrate DesignPrinciples wiki page to sphinx   Heinrich Schuchardt
    • [PATCH 2/4] doc: Migrate DesignPrinciples wiki page to sphinx   Tom Rini
• [PATCH] cmd: ti: ddr3: correct minor spelling mistake in Ti DDR3   Ramin Zaghi
  • [PATCH] cmd: ti: ddr3: correct minor spelling mistake in Ti DDR3   Tom Rini
  • [PATCH] cmd: ti: ddr3: correct minor spelling mistake in Ti DDR3   Tom Rini
• CVE-2022-2347 - Unchecked Download Size and Direction in U-Boot USB DFU   Eduardo' Vela" <Nava>
• [RFC PATCH 0/3] eficonfig: add UEFI Secure Boot key maintenance interface   Ilias Apalodimas
• [RFC PATCH 1/3] eficonfig: add UEFI Secure Boot Key enrollment interface   Ilias Apalodimas
  • [RFC PATCH 1/3] eficonfig: add UEFI Secure Boot Key enrollment interface   Masahisa Kojima
    • [RFC PATCH 1/3] eficonfig: add UEFI Secure Boot Key enrollment interface   Ilias Apalodimas
  • [RFC PATCH 1/3] eficonfig: add UEFI Secure Boot Key enrollment interface   Heinrich Schuchardt
    • [RFC PATCH 1/3] eficonfig: add UEFI Secure Boot Key enrollment interface   Masahisa Kojima
• [PATCH] ti: keystone: Don't select GPIO_EXTRA_HEADER   Michal Simek
  • [PATCH] ti: keystone: Don't select GPIO_EXTRA_HEADER   Tom Rini
  • [PATCH] ti: keystone: Don't select GPIO_EXTRA_HEADER   Michal Simek
  • [PATCH] ti: keystone: Don't select GPIO_EXTRA_HEADER   Tom Rini
• [PATCH v3] usb: dwc3: Add support to reset usb ULPI phy   Michal Simek
  • [PATCH v3] usb: dwc3: Add support to reset usb ULPI phy   Marek Vasut
    • [PATCH v3] usb: dwc3: Add support to reset usb ULPI phy   Michal Simek
• [PATCH 1/2] board: ti: am335x: Enable spi0 bus on SanCloud BBE Lite   Paul Barker
  • [PATCH 2/2] board: ti: am335x: Use correct dtbs for SanCloud boards   Paul Barker
    • [PATCH 2/2] board: ti: am335x: Use correct dtbs for SanCloud boards   Tom Rini
    • [PATCH 2/2] board: ti: am335x: Use correct dtbs for SanCloud boards   Tom Rini
  • [PATCH 1/2] board: ti: am335x: Enable spi0 bus on SanCloud BBE Lite   Tom Rini
  • [PATCH 1/2] board: ti: am335x: Enable spi0 bus on SanCloud BBE Lite   Tom Rini
  • [PATCH 1/2] board: ti: am335x: Enable spi0 bus on SanCloud BBE Lite   Tom Rini
• [RFC PATCH 0/2] Support UEFI SPI I/O protocol   Paul Barker
  • [RFC PATCH 1/2] efi_loader: Add SPI I/O protocol support   Paul Barker
    • [RFC PATCH 1/2] efi_loader: Add SPI I/O protocol support   Tom Rini
    • [RFC PATCH 1/2] efi_loader: Add SPI I/O protocol support   Ilias Apalodimas
      • [RFC PATCH 1/2] efi_loader: Add SPI I/O protocol support   Paul Barker
  • [RFC PATCH 2/2] arm: dts: am335x-sancloud-bbe-lite: UEFI SPI export   Paul Barker
  • [RFC PATCH 0/2] Support UEFI SPI I/O protocol   Heinrich Schuchardt
    • [RFC PATCH 0/2] Support UEFI SPI I/O protocol   Paul Barker
• [PATCH] mmc: atmel_sdhci: re-enable sdhci after SD Card re-insertion   Eugen.Hristev at microchip.com
• [PATCH v2 0/9] New boards support: db845c and qcs404-evb   Sumit Garg
  • [PATCH v2 1/9] board: starqltechn: Align DT node overrides with sdm845.dtsi   Sumit Garg
    • [PATCH v2 1/9] board: starqltechn: Align DT node overrides with sdm845.dtsi   Ramon Fried
  • [PATCH v2 2/9] arm64: dts: sdm845: Remove redundant u-boot DT properties   Sumit Garg
    • [PATCH v2 2/9] arm64: dts: sdm845: Remove redundant u-boot DT properties   Ramon Fried
  • [PATCH v2 3/9] clocks: sdm845: Import qcom,gcc-sdm845.h   Sumit Garg
    • [PATCH v2 3/9] clocks: sdm845: Import qcom,gcc-sdm845.h   Ramon Fried
  • [PATCH v2 4/9] uart: sdm845: Fix debug UART pinmux   Sumit Garg
    • [PATCH v2 4/9] uart: sdm845: Fix debug UART pinmux   Ramon Fried
  • [PATCH v2 5/9] board: qualcomm: Add support for dragonboard845c   Sumit Garg
    • [PATCH v2 5/9] board: qualcomm: Add support for dragonboard845c   Ramon Fried
  • [PATCH v2 6/9] mmc: msm_sdhci: Add SDCC version 5.0.0 support   Sumit Garg
    • [PATCH v2 6/9] mmc: msm_sdhci: Add SDCC version 5.0.0 support   Ramon Fried
  • [PATCH v2 7/9] pinctrl: qcom: Add pinctrl driver for QCS404 SoC   Sumit Garg
    • [PATCH v2 7/9] pinctrl: qcom: Add pinctrl driver for QCS404 SoC   Ramon Fried
  • [PATCH v2 8/9] clocks: qcom: Add clock driver for QCS404 SoC   Sumit Garg
    • [PATCH v2 8/9] clocks: qcom: Add clock driver for QCS404 SoC   Ramon Fried
      • [PATCH v2 8/9] clocks: qcom: Add clock driver for QCS404 SoC   Sumit Garg
  • [PATCH v2 9/9] board: qualcomm: Add support for QCS404 EVB   Sumit Garg
  • [PATCH v2 0/9] New boards support: db845c and qcs404-evb   Peng Fan
    • [PATCH v2 0/9] New boards support: db845c and qcs404-evb   Sumit Garg
      • [PATCH v2 0/9] New boards support: db845c and qcs404-evb   Peng Fan
      • [PATCH v2 0/9] New boards support: db845c and qcs404-evb   Sumit Garg
• [PATCH] bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2 boards   Michael Trimarchi
  • [PATCH] bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2 boards   Michael Trimarchi
    • [PATCH] bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2 boards   Stefano Babic
      • [PATCH] bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2 boards   Michael Nazzareno Trimarchi
• [PATCH 1/2] mtd: nand: Fix ecc in mxs_nand_spl onfi mode   Michael Trimarchi
  • [PATCH 2/2] mtd: nand: mxs_nand_spl Fix loop exit condition   Michael Trimarchi
• [PATCH v4 2/3] drivers: tee: optee: discover OP-TEE services   Tom Rini
  • [PATCH v4 2/3] drivers: tee: optee: discover OP-TEE services   Etienne Carriere
• [PULL] u-boot-mips for u-boot/next (v2022.10)   Daniel Schwierzeck
  • [PULL] u-boot-mips for u-boot/next (v2022.10)   Tom Rini
    • [PULL] u-boot-mips for u-boot/next (v2022.10)   Daniel Schwierzeck
      • [PULL] u-boot-mips for u-boot/next (v2022.10)   Tom Rini
      • [PULL] u-boot-mips for u-boot/next (v2022.10)   Daniel Schwierzeck
      • [PULL] u-boot-mips for u-boot/next (v2022.10)   Weijie Gao
      • [PULL] u-boot-mips for u-boot/next (v2022.10)   Weijie Gao
• [PATCH v2] Add SCSI scan for ENV in EXT4 or FAT   Tom Rini
• [PATCH v2] ubifs: Fix reference count leak in ubifsumount   Tom Rini
• [PATCH 1/1] test: fix CONFIG_ACPIGEN dependencies   Tom Rini
• [PATCH 1/1] snd: enable building max98357a driver with ACPIGEN=n   Tom Rini
• [PATCH 1/1] sound: enable building DA7219 driver with ACPIGEN=n   Tom Rini
• [PATCH 1/1] Makefile: respect CONFIG_CC_OPTIMIZE_FOR_DEBUG for host tools   Tom Rini
• [PATCH] fw_env: add fallback to Linux's NVMEM based access   Tom Rini
• [PATCH v2] mtd: rawnand: Add support to dedicated function to set timings   Tom Rini
• [PATCH v2] led: pwm: Use NOP uclass driver for top-level node   Tom Rini
• [PATCH] regmap: fix some comments   Tom Rini
• [PATCH] board_init: Do not reserve MALLOC_F area on stack if non-zero MALLOC_F_ADDR   Tom Rini
  • [PATCH] board_init: Do not reserve MALLOC_F area on stack if non-zero MALLOC_F_ADDR   Marek Vasut
• [PATCH] imx8mq_phanbell: Remove custom CONFIG_SYS_MALLOC_F_LEN   Fabio Estevam
  • [PATCH] imx8mq_phanbell: Remove custom CONFIG_SYS_MALLOC_F_LEN   Tom Rini
• [PATCH v17 0/2] add TCP and HTTP for downloading images   Ying-Chun Liu (PaulLiu)
  • [PATCH v17 1/2] net: Add TCP protocol   Ying-Chun Liu (PaulLiu)
    • [PATCH v17 1/2] net: Add TCP protocol   Simon Glass
  • [PATCH v17 2/2] net: Add wget application   Ying-Chun Liu (PaulLiu)
    • [PATCH v17 2/2] net: Add wget application   Simon Glass
• [PATCH 1/2] designprinciples.rst: Perform minor cleanups   Tom Rini
  • [PATCH 2/2] process.rst: Perform minor cleanups   Tom Rini
    • [PATCH 2/2] process.rst: Perform minor cleanups   Claudius Heine
      • [PATCH 2/2] process.rst: Perform minor cleanups   Tom Rini
  • [PATCH 1/2] designprinciples.rst: Perform minor cleanups   Claudius Heine
• [PATCH] mtd: spi-nor-ids: add winbond w25q512nw family support   Jae Hyun Yoo
  • [PATCH] mtd: spi-nor-ids: add winbond w25q512nw family support   Jagan Teki
    • [PATCH] mtd: spi-nor-ids: add winbond w25q512nw family support   Jae Hyun Yoo
      • [PATCH] mtd: spi-nor-ids: add winbond w25q512nw family support   Jagan Teki
• [PATCH v2] mtd: spi-nor-ids: add winbond w25q512nw family support   Jae Hyun Yoo
  • [PATCH v2] mtd: spi-nor-ids: add winbond w25q512nw family support   Cédric Le Goater
• [PATCH] requirements: Move to atomicwrites==1.4.1   Tom Rini
  • [PATCH] requirements: Move to atomicwrites==1.4.1   Tom Rini
• [PATCH] cmd: fdt: Add support for reading stringlist property values   Marek Vasut
  • [PATCH] cmd: fdt: Add support for reading stringlist property values   Simon Glass
    • [PATCH] cmd: fdt: Add support for reading stringlist property values   Marek Vasut
      • [PATCH] cmd: fdt: Add support for reading stringlist property values   Simon Glass
      • [PATCH] cmd: fdt: Add support for reading stringlist property values   Marek Vasut
      • [PATCH] cmd: fdt: Add support for reading stringlist property values   Simon Glass
      • [PATCH] cmd: fdt: Add support for reading stringlist property values   Simon Glass
• [PATCH] board_init: Convert CONFIG_MALLOC_F_ADDR to Kconfig   Marek Vasut
  • [PATCH] board_init: Convert CONFIG_MALLOC_F_ADDR to Kconfig   Simon Glass
• [TF-A] [RFC] Proposed location to host the firmware handoff specification.   Julius Werner
  • [TF-A] [RFC] Proposed location to host the firmware handoff specification.   Jose Marinho
    • [TF-A] [RFC] Proposed location to host the firmware handoff specification.   Julius Werner
• [PATCH 1/4] doc: Migrate CodingStyle wiki page to sphinx   Heinrich Schuchardt
  • [PATCH 1/4] doc: Migrate CodingStyle wiki page to sphinx   Heinrich Schuchardt
  • [PATCH 1/4] doc: Migrate CodingStyle wiki page to sphinx   Tom Rini
  • [PATCH 1/4] doc: Migrate CodingStyle wiki page to sphinx   Tom Rini
• [PATCH 3/4] doc: codingstyle: Remove comment about '//' style comments   Heinrich Schuchardt
• [PATCH 1/6] Convert CONFIG_SYS_CACHE_STASHING to Kconfig   Tom Rini
• [PATCH v2 00/11] Add Rockchip IDB device   Johan Jonker
• [PATCH v2 01/11] rockchip: idb: prepare IDB block device   Johan Jonker
• [PATCH v2 02/11] rockchip: idb: add basic functions   Johan Jonker
• [PATCH v2 03/11] rockchip: idb: add IDB block device   Johan Jonker
• [PATCH v2 04/11] rockchip: idb: add info and stop command   Johan Jonker
• [PATCH v2 05/11] rockchip: idb: add sector1 info   Johan Jonker
• [PATCH v2 06/11] rockchip: idb: add randomizer option   Johan Jonker
• [PATCH v2 07/11] rockchip: spl: allow more boot devices   Johan Jonker
• [PATCH v2 08/11] rockchip: rk3066: add Rockchip IDB block device as boot action   Johan Jonker
• [PATCH v2 09/11] arm: dts: rockchip: sync rk3066/rk3188 DT files from Linux   Johan Jonker
• [PATCH v2 10/11] arm: dts: rockchip: enable nfc node in spl for rk3066 mk808   Johan Jonker
• [PATCH v2 11/11] rockchip: configs: mk808: add idb configs   Johan Jonker
• [PATCH] mtd: spi-nor-core: Implement spi_nor_read_sfdp_dma_unsafe() for sfdp parse   Jagan Teki
• [PATCH v1] arm: relocate: Replace ADR instruction with non-pseudo-instruction   Jesse Taube
  • [PATCH v1] arm: relocate: Replace ADR instruction with non-pseudo-instruction   Tom Rini
  • [PATCH v1] arm: relocate: Replace ADR instruction with non-pseudo-instruction   Andre Przywara
    • [PATCH v1] arm: relocate: Replace ADR instruction with non-pseudo-instruction   Tom Rini
    • [PATCH v1] arm: relocate: Replace ADR instruction with non-pseudo-instruction   Andre Przywara
      • [PATCH v1] arm: relocate: Replace ADR instruction with non-pseudo-instruction   Andre Przywara
      • [PATCH v1] arm: relocate: Replace ADR instruction with non-pseudo-instruction   Jesse Taube
    • [PATCH v1] arm: relocate: Replace ADR instruction with non-pseudo-instruction   Jesse Taube
• [PATCH v8 2/9] eficonfig: menu-driven addition of UEFI boot option   Heinrich Schuchardt
  • [PATCH v8 2/9] eficonfig: menu-driven addition of UEFI boot option   Takahiro Akashi
    • [PATCH v8 2/9] eficonfig: menu-driven addition of UEFI boot option   Heinrich Schuchardt
  • [PATCH v8 2/9] eficonfig: menu-driven addition of UEFI boot option   Masahisa Kojima
    • [PATCH v8 2/9] eficonfig: menu-driven addition of UEFI boot option   Masahisa Kojima
  • [PATCH v8 2/9] eficonfig: menu-driven addition of UEFI boot option   Takahiro Akashi
• [PATCH v8 3/9] eficonfig: add "Edit Boot Option" menu entry   Heinrich Schuchardt
  • [PATCH v8 3/9] eficonfig: add "Edit Boot Option" menu entry   Masahisa Kojima
• [PATCH v8 4/9] menu: add KEY_PLUS and KEY_MINUS handling   Heinrich Schuchardt
• [PATCH v8 1/9] efi_loader: expose END device path node   Heinrich Schuchardt
  • [PATCH v8 1/9] efi_loader: expose END device path node   Ilias Apalodimas
• [RFC PATCH 3/3] eficonfig: add "Delete Key" menu entry   Heinrich Schuchardt
  • [RFC PATCH 3/3] eficonfig: add "Delete Key" menu entry   Takahiro Akashi
  • [RFC PATCH 3/3] eficonfig: add "Delete Key" menu entry   Masahisa Kojima
    • [RFC PATCH 3/3] eficonfig: add "Delete Key" menu entry   Heinrich Schuchardt
      • [RFC PATCH 3/3] eficonfig: add "Delete Key" menu entry   Masahisa Kojima
• [PATCH] mmc: fsl_esdhc: Fix 'Internal clock never stabilised.' error   Pali Rohár
• [PATCH 1/3] doc: environment: Drop u-boot_addr_r   Heinrich Schuchardt
  • [PATCH 1/3] doc: environment: Drop u-boot_addr_r   Tom Rini
    • [PATCH 2/3] doc: environment: Expand on fdt_addr, initrd_addr and loadaddr   Tom Rini
    • [PATCH 3/3] doc: environment: Further expand on Image locations and provide example   Tom Rini
• [PATCH 2/3] doc: environment: Expand on fdt_addr, initrd_addr and loadaddr   Heinrich Schuchardt
  • [PATCH 2/3] doc: environment: Expand on fdt_addr, initrd_addr and loadaddr   Tom Rini
• [PATCH 1/2] ubifs: Fix ubifs_assert_cmt_locked()   Pali Rohár
  • [PATCH 2/2] ubifs: Use U-Boot assert() from <log.h> in UBI/UBIFS code   Pali Rohár
    • [PATCH 2/2] ubifs: Use U-Boot assert() from <log.h> in UBI/UBIFS code   Heiko Schocher
  • [PATCH 1/2] ubifs: Fix ubifs_assert_cmt_locked()   Heiko Schocher
• [PATCH 1/2] Fix usage of CONFIG_PREBOOT   Pali Rohár
  • [PATCH 2/2] Nokia RX-51: Remove CONFIG_PREBOOT from defconfig   Pali Rohár
    • [PATCH 2/2] Nokia RX-51: Remove CONFIG_PREBOOT from defconfig   Tom Rini
      • [PATCH 2/2] Nokia RX-51: Remove CONFIG_PREBOOT from defconfig   Pali Rohár
      • [PATCH 2/2] Nokia RX-51: Remove CONFIG_PREBOOT from defconfig   Tom Rini
      • [PATCH 2/2] Nokia RX-51: Remove CONFIG_PREBOOT from defconfig   Pali Rohár
      • [PATCH 2/2] Nokia RX-51: Remove CONFIG_PREBOOT from defconfig   Tom Rini
      • [PATCH 2/2] Nokia RX-51: Remove CONFIG_PREBOOT from defconfig   Pali Rohár
      • [PATCH 2/2] Nokia RX-51: Remove CONFIG_PREBOOT from defconfig   Tom Rini
      • [PATCH 2/2] Nokia RX-51: Remove CONFIG_PREBOOT from defconfig   Pali Rohár
    • [PATCH 2/2] Nokia RX-51: Remove CONFIG_PREBOOT from defconfig   Tom Rini
      • [PATCH 2/2] Nokia RX-51: Remove CONFIG_PREBOOT from defconfig   Pali Rohár
      • [PATCH 2/2] Nokia RX-51: Remove CONFIG_PREBOOT from defconfig   Tom Rini
      • [PATCH 2/2] Nokia RX-51: Remove CONFIG_PREBOOT from defconfig   Pali Rohár
      • [PATCH 2/2] Nokia RX-51: Remove CONFIG_PREBOOT from defconfig   Tom Rini
      • [PATCH 2/2] Nokia RX-51: Remove CONFIG_PREBOOT from defconfig   Pali Rohár
      • [PATCH 2/2] Nokia RX-51: Remove CONFIG_PREBOOT from defconfig   Tom Rini
  • [PATCH 1/2] Fix usage of CONFIG_PREBOOT   Simon Glass
    • [PATCH 1/2] Fix usage of CONFIG_PREBOOT   Pali Rohár
• [PATCH 3/3] doc: environment: Further expand on Image locations and provide example   Heinrich Schuchardt
  • [PATCH 3/3] doc: environment: Further expand on Image locations and provide example   Tom Rini
    • [PATCH 3/3] doc: environment: Further expand on Image locations and provide example   Heinrich Schuchardt
      • [PATCH 3/3] doc: environment: Further expand on Image locations and provide example   Tom Rini
      • [PATCH 3/3] doc: environment: Further expand on Image locations and provide example   Heinrich Schuchardt
      • [PATCH 3/3] doc: environment: Further expand on Image locations and provide example   Tom Rini
• [PATCH 1/1] dm: avoid NULL dereference in add_item()   Heinrich Schuchardt
  • [PATCH 1/1] dm: avoid NULL dereference in add_item()   Simon Glass
    • [PATCH 1/1] dm: avoid NULL dereference in add_item()   Simon Glass
• [PATCH 1/1] efi_loader: memory leak in efi_set_bootdev()   Heinrich Schuchardt
• [PATCH 0/4] Convert CONFIG_SYS_MIPS_TIMER_FREQ to Kconfig   Daniel Schwierzeck
  • [PATCH 1/4] MIPS: remove deprecated TARGET_VCT option   Daniel Schwierzeck
    • [PATCH 1/4] MIPS: remove deprecated TARGET_VCT option   Stefan Roese
  • [PATCH 2/4] MIPS: remove CONFIG_SYS_MHZ   Daniel Schwierzeck
    • [PATCH 2/4] MIPS: remove CONFIG_SYS_MHZ   Stefan Roese
  • [PATCH 3/4] MIPS: mscc: remove unused CPU_CLOCK_RATE   Daniel Schwierzeck
    • [PATCH 3/4] MIPS: mscc: remove unused CPU_CLOCK_RATE   Stefan Roese
  • [PATCH 4/4] MIPS: convert CONFIG_SYS_MIPS_TIMER_FREQ to Kconfig   Daniel Schwierzeck
    • [PATCH 4/4] MIPS: convert CONFIG_SYS_MIPS_TIMER_FREQ to Kconfig   Stefan Roese
• [PATCH 1/1] configs: sandbox_defconfig: CONFIG_LOG_MAX_LEVEL=9   Heinrich Schuchardt
  • [PATCH 1/1] configs: sandbox_defconfig: CONFIG_LOG_MAX_LEVEL=9   Heinrich Schuchardt
• [PATCH sunxi/next] spi: sunxi: use XCH status to detect in-progress transfer   Andre Przywara
  • [PATCH sunxi/next] spi: sunxi: use XCH status to detect in-progress transfer   Icenowy Zheng
  • [PATCH sunxi/next] spi: sunxi: use XCH status to detect in-progress transfer   Andre Przywara
• [PATCH v4] i2c: nuvoton: Add NPCM7xx i2c driver   Heiko Schocher
  • [PATCH v4] i2c: nuvoton: Add NPCM7xx i2c driver   Heiko Schocher
• [PATCH 0/4] test: uncover NULL dereferences in logging   Heinrich Schuchardt
  • [PATCH 1/4] dm: avoid NULL dereference in add_item()   Heinrich Schuchardt
  • [PATCH 2/4] test: fix log tests   Heinrich Schuchardt
    • [PATCH 2/4] test: fix log tests   Simon Glass
      • [PATCH 2/4] test: fix log tests   Simon Glass
  • [PATCH 3/4] dm: avoid NULL dereference in lists_bind_fdt()   Heinrich Schuchardt
    • [PATCH 3/4] dm: avoid NULL dereference in lists_bind_fdt()   Simon Glass
      • [PATCH 3/4] dm: avoid NULL dereference in lists_bind_fdt()   Simon Glass
  • [PATCH 4/4] configs: sandbox_defconfig: CONFIG_LOG_MAX_LEVEL=9   Heinrich Schuchardt
    • [PATCH 4/4] configs: sandbox_defconfig: CONFIG_LOG_MAX_LEVEL=9   Simon Glass
      • [PATCH 4/4] configs: sandbox_defconfig: CONFIG_LOG_MAX_LEVEL=9   Simon Glass
• [PATCH 1/1] dm: fix logic of lists_bind_fdt()   Heinrich Schuchardt
  • [PATCH 1/1] dm: fix logic of lists_bind_fdt()   Simon Glass
    • [PATCH 1/1] dm: fix logic of lists_bind_fdt()   Heinrich Schuchardt
      • [PATCH 1/1] dm: fix logic of lists_bind_fdt()   Simon Glass
• [PATCH V4 resend] spl: imx8mm: enlarge SPL_MAX_SIZE   Peng Fan (OSS)
  • [PATCH V4 resend] spl: imx8mm: enlarge SPL_MAX_SIZE   Fabio Estevam
• [PATCH] misc: Port USB251xB/xBi Hi-Speed Hub Controller Driver from Linux   Stefan Herbrechtsmeier
• [PATCH 1/2] dm: core: Add functions to read 8/16-bit integers   Marek Vasut
  • [PATCH 1/2] dm: core: Add functions to read 8/16-bit integers   Simon Glass
    • [PATCH 1/2] dm: core: Add functions to read 8/16-bit integers   Stefan Herbrechtsmeier
      • [PATCH 1/2] dm: core: Add functions to read 8/16-bit integers   Simon Glass
      • [PATCH 1/2] dm: core: Add functions to read 8/16-bit integers   Stefan Herbrechtsmeier
      • [PATCH 1/2] dm: core: Add functions to read 8/16-bit integers   Simon Glass
      • [PATCH 1/2] dm: core: Add functions to read 8/16-bit integers   Stefan Herbrechtsmeier
      • [PATCH 1/2] dm: core: Add functions to read 8/16-bit integers   Heinrich Schuchardt
      • [PATCH 1/2] dm: core: Add functions to read 8/16-bit integers   Simon Glass
• [PATCH 2/2] misc: usb251xb: Support 8/16 bit device tree values   Marek Vasut
• [PATCH v2] spl: mmc: Use correct MMC device when loading image   Harald Seiler
• [ANN] U-Boot v2022.07 released   Tom Rini
  • [ANN] U-Boot v2022.07 released   Simon Glass
• [PATCH] rockchip: rk3399: boot_devices: fix eMMC node name   Quentin Schulz
  • [PATCH] rockchip: rk3399: boot_devices: fix eMMC node name   Quentin Schulz
    • [PATCH] rockchip: rk3399: boot_devices: fix eMMC node name   Xavier Drudis Ferran
      • [PATCH] rockchip: rk3399: boot_devices: fix eMMC node name   Art Nikpal
      • [PATCH] rockchip: rk3399: boot_devices: fix eMMC node name   Quentin Schulz
      • [PATCH] rockchip: rk3399: boot_devices: fix eMMC node name   Quentin Schulz
      • [PATCH] rockchip: rk3399: boot_devices: fix eMMC node name   Quentin Schulz
      • [PATCH] rockchip: rk3399: boot_devices: fix eMMC node name   Art Nikpal
  • [PATCH] rockchip: rk3399: boot_devices: fix eMMC node name   Jagan Teki
    • [PATCH] rockchip: rk3399: boot_devices: fix eMMC node name   Jagan Teki
      • [PATCH] rockchip: rk3399: boot_devices: fix eMMC node name   Tom Rini
• [RESEND PATCH v3 0/1] Support SPL for i.MX7ULP   Oleksandr Suvorov
  • [RESEND PATCH v3 1/1] mx7ulp: add base SPL support for mx7ulp   Oleksandr Suvorov
• [PATCH 1/2] dt-bindings: mtd: partitions: add binding for U-Boot bootloader   Rafał Miłecki
  • [PATCH 2/2] mtd: parsers: add Broadcom's U-Boot parser   Rafał Miłecki
  • [PATCH 1/2] dt-bindings: mtd: partitions: add binding for U-Boot bootloader   Rob Herring
• imx8m read boot ROM log issue   Belisko Marek
• U-Boot SPI DM framework issues   Andre Przywara
  • U-Boot SPI DM framework issues   Simon Glass
• [PATCH 1/7] doc: Migrate CodingStyle wiki page to Sphinx   Tom Rini
  • [PATCH 2/7] doc: Migrate DesignPrinciples wiki page to Sphinx   Tom Rini
    • [PATCH 2/7] doc: Migrate DesignPrinciples wiki page to Sphinx   Heinrich Schuchardt
      • [PATCH 2/7] doc: Migrate DesignPrinciples wiki page to Sphinx   Tom Rini
  • [PATCH 3/7] doc: codingstyle: Remove comment about '//' style comments   Tom Rini
  • [PATCH 4/7] doc: Migrate Process wiki page to Sphinx   Tom Rini
    • [PATCH 4/7] doc: Migrate Process wiki page to Sphinx   Heinrich Schuchardt
      • [PATCH 4/7] doc: Migrate Process wiki page to Sphinx   Tom Rini
  • [PATCH 5/7] designprinciples.rst: Perform minor cleanups   Tom Rini
    • [PATCH 5/7] designprinciples.rst: Perform minor cleanups   Heinrich Schuchardt
      • [PATCH 5/7] designprinciples.rst: Perform minor cleanups   Tom Rini
  • [PATCH 6/7] process.rst: Perform minor cleanups   Tom Rini
    • [PATCH 6/7] process.rst: Perform minor cleanups   Heinrich Schuchardt
      • [PATCH 6/7] process.rst: Perform minor cleanups   Tom Rini
  • [PATCH 7/7] process.rst: Modernize the "Workflow of a Custodian" section   Tom Rini
    • [PATCH 7/7] process.rst: Modernize the "Workflow of a Custodian" section   Heinrich Schuchardt
      • [PATCH 7/7] process.rst: Modernize the "Workflow of a Custodian" section   Tom Rini
  • [PATCH 1/7] doc: Migrate CodingStyle wiki page to Sphinx   Martin Bonner
    • [PATCH 1/7] doc: Migrate CodingStyle wiki page to Sphinx   Tom Rini
  • [PATCH 1/7] doc: Migrate CodingStyle wiki page to Sphinx   Heinrich Schuchardt
    • [PATCH 1/7] doc: Migrate CodingStyle wiki page to Sphinx   Tom Rini
    • [PATCH 1/7] doc: Migrate CodingStyle wiki page to Sphinx   Tom Rini
• [PATCH 1/1] net: phy: possible NULL dereference in fixed_phy_create()   Heinrich Schuchardt
  • [PATCH 1/1] net: phy: possible NULL dereference in fixed_phy_create()   Marek Behún
• [PATCH] configs: stm32m15: support STM32MP_BOARD_EXTRA_ENV for st boards   Patrick Delaunay
  • [PATCH] configs: stm32m15: support STM32MP_BOARD_EXTRA_ENV for st boards   Patrick Delaunay
• [PATCH 1/1] cmd: undefined return value of do_extension_apply()   Heinrich Schuchardt
  • [PATCH 1/1] cmd: undefined return value of do_extension_apply()   Köry Maincent
• [PATCH 00/19] buildman: Integration of boards.cfg file   Simon Glass
  • [PATCH 01/19] buildman: Drop -I option   Simon Glass
  • [PATCH 02/19] buildman: Support running from an IDE   Simon Glass
  • [PATCH 03/19] buildman: Avoid using board as a variable   Simon Glass
  • [PATCH 04/19] buildman: Fix use of 'boards' in func_test   Simon Glass
  • [PATCH 05/19] buildman: Fix use of 'boards' in test   Simon Glass
  • [PATCH 06/19] buildman: Drop use of 'boards' in control   Simon Glass
  • [PATCH 07/19] buildman: Drop use of 'board' in board module   Simon Glass
  • [PATCH 08/19] buildman: Convert camel case in board.py   Simon Glass
  • [PATCH 09/19] buildman: Split out Boards into its own file   Simon Glass
  • [PATCH 10/19] buildman: Incorporate the genboardscfg.py tool   Simon Glass
    • [PATCH 10/19] buildman: Incorporate the genboardscfg.py tool   Tom Rini
      • [PATCH 10/19] buildman: Incorporate the genboardscfg.py tool   Simon Glass
      • [PATCH 10/19] buildman: Incorporate the genboardscfg.py tool   Tom Rini
      • [PATCH 10/19] buildman: Incorporate the genboardscfg.py tool   Simon Glass
      • [PATCH 10/19] buildman: Incorporate the genboardscfg.py tool   Tom Rini
      • [PATCH 10/19] buildman: Incorporate the genboardscfg.py tool   Simon Glass
      • [PATCH 10/19] buildman: Incorporate the genboardscfg.py tool   Tom Rini
      • [PATCH 10/19] buildman: Incorporate the genboardscfg.py tool   Simon Glass
  • [PATCH 11/19] buildman: Tidy up pylint problems in boards module   Simon Glass
  • [PATCH 12/19] buildman: Replace the Options column with config name   Simon Glass
  • [PATCH 13/19] Revert "Revert "global: Remove CONFIG_SYS_EXTRA_OPTIONS support""   Simon Glass
    • [PATCH 13/19] Revert "Revert "global: Remove CONFIG_SYS_EXTRA_OPTIONS support""   Tom Rini
  • [PATCH 14/19] buildman: Return an error if there are maintainer warnings   Simon Glass
  • [PATCH 15/19] gitlab/azure: Use buildman instead of genboardscfg   Simon Glass
    • [PATCH 15/19] gitlab/azure: Use buildman instead of genboardscfg   Tom Rini
  • [PATCH 16/19] Drop genboardscfg.py   Simon Glass
  • [PATCH 17/19] buildman: Allow lines without a symbol   Simon Glass
  • [PATCH 18/19] buildman: Drop a Python 2.7 comment   Simon Glass
  • [PATCH 19/19] buildman: Drop a TODO that is done   Simon Glass
• [PATCH v3 0/9] New boards support: db845c and qcs404-evb   Sumit Garg
  • [PATCH v3 1/9] board: starqltechn: Align DT node overrides with sdm845.dtsi   Sumit Garg
    • [PATCH v3 1/9] board: starqltechn: Align DT node overrides with sdm845.dtsi   Tom Rini
  • [PATCH v3 2/9] arm64: dts: sdm845: Remove redundant u-boot DT properties   Sumit Garg
    • [PATCH v3 2/9] arm64: dts: sdm845: Remove redundant u-boot DT properties   Tom Rini
  • [PATCH v3 3/9] clocks: sdm845: Import qcom,gcc-sdm845.h   Sumit Garg
    • [PATCH v3 3/9] clocks: sdm845: Import qcom,gcc-sdm845.h   Tom Rini
  • [PATCH v3 4/9] uart: sdm845: Fix debug UART pinmux   Sumit Garg
    • [PATCH v3 4/9] uart: sdm845: Fix debug UART pinmux   Tom Rini
  • [PATCH v3 5/9] board: qualcomm: Add support for dragonboard845c   Sumit Garg
    • [PATCH v3 5/9] board: qualcomm: Add support for dragonboard845c   Tom Rini
  • [PATCH v3 6/9] mmc: msm_sdhci: Add SDCC version 5.0.0 support   Sumit Garg
    • [PATCH v3 6/9] mmc: msm_sdhci: Add SDCC version 5.0.0 support   Tom Rini
  • [PATCH v3 7/9] pinctrl: qcom: Add pinctrl driver for QCS404 SoC   Sumit Garg
    • [PATCH v3 7/9] pinctrl: qcom: Add pinctrl driver for QCS404 SoC   Tom Rini
  • [PATCH v3 8/9] clocks: qcom: Add clock driver for QCS404 SoC   Sumit Garg
    • [PATCH v3 8/9] clocks: qcom: Add clock driver for QCS404 SoC   Tom Rini
  • [PATCH v3 9/9] board: qualcomm: Add support for QCS404 EVB   Sumit Garg
    • [PATCH v3 9/9] board: qualcomm: Add support for QCS404 EVB   Stephan Gerhold
      • [PATCH v3 9/9] board: qualcomm: Add support for QCS404 EVB   Sumit Garg
      • [PATCH v3 9/9] board: qualcomm: Add support for QCS404 EVB   Stephan Gerhold
      • [PATCH v3 9/9] board: qualcomm: Add support for QCS404 EVB   Sumit Garg
    • [PATCH v3 9/9] board: qualcomm: Add support for QCS404 EVB   Tom Rini
  • [PATCH v3 0/9] New boards support: db845c and qcs404-evb   Sumit Garg
    • [PATCH v3 0/9] New boards support: db845c and qcs404-evb   Tom Rini
      • [PATCH v3 0/9] New boards support: db845c and qcs404-evb   Sumit Garg
• [PATCH v2] log: force DEBUG when LOG_DEBUG is activated   Patrick Delaunay
  • [PATCH v2] log: force DEBUG when LOG_DEBUG is activated   Simon Glass
• u-boot and IPv6   Chris Packham
  • u-boot and IPv6   Chris Packham
  • u-boot and IPv6   Dhananjay Phadke
    • u-boot and IPv6   Chris Packham
• [SPAM] [PATCH 0/4] mtd: spi: arm: rk3399: rock-pi-4: u-boot/next Support SPI NOR Flash in Rock Pi 4 (XTX xt25f32b)   Xavier Drudis Ferran
  • [SPAM] [PATCH 0/4] mtd: spi: arm: rk3399: rock-pi-4: u-boot/next Support SPI NOR Flash in Rock Pi 4 (XTX xt25f32b)   Jagan Teki
• [PATCH v1 0/2] add npcm750 function config and dts node   Jim Liu
  • [PATCH v1 1/2] ARM: configs: npcm7xx: add full function for nuvoton npcm750   Jim Liu
    • [PATCH v1 1/2] ARM: configs: npcm7xx: add full function for nuvoton npcm750   Tom Rini
  • [PATCH v1 2/2] ARM: dts: npcm7xx: add npcm750 full function node   Jim Liu
• [PATCH v4] imx: support i.MX8QM DMSSE20 a1 board   Oliver Graute
  • [PATCH v4] imx: support i.MX8QM DMSSE20 a1 board   Marcel Ziswiler
• [PATCH 1/1] MAINTAINERS: add Ilias Apalodimas to EFI PAYLOAD as co-maintainer   Heinrich Schuchardt
  • [PATCH 1/1] MAINTAINERS: add Ilias Apalodimas to EFI PAYLOAD as co-maintainer   Ilias Apalodimas
• [PATCH] ARM: relocate: Fix Thumb code by using proper label type   Andre Przywara
  • [PATCH] ARM: relocate: Fix Thumb code by using proper label type   Tom Rini
• [PATCH v5 0/7] Add support for FlexSPI Boot for i.MX8m   Mamta Shukla
  • [PATCH v5 1/7] tools: mkimage: Add support to generate FlexSPI Header for i.MX8m   Mamta Shukla
  • [PATCH v5 2/7] dts: imx8mm-uboot: Add support to pack FlexSPI Header using binman   Mamta Shukla
  • [PATCH v5 3/7] configs: Add config for enabling FSPI boot option for i.MX8m   Mamta Shukla
  • [PATCH v5 4/7] board: freescale: Add QSPI Boot support in spl for i.MX8m   Mamta Shukla
  • [PATCH v5 5/7] configs: imx8mm: Define CONFIG_SYS_UBOOT_BASE for i.MX8m   Mamta Shukla
  • [PATCH v5 6/7] board: freescale: Add entry for imx8mm_evk_fspi_defconfig   Mamta Shukla
  • [PATCH v5 7/7] doc: board: nxp: Add instructions to boot from QSPI   Mamta Shukla
• [gitdm PATCH] reports.py: Add very basic rST output   Tom Rini
• [RESEND PATCH v2] clk: update clk_clean_rate_cache to use private clk struct   Patrick Delaunay
• [PATCH] RFC: Show what the statistics page would look like for v2022.07   Tom Rini
  • [PATCH] RFC: Show what the statistics page would look like for v2022.07   Tom Rini
  • [PATCH] RFC: Show what the statistics page would look like for v2022.07   Heinrich Schuchardt
    • [PATCH] RFC: Show what the statistics page would look like for v2022.07   Tom Rini
• [PATCH v6 0/7] Add support for FlexSPI Boot for i.MX8m   Mamta Shukla
  • [PATCH v6 1/7] tools: mkimage: Add support to generate FlexSPI Header for i.MX8m   Mamta Shukla
    • [PATCH v6 1/7] tools: mkimage: Add support to generate FlexSPI Header for i.MX8m   sbabic at denx.de
  • [PATCH v6 2/7] dts: imx8mm-uboot: Add support to pack FlexSPI Header using binman   Mamta Shukla
    • [PATCH v6 2/7] dts: imx8mm-uboot: Add support to pack FlexSPI Header using binman   sbabic at denx.de
  • [PATCH v6 3/7] configs: Add config for enabling FSPI boot option for i.MX8m   Mamta Shukla
    • [PATCH v6 3/7] configs: Add config for enabling FSPI boot option for i.MX8m   sbabic at denx.de
  • [PATCH v6 4/7] board: freescale: Add QSPI Boot support in spl for i.MX8m   Mamta Shukla
    • [PATCH v6 4/7] board: freescale: Add QSPI Boot support in spl for i.MX8m   sbabic at denx.de
  • [PATCH v6 5/7] configs: imx8mm: Define CONFIG_SYS_UBOOT_BASE for i.MX8m   Mamta Shukla
    • [PATCH v6 5/7] configs: imx8mm: Define CONFIG_SYS_UBOOT_BASE for i.MX8m   sbabic at denx.de
  • [PATCH v6 6/7] board: freescale: Add entry for imx8mm_evk_fspi_defconfig   Mamta Shukla
    • [PATCH v6 6/7] board: freescale: Add entry for imx8mm_evk_fspi_defconfig   sbabic at denx.de
  • [PATCH v6 7/7] doc: board: nxp: Add instructions to boot from QSPI   Mamta Shukla
    • [PATCH v6 7/7] doc: board: nxp: Add instructions to boot from QSPI   sbabic at denx.de
• [PATCH] doc: imx: habv4: Add Secure Boot guide for i.MX8M SPL targets   Marek Vasut
  • [EXT] [PATCH] doc: imx: habv4: Add Secure Boot guide for i.MX8M SPL targets   Utkarsh Gupta
    • [EXT] [PATCH] doc: imx: habv4: Add Secure Boot guide for i.MX8M SPL targets   Marek Vasut
  • [PATCH] doc: imx: habv4: Add Secure Boot guide for i.MX8M SPL targets   sbabic at denx.de
• [RFCv2 1/2] doc: Add statistics page for v2022.07   Tom Rini
  • [RFCv2 1/2] doc: Add statistics page for v2022.07   Heinrich Schuchardt
    • [RFCv2 1/2] doc: Add statistics page for v2022.07   Tom Rini
      • [RFCv2 1/2] doc: Add statistics page for v2022.07   Heinrich Schuchardt
      • [RFCv2 1/2] doc: Add statistics page for v2022.07   Tom Rini
      • [RFCv2 1/2] doc: Add statistics page for v2022.07   Heinrich Schuchardt
      • [RFCv2 1/2] doc: Add statistics page for v2022.07   Tom Rini
      • [RFCv2 1/2] doc: Add statistics page for v2022.07   Heinrich Schuchardt
      • [RFCv2 1/2] doc: Add statistics page for v2022.07   Tom Rini
  • [RFCv2 1/2] doc: Add statistics page for v2022.07   Tom Rini
• [RFCv2 2/2] doc: Add doc/develop/release_cycle.rst   Tom Rini
  • [RFCv2 2/2] doc: Add doc/develop/release_cycle.rst   Sean Anderson
    • [RFCv2 2/2] doc: Add doc/develop/release_cycle.rst   Tom Rini
    • [RFCv2 2/2] doc: Add doc/develop/release_cycle.rst   Heinrich Schuchardt
      • [RFCv2 2/2] doc: Add doc/develop/release_cycle.rst   Tom Rini
• [PATCH 1/2] rockchip: rk3399: fix incorrect ifdef check on SPL_DM_REGULATOR   Quentin Schulz
  • [PATCH 2/2] rockchip: rk3399: fix incorrect ifdef check on SPL_GPIO   Quentin Schulz
    • [PATCH 2/2] rockchip: rk3399: fix incorrect ifdef check on SPL_GPIO   Philipp Tomsich
  • [PATCH 1/2] rockchip: rk3399: fix incorrect ifdef check on SPL_DM_REGULATOR   Philipp Tomsich
• [PATCH 0/4] fix missed migration from SPL_<OPTION>_SUPPORT to SPL_<OPTION>   Quentin Schulz
  • [PATCH 1/4] gpio: fix incorrect depends on for SPL_GPIO_HOG   Quentin Schulz
    • [PATCH 1/4] gpio: fix incorrect depends on for SPL_GPIO_HOG   Simon Glass
  • [PATCH 2/4] mx7ulp_com: fix incorrect select for SPL options   Quentin Schulz
  • [PATCH 3/4] imx: imx8mp_rsb3720a1: fix incorrect ifdef check on SPL_MMC   Quentin Schulz
  • [PATCH 4/4] vpl: fix reference in comment to non-existing SPL_SERIAL_SUPPORT   Quentin Schulz
    • [PATCH 4/4] vpl: fix reference in comment to non-existing SPL_SERIAL_SUPPORT   Simon Glass
• [PATCH 3/3] fpga: Convert FPGA_COUNT to Kconfig   Alexander Dahl
• [PATCH] binman: Increase default fitImage data section resize step from 1k to 64k   Marek Vasut
  • [PATCH] binman: Increase default fitImage data section resize step from 1k to 64k   Simon Glass
    • [PATCH] binman: Increase default fitImage data section resize step from 1k to 64k   Simon Glass
• [PATCH 1/1] fs/fat: correct handling of full directory   Heinrich Schuchardt
• [PATCH] spl_imx_romapi: Remove extraneous character   Tim Harvey
• [gitdm v2] reports.py: Add very basic rST output   Tom Rini
  • [gitdm v2] reports.py: Add very basic rST output   Simon Glass
• [v3 1/4] doc: Add statistics page for v2022.07   Tom Rini
  • [v3 3/4] doc: process: Correct and expand slightly on the Merge Window concept   Tom Rini
    • [v3 3/4] doc: process: Correct and expand slightly on the Merge Window concept   Tom Rini
  • [v3 1/4] doc: Add statistics page for v2022.07   Heinrich Schuchardt
• [v3 2/4] doc: Add doc/develop/release_cycle.rst   Tom Rini
  • [v3 2/4] doc: Add doc/develop/release_cycle.rst   Tom Rini
• [PATCH 0/3] fs/fat: fix handling of full disk   Heinrich Schuchardt
  • [PATCH 1/3] fs: fat: finding an empty FAT cluster   Heinrich Schuchardt
    • [PATCH 1/3] fs: fat: finding an empty FAT cluster   AKASHI Takahiro
  • [PATCH 2/3] fs: fat: determine_fatent() error handling   Heinrich Schuchardt
  • [PATCH 3/3] fs: fat: carve out fat_create_dir_entry()   Heinrich Schuchardt
    • [PATCH 3/3] fs: fat: carve out fat_create_dir_entry()   AKASHI Takahiro
  • [PATCH 0/3] fs/fat: fix handling of full disk   AKASHI Takahiro
• [PATCH] arm: dts: k3-am64-ddr fix typo causing DDR4 register corruption   Anand Gadiyar
  • [PATCH] arm: dts: k3-am64-ddr fix typo causing DDR4 register corruption   Tom Rini
  • [PATCH] arm: dts: k3-am64-ddr fix typo causing DDR4 register corruption   Tom Rini
• [PATCH] serial: zynq: Use DIV_ROUND_CLOSEST() to calcurate divider value   Kunihiko Hayashi
  • [PATCH] serial: zynq: Use DIV_ROUND_CLOSEST() to calcurate divider value   Michal Simek
    • [PATCH] serial: zynq: Use DIV_ROUND_CLOSEST() to calcurate divider value   Kunihiko Hayashi
• [PATCH 0/2] Add RGMII-ID phy-mode support for AVE ethernet controller   Kunihiko Hayashi
  • [PATCH 1/2] net: ave: Add capability of rgmii-id mode   Kunihiko Hayashi
  • [PATCH 2/2] ARM: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins   Kunihiko Hayashi
• [PATCH] arm: dts: mt7622: remove default pinctrl of uart0   Weijie Gao
  • [PATCH] arm: dts: mt7622: remove default pinctrl of uart0   Tom Rini
• 回复: 回复: minor regression in U-Boot 2022.04   Weijie Gao (高惟杰)
• [PATCH] drivers: mmc: Reset watchdog when accessing mmc device   qianfanguijin at 163.com
  • [PATCH] drivers: mmc: Reset watchdog when accessing mmc device   Jaehoon Chung
• [PATCH] [Meson] add magicbox m16s config, dts and doc   Zhang Ning
  • [PATCH] [Meson] add magicbox m16s config, dts and doc   Neil Armstrong
• [PULL] Pull request for u-boot next / v2022.10 = u-boot-stm32-20220712   Patrick DELAUNAY
  • [PULL] Pull request for u-boot next / v2022.10 = u-boot-stm32-20220712   Tom Rini
• [PATCH 00/14] imx: kontron-sl-mx8mm: Improvements and OSM board support   Frieder Schrempf
  • [PATCH 01/14] imx: kontron-sl-mx8mm: Remove LVDS board type and devicetrees   Frieder Schrempf
  • [PATCH 02/14] imx: kontron-sl-mx8mm: Add redundant environment   Frieder Schrempf
  • [PATCH 03/14] imx: kontron-sl-mx8mm: Enable environment in MMC   Frieder Schrempf
  • [PATCH 04/14] imx: kontron-sl-mx8mm: Migrate to use CONFIG_EXTRA_ENV_TEXT   Frieder Schrempf
  • [PATCH 05/14] imx: kontron-sl-mx8mm: Enable bootaux command   Frieder Schrempf
  • [PATCH 06/14] imx: kontron-sl-mx8mm: lpddr4_timing.c: Add spaces for proper alignment   Frieder Schrempf
  • [PATCH 07/14] imx: kontron-sl-mx8mm: Remove 100mt DDR setpoint   Frieder Schrempf
  • [PATCH 08/14] imx: kontron-sl-mx8mm: Use new LPDDR4 config parameters   Frieder Schrempf
  • [PATCH 09/14] imx: kontron-sl-mx8mm: Prepare for other i.MX8MM SoM types   Frieder Schrempf
  • [PATCH 10/14] imx: kontron-sl-mx8mm: Adjust board and SoM model strings   Frieder Schrempf
  • [PATCH 11/14] imx: kontron-sl-mx8mm: Use the VSELECT signal to switch SD card IO voltage   Frieder Schrempf
    • [PATCH 11/14] imx: kontron-sl-mx8mm: Use the VSELECT signal to switch SD card IO voltage   Heiko Thiery
  • [PATCH 12/14] imx: kontron-sl-mx8mm: Use voltage rail names from schematic for PMIC regulator-names   Frieder Schrempf
  • [PATCH 13/14] imx: kontron-sl-mx8mm: Simplify code in spl.c   Frieder Schrempf
  • [PATCH 14/14] imx: kontron-sl-mx8mm: Add support for Kontron Electronics SoM SL i.MX8MM OSM-S   Frieder Schrempf
  • [PATCH 00/14] imx: kontron-sl-mx8mm: Improvements and OSM board support   Stefano Babic
• PRAM and reserved memory for Linux   Joakim Tjernlund
  • PRAM and reserved memory for Linux   Tom Rini
    • PRAM and reserved memory for Linux   Joakim Tjernlund
      • PRAM and reserved memory for Linux   Tom Rini
• [PATCH] armv8: mach-k3: correct define checking for AM625/AM642 memory maps   Matt Ranostay
  • [PATCH] armv8: mach-k3: correct define checking for AM625/AM642 memory maps   Tom Rini
  • [PATCH] armv8: mach-k3: correct define checking for AM625/AM642 memory maps   Tom Rini
• [PATCH 0/3] Test and docs for fdt command   Simon Glass
  • [PATCH 1/3] addrmap: Support on sandbox   Simon Glass
    • [PATCH 1/3] addrmap: Support on sandbox   Simon Glass
  • [PATCH 2/3] fdt: Start a test for the fdt command   Simon Glass
    • [PATCH 2/3] fdt: Start a test for the fdt command   Simon Glass
  • [PATCH 3/3] doc: Make a start on docs for fdt command   Simon Glass
    • [PATCH 3/3] doc: Make a start on docs for fdt command   Simon Glass
• [PATCH v2 0/2] fpga: Convert some options to Kconfig   Alexander Dahl
  • [PATCH v2 1/2] fpga: Convert SYS_FPGA_CHECK_CTRLC to Kconfig   Alexander Dahl
    • [PATCH v2 1/2] fpga: Convert SYS_FPGA_CHECK_CTRLC to Kconfig   Michal Simek
      • [PATCH v2 1/2] fpga: Convert SYS_FPGA_CHECK_CTRLC to Kconfig   Alexander Dahl
      • [PATCH v2 1/2] fpga: Convert SYS_FPGA_CHECK_CTRLC to Kconfig   Michal Simek
      • [PATCH v2 1/2] fpga: Convert SYS_FPGA_CHECK_CTRLC to Kconfig   Alexander Dahl
      • [PATCH v2 1/2] fpga: Convert SYS_FPGA_CHECK_CTRLC to Kconfig   Michal Simek
      • [PATCH v2 1/2] fpga: Convert SYS_FPGA_CHECK_CTRLC to Kconfig   Tom Rini
  • [PATCH v2 2/2] fpga: Convert SYS_FPGA_PROG_FEEDBACK to Kconfig   Alexander Dahl
    • [PATCH v2 2/2] fpga: Convert SYS_FPGA_PROG_FEEDBACK to Kconfig   Michal Simek
      • [PATCH v2 2/2] fpga: Convert SYS_FPGA_PROG_FEEDBACK to Kconfig   Alexander Dahl
      • [PATCH v2 2/2] fpga: Convert SYS_FPGA_PROG_FEEDBACK to Kconfig   Tom Rini
• net: emaclite: Fixes, enable driver for other archs   Samuel Obuch
  • [PATCH 1/3] net: emaclite: fix broken build   Samuel Obuch
  • [PATCH 2/3] net: emaclite: fix xemaclite_alignedread/write functions   Samuel Obuch
  • [PATCH 3/3] net: emaclite: fix handling for IP packets with specific lengths   Samuel Obuch
• [PATCH 0/3] sunxi: FEL boot fixes   Andre Przywara
  • [PATCH 1/3] sunxi: armv8: fel: load only 32-bit values   Andre Przywara
  • [PATCH 2/3] sunxi: h616: lower SPL stack address to avoid BROM data   Andre Przywara
  • [PATCH 3/3] sunxi: fel: drop redundant "control register" save/restore   Andre Przywara
• [PATCH] sunxi: configs: streamline include/configs/sun*.h wrappers   Andre Przywara
  • [PATCH] sunxi: configs: streamline include/configs/sun*.h wrappers   Tom Rini
• [PATCH] board: ti: am65x: Do not disable SA2UL in DT   Andrew Davis
  • [PATCH] board: ti: am65x: Do not disable SA2UL in DT   Tom Rini
  • [PATCH] board: ti: am65x: Do not disable SA2UL in DT   Tom Rini
• [PATCH 0/3] sunxi: remove CONFIG_MMC?_CD_PIN   Andre Przywara
  • [PATCH 1/3] sunxi: mmc: ignore card detect in SPL   Andre Przywara
  • [PATCH 2/3] sunxi: mmc: group non-DM specific functions   Andre Przywara
  • [PATCH 3/3] sunxi: remove CONFIG_MMC?_CD_PIN   Andre Przywara
• [PATCH] dm: fix mis-word in SPL_DM description   Oleksandr Suvorov
  • [PATCH] dm: fix mis-word in SPL_DM description   Simon Glass
    • [PATCH] dm: fix mis-word in SPL_DM description   Simon Glass
• [PATCH] arm: dts: db410c/db820c: Fix SPMI addresses   Stephan Gerhold
  • [PATCH] arm: dts: db410c/db820c: Fix SPMI addresses   Sumit Garg
  • [PATCH] arm: dts: db410c/db820c: Fix SPMI addresses   Tom Rini
• Pull request for efi-2022-10-rc1   Heinrich Schuchardt
  • Pull request for efi-2022-10-rc1   Tom Rini
• [PATCH] spl: sdp: Pass the USB index to board_usb_init()   Fabio Estevam
  • [PATCH] spl: sdp: Pass the USB index to board_usb_init()   Peng Fan
• [PATCH 1/2] powerpc: mpc85xx: Add support for generating QorIQ pre-PBL eSDHC boot sector   Pali Rohár
  • [PATCH 1/2] powerpc: mpc85xx: Add support for generating QorIQ pre-PBL eSDHC boot sector   Pali Rohár
• [PATCH v2] mmc: fsl_esdhc_spl: Add support for loading proper U-Boot from unaligned location   Pali Rohár
  • [PATCH v2] mmc: fsl_esdhc_spl: Add support for loading proper U-Boot from unaligned location   Pali Rohár
  • [PATCH v2] mmc: fsl_esdhc_spl: Add support for loading proper U-Boot from unaligned location   Jaehoon Chung
• [PATCH 0/6] mtd: nand: sunxi: Convert to devicetree and the driver model   Samuel Holland
  • [PATCH 3/6] mtd: nand: sunxi: Remove an unnecessary check   Samuel Holland
    • [PATCH 3/6] mtd: nand: sunxi: Remove an unnecessary check   Michael Nazzareno Trimarchi
  • [PATCH 4/6] mtd: nand: sunxi: Convert from fdtdec to ofnode   Samuel Holland
  • [PATCH 5/6] mtd: nand: sunxi: Convert to the driver model   Samuel Holland
    • [PATCH 5/6] mtd: nand: sunxi: Convert to the driver model   Michael Nazzareno Trimarchi
  • [PATCH 6/6] mtd: nand: sunxi: Pass the device to the init function   Samuel Holland
  • [PATCH 0/6] mtd: nand: sunxi: Convert to devicetree and the driver model   Michael Nazzareno Trimarchi
    • [PATCH 0/6] mtd: nand: sunxi: Convert to devicetree and the driver model   Icenowy Zheng
• [PATCH 1/6] clk: sunxi: Add NAND clocks and resets   Samuel Holland
  • [PATCH 1/6] clk: sunxi: Add NAND clocks and resets   Jagan Teki
  • [PATCH 1/6] clk: sunxi: Add NAND clocks and resets   Andre Przywara
    • [PATCH 1/6] clk: sunxi: Add NAND clocks and resets   Samuel Holland
• [PATCH 2/6] pinctrl: sunxi: Add NAND pinmuxes   Samuel Holland
  • [PATCH 2/6] pinctrl: sunxi: Add NAND pinmuxes   Jagan Teki
  • [PATCH 2/6] pinctrl: sunxi: Add NAND pinmuxes   Andre Przywara
    • [PATCH 2/6] pinctrl: sunxi: Add NAND pinmuxes   Michael Nazzareno Trimarchi
    • [PATCH 2/6] pinctrl: sunxi: Add NAND pinmuxes   Samuel Holland
• [PATCH 1/1] efi_loader: remove support for CONFIG_LCD   Heinrich Schuchardt
  • [PATCH 1/1] efi_loader: remove support for CONFIG_LCD   Ilias Apalodimas
• [PATCH 1/1] cmd: remove deprecated LCD support   Heinrich Schuchardt
• [PATCH] arm: dts: qcom: Sync pinctrl DT nodes with Linux bindings   Sumit Garg
  • [PATCH] arm: dts: qcom: Sync pinctrl DT nodes with Linux bindings   Stephan Gerhold
    • [PATCH] arm: dts: qcom: Sync pinctrl DT nodes with Linux bindings   Sumit Garg
      • [PATCH] arm: dts: qcom: Sync pinctrl DT nodes with Linux bindings   Stephan Gerhold
      • [PATCH] arm: dts: qcom: Sync pinctrl DT nodes with Linux bindings   Sumit Garg
• [PULL] u-boot-mips for v2022.10   Daniel Schwierzeck
  • [PULL] u-boot-mips for v2022.10   Tom Rini
• [v3 1/7] doc: Migrate CodingStyle wiki page to Sphinx   Tom Rini
  • [v3 2/7] doc: Migrate DesignPrinciples wiki page to Sphinx   Tom Rini
  • [v3 3/7] doc: codingstyle: Remove comment about '//' style comments   Tom Rini
  • [v3 4/7] doc: Migrate Process wiki page to Sphinx   Tom Rini
  • [v3 5/7] designprinciples.rst: Perform minor cleanups   Tom Rini
  • [v3 6/7] process.rst: Perform minor cleanups   Tom Rini
  • [v3 7/7] process.rst: Modernize the "Workflow of a Custodian" section   Tom Rini
  • [v3 1/7] doc: Migrate CodingStyle wiki page to Sphinx   Tom Rini
• [PATCH v2] xilinx: zynqmp: Do not use 0 as spl bss start address   Stefan Herbrechtsmeier
  • [PATCH v2] xilinx: zynqmp: Do not use 0 as spl bss start address   Michal Simek
• [PATCH v2 0/5] board: sl28: various updates   Michael Walle
  • [PATCH v2 2/5] board: sl28: implement additional bootsources   Michael Walle
  • [PATCH v2 3/5] board: sl28: add user friendly names for the boot sources   Michael Walle
  • [PATCH v2 4/5] board: sl28: support dynamic prompts   Michael Walle
  • [PATCH v2 5/5] board: sl28: remove COUNTER_FREQUENCY_REAL   Michael Walle
• [PATCH v2 1/5] armv8: layerscape: spl: mark OCRAM as non-secure   Michael Walle
• [PATCH v3] xilinx: zynqmp: Do not use 0 as spl bss start address   Stefan Herbrechtsmeier
  • [PATCH v3] xilinx: zynqmp: Do not use 0 as spl bss start address   Michal Simek
• [PATCH] rockchip: rk3308: fix rockchip_dnl_key_pressed() on roc-cc   John Keeping
• [PATCH] rockchip: rk3308: fix same-as-spl boot order   John Keeping
  • [PATCH] rockchip: rk3308: fix same-as-spl boot order   Philipp Tomsich
• [PATCH v3 0/2] usb: dwc3: add a SPL_USB_DWC3_GENERIC option for the dwc3 driver   Angus Ainslie
  • [PATCH v3 0/2] usb: dwc3: add a SPL_USB_DWC3_GENERIC option for the dwc3 driver   Marek Vasut
    • [PATCH v3 0/2] usb: dwc3: add a SPL_USB_DWC3_GENERIC option for the dwc3 driver   Angus Ainslie
      • [PATCH v3 0/2] usb: dwc3: add a SPL_USB_DWC3_GENERIC option for the dwc3 driver   Marek Vasut
      • [PATCH v3 0/2] usb: dwc3: add a SPL_USB_DWC3_GENERIC option for the dwc3 driver   Angus Ainslie
      • [PATCH v3 0/2] usb: dwc3: add a SPL_USB_DWC3_GENERIC option for the dwc3 driver   Marek Vasut
• [PATCH 01/11] mtd: nand: Get rid of busw parameter   Michael Trimarchi
• [PATCH 02/11] mtd: nand: Store nand ID in struct nand_chip   Michael Trimarchi
• [PATCH 03/11] mtd: nand: Add manufacturer specific initialization/detection steps   Michael Trimarchi
• [PATCH 04/11] mtd: nand: Get rid of mtd variable in function calls   Michael Trimarchi
• [PATCH 05/11] mtd: nand: Export symbol nand_decode_ext_id   Michael Trimarchi
• [PATCH 06/11] mtd: nand: Move Samsung specific init/detection logic in nand_samsung.c   Michael Trimarchi
• [PATCH 07/11] mtd: nand: Move Hynix specific init/detection logic in nand_hynix.c   Michael Trimarchi
• [PATCH 08/11] mtd: nand: Move Toshiba specific init/detection logic in nand_toshiba.c   Michael Trimarchi
• [PATCH 09/11] mtd: nand: Move Micron specific init logic in nand_micron.c   Michael Trimarchi
• [PATCH 10/11] mtd: nand: Move AMD/Spansion specific init/detection logic in nand_amd.c   Michael Trimarchi
• [PATCH 11/11] mtd: nand: Move Macronix specific initialization in nand_macronix.c   Michael Trimarchi
• [PATCH 00/11] Port manufacturer specific initialization   Michael Trimarchi
• [PULL] u-boot-usb/master   Marek Vasut
  • [PULL] u-boot-usb/master   Tom Rini
  • [PULL] u-boot-usb/master   Marek Vasut
    • [PULL] u-boot-usb/master   Tom Rini
• [PATCH v4 0/2] usb: dwc3: add a SPL_USB_DWC3_GENERIC option for the dwc3 driver   Angus Ainslie
  • [PATCH v4 1/2] usb: dwc3: add a SPL_USB_DWC3_GENERIC option for the dwc3 driver   Angus Ainslie
  • [PATCH v4 2/2] configs: get rid of build warnings due to SPL_USB_DWC3_GENERIC   Angus Ainslie
  • [PATCH v4 0/2] usb: dwc3: add a SPL_USB_DWC3_GENERIC option for the dwc3 driver   Marek Vasut
    • [PATCH v4 0/2] usb: dwc3: add a SPL_USB_DWC3_GENERIC option for the dwc3 driver   Angus Ainslie
• [PATCH v7 00/13] FWU: Add FWU Multi Bank Update feature support   Sughosh Ganu
  • [PATCH v7 01/13] dt/bindings: Add bindings for FWU Metadata storage device   Sughosh Ganu
    • [PATCH v7 01/13] dt/bindings: Add bindings for FWU Metadata storage device   Heinrich Schuchardt
    • [PATCH v7 01/13] dt/bindings: Add bindings for FWU Metadata storage device   Jassi Brar
      • [PATCH v7 01/13] dt/bindings: Add bindings for FWU Metadata storage device   Sughosh Ganu
  • [PATCH v7 02/13] FWU: Add FWU metadata structure and driver for accessing metadata   Sughosh Ganu
    • [PATCH v7 02/13] FWU: Add FWU metadata structure and driver for accessing metadata   Ilias Apalodimas
  • [PATCH v7 03/13] FWU: Add FWU metadata access driver for GPT partitioned block devices   Sughosh Ganu
  • [PATCH v7 04/13] stm32mp1: dk2: Add a node for the FWU metadata device   Sughosh Ganu
    • [PATCH v7 04/13] stm32mp1: dk2: Add a node for the FWU metadata device   Ilias Apalodimas
  • [PATCH v7 05/13] stm32mp1: dk2: Add image information for capsule updates   Sughosh Ganu
    • [PATCH v7 05/13] stm32mp1: dk2: Add image information for capsule updates   Ilias Apalodimas
  • [PATCH v7 06/13] FWU: stm32mp1: Add helper functions for accessing FWU metadata   Sughosh Ganu
    • [PATCH v7 06/13] FWU: stm32mp1: Add helper functions for accessing FWU metadata   Ilias Apalodimas
    • [PATCH v7 06/13] FWU: stm32mp1: Add helper functions for accessing FWU metadata   Jassi Brar
      • [PATCH v7 06/13] FWU: stm32mp1: Add helper functions for accessing FWU metadata   Sughosh Ganu
  • [PATCH v7 07/13] FWU: STM32MP1: Add support to read boot index from backup register   Sughosh Ganu
    • [PATCH v7 07/13] FWU: STM32MP1: Add support to read boot index from backup register   Ilias Apalodimas
  • [PATCH v7 08/13] FWU: Add boot time checks as highlighted by the FWU specification   Sughosh Ganu
    • [PATCH v7 08/13] FWU: Add boot time checks as highlighted by the FWU specification   Ilias Apalodimas
      • [PATCH v7 08/13] FWU: Add boot time checks as highlighted by the FWU specification   Ilias Apalodimas
      • [PATCH v7 08/13] FWU: Add boot time checks as highlighted by the FWU specification   Sughosh Ganu
  • [PATCH v7 09/13] FWU: Add support for the FWU Multi Bank Update feature   Sughosh Ganu
    • [PATCH v7 09/13] FWU: Add support for the FWU Multi Bank Update feature   Ilias Apalodimas
  • [PATCH v7 10/13] FWU: cmd: Add a command to read FWU metadata   Sughosh Ganu
    • [PATCH v7 10/13] FWU: cmd: Add a command to read FWU metadata   Ilias Apalodimas
  • [PATCH v7 11/13] mkeficapsule: Add support for generating empty capsules   Sughosh Ganu
    • [PATCH v7 11/13] mkeficapsule: Add support for generating empty capsules   Ilias Apalodimas
  • [PATCH v7 12/13] mkeficapsule: Add support for setting OEM flags in capsule header   Sughosh Ganu
    • [PATCH v7 12/13] mkeficapsule: Add support for setting OEM flags in capsule header   Ilias Apalodimas
      • [PATCH v7 12/13] mkeficapsule: Add support for setting OEM flags in capsule header   Sughosh Ganu
  • [PATCH v7 13/13] FWU: doc: Add documentation for the FWU feature   Sughosh Ganu
    • [PATCH v7 13/13] FWU: doc: Add documentation for the FWU feature   Heinrich Schuchardt
  • [PATCH 0/5] FWU: Add support for mtd backed feature on DeveloperBox   jassisinghbrar at gmail.com
    • [PATCH 0/5] FWU: Add support for mtd backed feature on DeveloperBox   jassisinghbrar at gmail.com
      • [PATCH 1/5] dt/bindings: Add bindings for FWU Metadata mtd storage   jassisinghbrar at gmail.com
      • [PATCH 1/5] dt/bindings: Add bindings for FWU Metadata mtd storage   Sughosh Ganu
      • [PATCH 2/5] FWU: Add FWU metadata access driver for MTD storage regions   jassisinghbrar at gmail.com
      • [PATCH 3/5] FWU: mtd: Add helper functions for accessing FWU metadata   jassisinghbrar at gmail.com
      • [PATCH 4/5] dt: fwu: developerbox: enable fwu banks and mdata regions   jassisinghbrar at gmail.com
      • [PATCH 5/5] fwu: DeveloperBox: add support for FWU   jassisinghbrar at gmail.com
    • [PATCH 0/5] FWU: Add support for mtd backed feature on DeveloperBox   Sughosh Ganu
      • [PATCH 0/5] FWU: Add support for mtd backed feature on DeveloperBox   Jassi Brar
• [PATCH] mmc: Do not send status of send_status is false   Marek Vasut
  • [PATCH] mmc: Do not send status of send_status is false   Marek Behún
    • [PATCH] mmc: Do not send status of send_status is false   Marek Vasut
  • [PATCH] mmc: Do not send status of send_status is false   Jaehoon Chung
• [PATCH 1/2] phy: sun4i-usb: Do not drive VBUS with external VBUS present   Samuel Holland
  • [PATCH 2/2] musb: sunxi: Allow host-side USB with external VBUS   Samuel Holland
• [PATCH 0/4] phy: sun4i-usb: Allwinner D1 Support   Samuel Holland
  • [PATCH 1/4] sunxi: Move INITIAL_USB_SCAN_DELAY to driver Kconfig   Samuel Holland
    • [PATCH 1/4] sunxi: Move INITIAL_USB_SCAN_DELAY to driver Kconfig   Jagan Teki
  • [PATCH 2/4] phy: sun4i-usb: Drop use of arch-specific headers   Samuel Holland
    • [PATCH 2/4] phy: sun4i-usb: Drop use of arch-specific headers   Jagan Teki
  • [PATCH 3/4] phy: sun4i-usb: Rework HCI PHY (aka "pmu_unk1") handling   Samuel Holland
    • [PATCH 3/4] phy: sun4i-usb: Rework HCI PHY (aka "pmu_unk1") handling   Jagan Teki
  • [PATCH 4/4] phy: sun4i-usb: Add D1 variant   Samuel Holland
    • [PATCH 4/4] phy: sun4i-usb: Add D1 variant   Jagan Teki
• [PATCH 0/3] net: sun8i-emac: Allwinner D1 Support   Samuel Holland
  • [PATCH 1/3] net: sun8i-emac: Downgrade printf during probe to debug   Samuel Holland
    • [PATCH 1/3] net: sun8i-emac: Downgrade printf during probe to debug   Andre Przywara
  • [PATCH 2/3] net: sun8i-emac: Drop use of arch-specific header   Samuel Holland
    • [PATCH 2/3] net: sun8i-emac: Drop use of arch-specific header   Andre Przywara
  • [PATCH 3/3] net: sun8i-emac: Use common syscon setup for R40   Samuel Holland
    • [PATCH 3/3] net: sun8i-emac: Use common syscon setup for R40   Jagan Teki
• [PATCH] mtd: decommission the NAND museum   Michael Trimarchi
• [PATCH] tools: relocate-rela: Fix ELF decoding on big-endian hosts   Samuel Holland
  • [PATCH] tools: relocate-rela: Fix ELF decoding on big-endian hosts   Michal Simek
• [PATCH] arm: mvebu: Avoid reading MVEBU_REG_PCIE_DEVID register too many times   Pali Rohár
  • [PATCH] arm: mvebu: Avoid reading MVEBU_REG_PCIE_DEVID register too many times   Marek Behún
  • [PATCH] arm: mvebu: Avoid reading MVEBU_REG_PCIE_DEVID register too many times   Stefan Roese
  • [PATCH] arm: mvebu: Avoid reading MVEBU_REG_PCIE_DEVID register too many times   Stefan Roese
• [PATCH] arm: mvebu: turris_omnia: Set ETHPRIME to DT alias   Pali Rohár
  • [PATCH] arm: mvebu: turris_omnia: Set ETHPRIME to DT alias   Marek Behún
    • [PATCH] arm: mvebu: turris_omnia: Set ETHPRIME to DT alias   Pali Rohár
  • [PATCH] arm: mvebu: turris_omnia: Set ETHPRIME to DT alias   Stefan Roese
  • [PATCH] arm: mvebu: turris_omnia: Set ETHPRIME to DT alias   Stefan Roese
• kontron_pitx_imx8m does not start   Heiko Thiery
  • kontron_pitx_imx8m does not start   Marek Vasut
    • kontron_pitx_imx8m does not start   Heiko Thiery
      • kontron_pitx_imx8m does not start   Michael Nazzareno Trimarchi
      • kontron_pitx_imx8m does not start   Heiko Thiery
      • kontron_pitx_imx8m does not start   Michael Nazzareno Trimarchi
      • kontron_pitx_imx8m does not start   Marek Vasut
      • kontron_pitx_imx8m does not start   Heiko Thiery
  • kontron_pitx_imx8m does not start   Fabio Estevam
    • kontron_pitx_imx8m does not start   Fabio Estevam
      • kontron_pitx_imx8m does not start   Heiko Thiery
    • kontron_pitx_imx8m does not start   Heiko Thiery
      • kontron_pitx_imx8m does not start   Peng Fan
      • kontron_pitx_imx8m does not start   Heiko Thiery
      • kontron_pitx_imx8m does not start   Peng Fan
      • kontron_pitx_imx8m does not start   Heiko Thiery
• [PATCH 0/5] Enable power domain driver in ZynqMP and Versal   Ashok Reddy Soma
  • [PATCH 1/5] firmware: zynqmp: Change prototype of zynqmp_pmufw_load_config_object()   Ashok Reddy Soma
  • [PATCH 2/5] firmware: zynqmp: Load config overlay for core0 to pmufw   Ashok Reddy Soma
    • [PATCH 2/5] firmware: zynqmp: Load config overlay for core0 to pmufw   Stefan Herbrechtsmeier
      • [PATCH 2/5] firmware: zynqmp: Load config overlay for core0 to pmufw   Michal Simek
      • [PATCH 2/5] firmware: zynqmp: Load config overlay for core0 to pmufw   Stefan Herbrechtsmeier
      • [PATCH 2/5] firmware: zynqmp: Load config overlay for core0 to pmufw   Soma, Ashok Reddy
      • [PATCH 2/5] firmware: zynqmp: Load config overlay for core0 to pmufw   Stefan Herbrechtsmeier
      • [PATCH 2/5] firmware: zynqmp: Load config overlay for core0 to pmufw   Soma, Ashok Reddy
  • [PATCH 3/5] arm64: zynqmp: Enable power domain driver   Ashok Reddy Soma
  • [PATCH 4/5] mailbox: zynqmp: Move struct zynqmp_ipi_msg from sys_proto.h   Ashok Reddy Soma
  • [PATCH 5/5] arm64: versal: Enable power domain driver and its dependencies   Ashok Reddy Soma
• [REGRESSION]: v2022.07: SHA256 hash is broken on imx8m series with CAAM enabled   ZHIZHIKIN Andrey
  • [EXT] [REGRESSION]: v2022.07: SHA256 hash is broken on imx8m series with CAAM enabled   Gaurav Jain
    • [EXT] [REGRESSION]: v2022.07: SHA256 hash is broken on imx8m series with CAAM enabled   ZHIZHIKIN Andrey
      • [EXT] [REGRESSION]: v2022.07: SHA256 hash is broken on imx8m series with CAAM enabled   Gaurav Jain
      • [EXT] [REGRESSION]: v2022.07: SHA256 hash is broken on imx8m series with CAAM enabled   ZHIZHIKIN Andrey
      • [EXT] [REGRESSION]: v2022.07: SHA256 hash is broken on imx8m series with CAAM enabled   Fabio Estevam
      • [EXT] [REGRESSION]: v2022.07: SHA256 hash is broken on imx8m series with CAAM enabled   Gaurav Jain
• [PATCH] socfpga_de0_nano_soc: enable CONFIG_USE_BOOTCOMMAND   Vijai Kumar K
• [PATCH 0/4] Xilinx zynq_qspi updates   Ashok Reddy Soma
  • [PATCH 1/4] spi: zynq_qspi: Add child pre probe function   Ashok Reddy Soma
  • [PATCH 2/4] spi: zynq_qspi: Use dummy buswidth in dummy byte calculation   Ashok Reddy Soma
  • [PATCH 3/4] spi: zynq_qspi: Add support for zynq_qspi_mem_exec_op   Ashok Reddy Soma
  • [PATCH 4/4] spi: zynq_qspi: Fix programming qspi speed   Ashok Reddy Soma
  • [PATCH 0/4] Xilinx zynq_qspi updates   Michal Simek
• [PATCH 0/9] enable menu-driven UEFI variable maintenance   Masahisa Kojima
  • [PATCH 1/9] efi_loader: move udevice pointer into struct efi_object   Masahisa Kojima
  • [PATCH 2/9] eficonfig: menu-driven addition of UEFI boot option   Masahisa Kojima
  • [PATCH 3/9] eficonfig: add "Edit Boot Option" menu entry   Masahisa Kojima
  • [PATCH 4/9] menu: add KEY_PLUS and KEY_MINUS handling   Masahisa Kojima
  • [PATCH 5/9] eficonfig: add "Change Boot Order" menu entry   Masahisa Kojima
  • [PATCH 6/9] eficonfig: add "Delete Boot Option" menu entry   Masahisa Kojima
  • [PATCH 7/9] bootmenu: add removable media entries   Masahisa Kojima
  • [PATCH 8/9] doc:bootmenu: add description for UEFI boot support   Masahisa Kojima
  • [PATCH 9/9] doc:eficonfig: add documentation for eficonfig command   Masahisa Kojima
• [RESEND v9 0/9] enable menu-driven UEFI variable maintenance   Masahisa Kojima
  • [RESEND v9 1/9] efi_loader: move udevice pointer into struct efi_object   Masahisa Kojima
    • [RESEND v9 1/9] efi_loader: move udevice pointer into struct efi_object   Heinrich Schuchardt
      • [RESEND v9 1/9] efi_loader: move udevice pointer into struct efi_object   Heinrich Schuchardt
      • [RESEND v9 1/9] efi_loader: move udevice pointer into struct efi_object   Takahiro Akashi
      • [RESEND v9 1/9] efi_loader: move udevice pointer into struct efi_object   Heinrich Schuchardt
      • [RESEND v9 1/9] efi_loader: move udevice pointer into struct efi_object   Masahisa Kojima
      • [RESEND v9 1/9] efi_loader: move udevice pointer into struct efi_object   Takahiro Akashi
      • [RESEND v9 1/9] efi_loader: move udevice pointer into struct efi_object   Heinrich Schuchardt
      • [RESEND v9 1/9] efi_loader: move udevice pointer into struct efi_object   Takahiro Akashi
  • [RESEND v9 2/9] eficonfig: menu-driven addition of UEFI boot option   Masahisa Kojima
    • [RESEND v9 2/9] eficonfig: menu-driven addition of UEFI boot option   Ilias Apalodimas
      • [RESEND v9 2/9] eficonfig: menu-driven addition of UEFI boot option   Masahisa Kojima
      • [RESEND v9 2/9] eficonfig: menu-driven addition of UEFI boot option   Ilias Apalodimas
    • [RESEND v9 2/9] eficonfig: menu-driven addition of UEFI boot option   Ilias Apalodimas
      • [RESEND v9 2/9] eficonfig: menu-driven addition of UEFI boot option   Masahisa Kojima
  • [RESEND v9 3/9] eficonfig: add "Edit Boot Option" menu entry   Masahisa Kojima
  • [RESEND v9 4/9] menu: add KEY_PLUS and KEY_MINUS handling   Masahisa Kojima
    • [RESEND v9 4/9] menu: add KEY_PLUS and KEY_MINUS handling   Ilias Apalodimas
  • [RESEND v9 5/9] eficonfig: add "Change Boot Order" menu entry   Masahisa Kojima
    • [RESEND v9 5/9] eficonfig: add "Change Boot Order" menu entry   Ilias Apalodimas
  • [RESEND v9 6/9] eficonfig: add "Delete Boot Option" menu entry   Masahisa Kojima
  • [RESEND v9 7/9] bootmenu: add removable media entries   Masahisa Kojima
    • [RESEND v9 7/9] bootmenu: add removable media entries   Ilias Apalodimas
  • [RESEND v9 8/9] doc:bootmenu: add description for UEFI boot support   Masahisa Kojima
    • [RESEND v9 8/9] doc:bootmenu: add description for UEFI boot support   Ilias Apalodimas
  • [RESEND v9 9/9] doc:eficonfig: add documentation for eficonfig command   Masahisa Kojima
    • [RESEND v9 9/9] doc:eficonfig: add documentation for eficonfig command   Ilias Apalodimas
      • [RESEND v9 9/9] doc:eficonfig: add documentation for eficonfig command   Masahisa Kojima
      • [RESEND v9 9/9] doc:eficonfig: add documentation for eficonfig command   Ilias Apalodimas
      • [RESEND v9 9/9] doc:eficonfig: add documentation for eficonfig command   Masahisa Kojima
• [PATCH v2 1/2] rockchip: rk3399: fix incorrect ifdef check on SPL_DM_REGULATOR   Quentin Schulz
  • [PATCH v2 2/2] rockchip: rk3399: fix incorrect ifdef check on SPL_GPIO   Quentin Schulz
    • [SPAM] [PATCH v2 2/2] rockchip: rk3399: fix incorrect ifdef check on SPL_GPIO   Xavier Drudis Ferran
    • [SPAM] [PATCH v2 2/2] rockchip: rk3399: fix incorrect ifdef check on SPL_GPIO   Xavier Drudis Ferran
  • [SPAM] [PATCH v2 1/2] rockchip: rk3399: fix incorrect ifdef check on SPL_DM_REGULATOR   Xavier Drudis Ferran
• [RFC PATCH 1/2] spl: enable regulator-boot-on and disable regulator-force-boot-off   Quentin Schulz
  • [RFC PATCH 2/2] rockchip: rk3399: remove duplicate call to regulators_enable_boot_on   Quentin Schulz
    • [SPAM] [RFC PATCH 2/2] rockchip: rk3399: remove duplicate call to regulators_enable_boot_on   Xavier Drudis Ferran
  • [SPAM] [RFC PATCH 1/2] spl: enable regulator-boot-on and disable regulator-force-boot-off   Xavier Drudis Ferran
    • [SPAM] [RFC PATCH 1/2] spl: enable regulator-boot-on and disable regulator-force-boot-off   Xavier Drudis Ferran
  • [SPAM] [RFC PATCH 1/2] spl: enable regulator-boot-on and disable regulator-force-boot-off   Xavier Drudis Ferran
• [PATCH 1/2] rockchip: rk3399: fix incorrect boot-device in u-boot, spl-boot-device   Quentin Schulz
  • [PATCH 2/2] rockchip: rk3399: sync spl_boot_devices_tbl and boot_devices node paths   Quentin Schulz
    • [PATCH 2/2] rockchip: rk3399: sync spl_boot_devices_tbl and boot_devices node paths   Xavier Drudis Ferran
  • [SPAM] [PATCH 1/2] rockchip: rk3399: fix incorrect boot-device in u-boot, spl-boot-device   Xavier Drudis Ferran
• [PATCH 1/2] arm: mach-k3: Only build init files for SPL   Andrew Davis
  • [PATCH 2/2] arm: mach-k3: Rename SOC_K3_AM6 to SOC_K3_AM654   Andrew Davis
    • [PATCH 2/2] arm: mach-k3: Rename SOC_K3_AM6 to SOC_K3_AM654   Tom Rini
    • [PATCH 2/2] arm: mach-k3: Rename SOC_K3_AM6 to SOC_K3_AM654   Tom Rini
  • [PATCH 1/2] arm: mach-k3: Only build init files for SPL   Tom Rini
  • [PATCH 1/2] arm: mach-k3: Only build init files for SPL   Tom Rini
• [PATCH] spl: Move check for SPL_LIBCOMMON support to header   Andrew Davis
  • [PATCH] spl: Move check for SPL_LIBCOMMON support to header   Simon Glass
    • [PATCH] spl: Move check for SPL_LIBCOMMON support to header   Andrew Davis
  • [PATCH] spl: Move check for SPL_LIBCOMMON support to header   Tom Rini
  • [PATCH] spl: Move check for SPL_LIBCOMMON support to header   Tom Rini
• [RFC PATCH 0/8] migrate u-boot-rockchip.bin to binman and generate an image for SPI   Quentin Schulz
  • [RFC PATCH 1/8] rockchip: generate idbloader.img content for u-boot-rockchip.bin with binman for ARM   Quentin Schulz
  • [RFC PATCH 2/8] rockchip: generate u-boot-rockchip.bin with binman for ARM64 boards   Quentin Schulz
  • [RFC PATCH 3/8] rockchip: remove unneeded CONFIG_SPL_PAD_TO   Quentin Schulz
  • [RFC PATCH 4/8] rockchip: pad u-boot-rockchip.bin correctly   Quentin Schulz
    • [RFC PATCH 4/8] rockchip: pad u-boot-rockchip.bin correctly   Philipp Tomsich
      • [RFC PATCH 4/8] rockchip: pad u-boot-rockchip.bin correctly   Quentin Schulz
  • [RFC PATCH 5/8] rockchip: simplify binman image dependencies addition to INPUTS   Quentin Schulz
  • [RFC PATCH 6/8] rockchip: allow to build SPI images even without HAS_ROM option   Quentin Schulz
  • [RFC PATCH 7/8] binman: add support for skipping file concatenation for mkimage   Quentin Schulz
    • [RFC PATCH 7/8] binman: add support for skipping file concatenation for mkimage   Simon Glass
      • [RFC PATCH 7/8] binman: add support for skipping file concatenation for mkimage   Quentin Schulz
      • [RFC PATCH 7/8] binman: add support for skipping file concatenation for mkimage   Simon Glass
  • [RFC PATCH 8/8] rockchip: add u-boot-rockchip-spi.bin image for booting from SPI-NOR flash   Quentin Schulz
• [PATCH] defconfigs: Add a config for AM43xx HS EVM with QSPI Boot support   Andrew Davis
  • [PATCH] defconfigs: Add a config for AM43xx HS EVM with QSPI Boot support   Tom Rini
• [PATCH 1/3] defconfigs: am57xx_hs_evm: Sync HS and non-HS defconfigs   Andrew Davis
  • [PATCH 1/3] defconfigs: am57xx_hs_evm: Sync HS and non-HS defconfigs   Tom Rini
• [PATCH 2/3] defconfigs: am65x_hs_evm: Sync HS and non-HS defconfigs   Andrew Davis
  • [PATCH 2/3] defconfigs: am65x_hs_evm: Sync HS and non-HS defconfigs   Tom Rini
• [PATCH 3/3] defconfigs: j721e_hs_evm: Sync HS and non-HS defconfigs   Andrew Davis
  • [PATCH 3/3] defconfigs: j721e_hs_evm: Sync HS and non-HS defconfigs   Tom Rini
• [PATCH] arm: mach-k3: Remove ROM firewalls on GP devices   Andrew Davis
  • [PATCH] arm: mach-k3: Remove ROM firewalls on GP devices   Tom Rini
  • [PATCH] arm: mach-k3: Remove ROM firewalls on GP devices   Tom Rini
• [PATCH v2 0/5] mtd: spi: arm: rk3399: rock-pi-4: u-boot/next Support SPI NOR Flash in Rock Pi 4 (XTX xt25f32b)   Xavier Drudis Ferran
  • [PATCH v2 0/5] mtd: spi: arm: rk3399: rock-pi-4: u-boot/next Support SPI NOR Flash in Rock Pi 4 (XTX xt25f32b)   Xavier Drudis Ferran
• [PATCH v2 1/5] mtd: si: spi-nor: Add Rock pi 4b new flash chip   Xavier Drudis Ferran
• [PATCH v2 2/5] Add XTX SPI NOR 4MiB Flash chip in Rock Pi 4 boards from rev 1.4 on.   Xavier Drudis Ferran
• [PATCH v2 3/5] Adapt soft reset to other protocols in Rock Pi 4 rev 1.4   Xavier Drudis Ferran
• [PATCH v2 4/5] Allow address 0 for SPI mem operations   Xavier Drudis Ferran
• [PATCH v2 5/5] rockchip: rock-pi-4: dts: spi: Make the index of the spi flash the same in SPL and U-Boot proper   Xavier Drudis Ferran
  • [PATCH v2 5/5] rockchip: rock-pi-4: dts: spi: Make the index of the spi flash the same in SPL and U-Boot proper   Quentin Schulz
    • [PATCH v2 5/5] rockchip: rock-pi-4: dts: spi: Make the index of the spi flash the same in SPL and U-Boot proper   Michal Suchánek
    • [PATCH v2 5/5] rockchip: rock-pi-4: dts: spi: Make the index of the spi flash the same in SPL and U-Boot proper   Xavier Drudis Ferran
      • [PATCH v2 5/5] rockchip: rock-pi-4: dts: spi: Make the index of the spi flash the same in SPL and U-Boot proper   Michal Suchánek
      • [PATCH v2 5/5] rockchip: rock-pi-4: dts: spi: Make the index of the spi flash the same in SPL and U-Boot proper   Quentin Schulz
      • [PATCH v2 5/5] rockchip: rock-pi-4: dts: spi: Make the index of the spi flash the same in SPL and U-Boot proper   Michal Suchánek
      • [PATCH v2 5/5] rockchip: rock-pi-4: dts: spi: Make the index of the spi flash the same in SPL and U-Boot proper   Xavier Drudis Ferran
      • [PATCH v2 5/5] rockchip: rock-pi-4: dts: spi: Make the index of the spi flash the same in SPL and U-Boot proper   Michal Suchánek
• [PATCH 1/4] arm: mach-k3: Add support for device type detection   Andrew Davis
  • [PATCH 4/4] arm: mach-k3: security: Remove certificate if detected on GP device   Andrew Davis
    • [PATCH 4/4] arm: mach-k3: security: Remove certificate if detected on GP device   Tom Rini
  • [PATCH 1/4] arm: mach-k3: Add support for device type detection   Tom Rini
  • [PATCH 1/4] arm: mach-k3: Add support for device type detection   Tom Rini
    • [PATCH 1/4] arm: mach-k3: Add support for device type detection   Andrew Davis
• [PATCH 2/4] arm: mach-k3: security: Allow signing bypass if type is HS-FS   Andrew Davis
• [PATCH 3/4] arm: mach-k3: security: Bypass image signing at runtime for GP devices   Andrew Davis
• [PATCH 1/2] k3_gen_x509_cert: Make SWRV configurable for anti-rollback protection   Andrew Davis
  • [PATCH 2/2] arm: k3: config.mk: Read software revision information from file on HS   Andrew Davis
    • [PATCH 2/2] arm: k3: config.mk: Read software revision information from file on HS   Tom Rini
  • [PATCH 1/2] k3_gen_x509_cert: Make SWRV configurable for anti-rollback protection   Tom Rini
• [PATCH] imx8mm: Sync device tree with linux-next 20220711   Fabio Estevam
  • [PATCH] imx8mm: Sync device tree with linux-next 20220711   ZHIZHIKIN Andrey
  • [PATCH] imx8mm: Sync device tree with linux-next 20220711   sbabic at denx.de
• [PATCH] spl: Use SPL_TEXT_BASE instead of ISW_ENTRY_ADDR   Andrew Davis
  • [PATCH] spl: Use SPL_TEXT_BASE instead of ISW_ENTRY_ADDR   Tom Rini
  • [PATCH] spl: Use SPL_TEXT_BASE instead of ISW_ENTRY_ADDR   Tom Rini
• [PATCH 1/1] doc: typo 'formatted' in codingstyle.rst   Heinrich Schuchardt
  • [PATCH 1/1] doc: typo 'formatted' in codingstyle.rst   Tom Rini
• [PATCH 0/2] Xilinx AXI qspi driver enhancements   Ashok Reddy Soma
  • [PATCH 1/2] spi: xilinx_spi: Add support for spi memory operations   Ashok Reddy Soma
  • [PATCH 2/2] spi: xilinx_spi: Add support ops to axi qspi driver   Ashok Reddy Soma
  • [PATCH 0/2] Xilinx AXI qspi driver enhancements   Michal Simek
• [PATCH 1/1] gitdm: convert to Python3   Heinrich Schuchardt
  • [PATCH 1/1] gitdm: convert to Python3   Tom Rini
• [PATCH] arm: rockchip: rk3399: Program PLL clock for DDR at 50 MHz in documented range   Xavier Drudis Ferran
• DWC3 host support   Angus Ainslie
  • DWC3 host support   Angus Ainslie
  • DWC3 host support   Marek Vasut
    • DWC3 host support   Angus Ainslie
      • DWC3 host support   Marek Vasut
      • DWC3 host support   Michal Simek
      • DWC3 host support   Angus Ainslie
      • DWC3 host support   Angus Ainslie
      • DWC3 host support   Michal Simek
      • DWC3 host support   Angus Ainslie
• [PATCH 1/1] gitdm: fix typo csets   Heinrich Schuchardt
  • [PATCH 1/1] gitdm: fix typo csets   Heinrich Schuchardt
• [PATCH v2 1/1] gitdm: fix typo csets   Heinrich Schuchardt
  • [PATCH v2 1/1] gitdm: fix typo csets   Heinrich Schuchardt
• [PATCH v9 0/1] Add octal DTR support for Macronix flash   JaimeLiao
  • [PATCH v9 1/1] mtd: spi-nor-core: Add support for Macronix Octal flash   JaimeLiao
• [PATCH 2/7] spi: sunxi: refactor SPI speed/mode programming   Andre Przywara
• [bug] boot failure on pinebook pro due to rk8xx changes in 2022.07   Jan Palus
  • [bug] boot failure on pinebook pro due to rk8xx changes in 2022.07   Chris Morgan
    • [bug] boot failure on pinebook pro due to rk8xx changes in 2022.07   Michal Suchánek
• [PATCH v5 19/23] FWU: synquacer: Add FWU Multi bank update support for DeveloperBox   Jassi Brar
  • [PATCH v5 19/23] FWU: synquacer: Add FWU Multi bank update support for DeveloperBox   Ilias Apalodimas
    • [PATCH v5 19/23] FWU: synquacer: Add FWU Multi bank update support for DeveloperBox   Jassi Brar
      • [PATCH v5 19/23] FWU: synquacer: Add FWU Multi bank update support for DeveloperBox   Ilias Apalodimas
      • [PATCH v5 19/23] FWU: synquacer: Add FWU Multi bank update support for DeveloperBox   Jassi Brar
      • [PATCH v5 19/23] FWU: synquacer: Add FWU Multi bank update support for DeveloperBox   Ilias Apalodimas
      • [PATCH v5 19/23] FWU: synquacer: Add FWU Multi bank update support for DeveloperBox   Jassi Brar
      • [PATCH v5 19/23] FWU: synquacer: Add FWU Multi bank update support for DeveloperBox   Ilias Apalodimas
      • [PATCH v5 19/23] FWU: synquacer: Add FWU Multi bank update support for DeveloperBox   Tom Rini
      • [PATCH v5 19/23] FWU: synquacer: Add FWU Multi bank update support for DeveloperBox   Jassi Brar
      • [PATCH v5 19/23] FWU: synquacer: Add FWU Multi bank update support for DeveloperBox   Tom Rini
      • [PATCH v5 19/23] FWU: synquacer: Add FWU Multi bank update support for DeveloperBox   Jassi Brar
      • [PATCH v5 19/23] FWU: synquacer: Add FWU Multi bank update support for DeveloperBox   Ilias Apalodimas
      • [PATCH v5 19/23] FWU: synquacer: Add FWU Multi bank update support for DeveloperBox   Jassi Brar
      • [PATCH v5 19/23] FWU: synquacer: Add FWU Multi bank update support for DeveloperBox   Ilias Apalodimas
      • [PATCH v5 19/23] FWU: synquacer: Add FWU Multi bank update support for DeveloperBox   Jassi Brar
• [PATCH v5 20/23] FWU: synquacer: Generate dfu_alt_info from devicetree partition   Jassi Brar
  • [PATCH v5 20/23] FWU: synquacer: Generate dfu_alt_info from devicetree partition   Takahiro Akashi
    • [PATCH v5 20/23] FWU: synquacer: Generate dfu_alt_info from devicetree partition   Jassi Brar
• [PATCH] efi: test/py: repair authenticated capsules tests   Heinrich Schuchardt
• [PATCH] arm: Remove unused references to CONFIG_SOC_DM*   Tom Rini
  • [PATCH] arm: Remove unused references to CONFIG_SOC_DM*   Tom Rini
• [bug] uboot 2022.07 hangs on rpi 2 with attached usb storage   Jan Palus
  • [bug] uboot 2022.07 hangs on rpi 2 with attached usb storage   Simon Glass
    • [bug] uboot 2022.07 hangs on rpi 2 with attached usb storage   Jan Palus
      • [bug] uboot 2022.07 hangs on rpi 2 with attached usb storage   Jan Palus
      • [bug] uboot 2022.07 hangs on rpi 2 with attached usb storage   Jan Palus
      • [bug] uboot 2022.07 hangs on rpi 2 with attached usb storage   AKASHI Takahiro
      • [bug] uboot 2022.07 hangs on rpi 2 with attached usb storage   Jan Palus
    • [bug] uboot 2022.07 hangs on rpi 2 with attached usb storage   Simon Glass
      • [bug] uboot 2022.07 hangs on rpi 2 with attached usb storage   Jan Palus
• Pull request: u-boot-spi/master   Jagan Teki
  • Pull request: u-boot-spi/master   Tom Rini
• [PATCH] net: emaclite: Avoid reading negative bytes   Liao Junxuan
• binman issue on ubuntu 20.04   Belisko Marek
  • binman issue on ubuntu 20.04   Simon Glass
• [PATCH] drivers: xen: unmap Enlighten page before jumping to Linux   Julien Grall
  • [PATCH] drivers: xen: unmap Enlighten page before jumping to Linux   Dmytro Firsov
  • [PATCH] drivers: xen: unmap Enlighten page before jumping to Linux   Dmytro Firsov
  • [PATCH] drivers: xen: unmap Enlighten page before jumping to Linux   Julien Grall
    • [PATCH] drivers: xen: unmap Enlighten page before jumping to Linux   Dmytro Firsov
• [PATCH 0/9] Add DM support for atmel NAND driver   Balamanikandan Gunasundar
  • [PATCH 1/9] nand: atmel: Add DM based NAND driver   Balamanikandan Gunasundar
    • [PATCH 1/9] nand: atmel: Add DM based NAND driver   Michael Nazzareno Trimarchi
  • [PATCH 2/9] nand: atmel: Add pmecc driver   Balamanikandan Gunasundar
  • [PATCH 3/9] mfd: syscon: Add atmel-matrix registers definition   Balamanikandan Gunasundar
  • [PATCH 4/9] memory: atmel-ebi: add Atmel EBI (External Bus Interface) driver   Balamanikandan Gunasundar
  • [PATCH 5/9] mfd: syscon: atmel-smc: Add driver for atmel SMC   Balamanikandan Gunasundar
  • [PATCH 6/9] configs: at91: sam9x60ek: Enable DM based nand driver   Balamanikandan Gunasundar
  • [PATCH 7/9] ARM: dts: at91: sam9x60: Add nodes for EBI and NAND   Balamanikandan Gunasundar
  • [PATCH 8/9] ARM: dts: at91: sam9x60ek: Enable NAND support   Balamanikandan Gunasundar
  • [PATCH 9/9] board: sam9x60ek: remove nand init from board file   Balamanikandan Gunasundar
  • [PATCH 0/9] Add DM support for atmel NAND driver   Tudor.Ambarus at microchip.com
    • [PATCH 0/9] Add DM support for atmel NAND driver   Michael Nazzareno Trimarchi
      • [PATCH 0/9] Add DM support for atmel NAND driver   Michael Nazzareno Trimarchi
• [PATCH] i2c: ast_i2c: Remove SCL direct drive mode   Heiko Schocher
• Pull request: u-boot-sunxi/master for v2022.10   Andre Przywara
  • Pull request: u-boot-sunxi/master for v2022.10   Tom Rini
• [PATCH v2] drivers: xen: unmap Enlighten page before jumping to Linux   Dmytro Firsov
  • [PATCH v2] drivers: xen: unmap Enlighten page before jumping to Linux   Nastya Vicodin
  • [PATCH v2] drivers: xen: unmap Enlighten page before jumping to Linux   Oleksandr
    • [PATCH v2] drivers: xen: unmap Enlighten page before jumping to Linux   Dmytro Firsov
  • [PATCH v2] drivers: xen: unmap Enlighten page before jumping to Linux   Tom Rini
• Please pull u-boot-i2c   Heiko Schocher
  • Please pull u-boot-i2c   Tom Rini
• Reading GPIOs with DM_GPIO before device tree is loaded   Hugo Villeneuve
  • Reading GPIOs with DM_GPIO before device tree is loaded   Simon Glass
    • Reading GPIOs with DM_GPIO before device tree is loaded   Hugo Villeneuve
      • Reading GPIOs with DM_GPIO before device tree is loaded   Simon Glass
• [PATCH 1/2] tools: mkeficapsule: use pkg-config to get -luuid and -lgnutls   Heiko Thiery
  • [PATCH 2/2] tools: kwboot: use pkg-config to get -ltinfo   Heiko Thiery
    • [PATCH 2/2] tools: kwboot: use pkg-config to get -ltinfo   Pali Rohár
      • [PATCH 2/2] tools: kwboot: use pkg-config to get -ltinfo   Heiko Thiery
      • [PATCH 2/2] tools: kwboot: use pkg-config to get -ltinfo   Pali Rohár
    • [PATCH 2/2] tools: kwboot: use pkg-config to get -ltinfo   Pali Rohár
      • [PATCH 2/2] tools: kwboot: use pkg-config to get -ltinfo   Heiko Thiery
      • [PATCH 2/2] tools: kwboot: use pkg-config to get -ltinfo   Pali Rohár
  • [PATCH 1/2] tools: mkeficapsule: use pkg-config to get -luuid and -lgnutls   Pali Rohár
    • [PATCH 1/2] tools: mkeficapsule: use pkg-config to get -luuid and -lgnutls   Heiko Thiery
  • [PATCH 1/2] tools: mkeficapsule: use pkg-config to get -luuid and -lgnutls   Heinrich Schuchardt
• [PATCH v2 1/2] tools: mkeficapsule: use pkg-config to get -luuid and -lgnutls   Heiko Thiery
  • [PATCH v2 2/2] tools: kwboot: use pkg-config to get -ltinfo   Heiko Thiery
• [RFC PATCH] mtd: Fix building when CONFIG_DM is not enabled   Michael Trimarchi
• [PATCH V2 00/13] Port manufacturer specific initialization   Michael Trimarchi
  • [PATCH V2 01/13] mtd: nand: Get rid of busw parameter   Michael Trimarchi
  • [PATCH V2 02/13] mtd: nand: Store nand ID in struct nand_chip   Michael Trimarchi
  • [PATCH V2 03/13] mtd: nand: Add manufacturer specific initialization/detection steps   Michael Trimarchi
  • [PATCH V2 04/13] mtd: nand: Get rid of mtd variable in function calls   Michael Trimarchi
  • [PATCH V2 05/13] mtd: nand: Export symbol nand_decode_ext_id   Michael Trimarchi
  • [PATCH V2 06/13] mtd: nand: Move Samsung specific init/detection logic in nand_samsung.c   Michael Trimarchi
  • [PATCH V2 07/13] mtd: nand: Move Hynix specific init/detection logic in nand_hynix.c   Michael Trimarchi
  • [PATCH V2 08/13] mtd: nand: Move Toshiba specific init/detection logic in nand_toshiba.c   Michael Trimarchi
  • [PATCH V2 09/13] mtd: nand: Move Micron specific init logic in nand_micron.c   Michael Trimarchi
  • [PATCH V2 10/13] mtd: nand: Move AMD/Spansion specific init/detection logic in nand_amd.c   Michael Trimarchi
  • [PATCH V2 11/13] mtd: nand: Move Macronix specific initialization in nand_macronix.c   Michael Trimarchi
  • [PATCH V2 12/13] mtd: nand: toshiba: Retrieve ECC requirements from extended ID   Michael Trimarchi
  • [PATCH V2 13/13] mtd: decommission the NAND museum   Michael Trimarchi
• [PATCH v4] patman: By default don't pass "--no-tree" to checkpatch for linux   Douglas Anderson
  • [PATCH v4] patman: By default don't pass "--no-tree" to checkpatch for linux   Simon Glass
    • [PATCH v4] patman: By default don't pass "--no-tree" to checkpatch for linux   Simon Glass
• [PATCH] Improve Window's build documentation   Martin Bonner
  • [PATCH] Improve Window's build documentation   Bin Meng
• Please pull u-boot-ubi   Heiko Schocher
  • Please pull u-boot-ubi   Tom Rini
    • Please pull u-boot-ubi   Heiko Schocher
      • Please pull u-boot-ubi   Tom Rini
  • Please pull u-boot-ubi   Tom Rini
• [PATCH] Provide more details of exactly how configuration signatures are calculated   Martin Bonner
  • [PATCH] Provide more details of exactly how configuration signatures are calculated   Martin Bonner
    • [PATCH] Provide more details of exactly how configuration signatures are calculated   Martin Bonner
      • [PATCH] Provide more details of exactly how configuration signatures are calculated   Simon Glass
• Booting from SPI-NAND   Thomas Marangoni
• [PATCH v1] imx: romapi: fix spurious ampersand in address print   Francesco Dolcini
  • [PATCH v1] imx: romapi: fix spurious ampersand in address print   Michael Nazzareno Trimarchi
  • [PATCH v1] imx: romapi: fix spurious ampersand in address print   sbabic at denx.de
• [PATCH 0/3] Add reset driver support for ZynqMP and Versal   Ashok Reddy Soma
  • [PATCH 2/3] arm64: versal: Enable reset driver for versal   Ashok Reddy Soma
  • [PATCH 3/3] arm64: zynqmp: Enable reset driver   Ashok Reddy Soma
  • [PATCH 0/3] Add reset driver support for ZynqMP and Versal   Michal Simek
• [PATCH 1/3] reset: zynqmp: Add reset driver support for versal   Ashok Reddy Soma
• [PATCH] spi: cadence_ospi_versal: Reset ospi controller using reset driver api's   Ashok Reddy Soma
  • [PATCH] spi: cadence_ospi_versal: Reset ospi controller using reset driver api's   Soma, Ashok Reddy
• [PATCH v3 1/2] tools: mkeficapsule: use pkg-config to get -luuid and -lgnutls   Heiko Thiery
  • [PATCH v3 2/2] tools: kwboot: use pkg-config to get -ltinfo   Heiko Thiery
  • [PATCH v3 1/2] tools: mkeficapsule: use pkg-config to get -luuid and -lgnutls   AKASHI Takahiro
• [PATCH v7 0/7] tpm: rng: Move TPM RNG functionality to driver model   Sughosh Ganu
  • [PATCH v7 1/7] tpm: Export the TPM-version functions   Sughosh Ganu
    • [PATCH v7 1/7] tpm: Export the TPM-version functions   Ilias Apalodimas
  • [PATCH v7 2/7] tpm: rng: Add driver model interface for TPM RNG device   Sughosh Ganu
    • [PATCH v7 2/7] tpm: rng: Add driver model interface for TPM RNG device   Ilias Apalodimas
  • [PATCH v7 3/7] tpm: Add the RNG child device   Sughosh Ganu
    • [PATCH v7 3/7] tpm: Add the RNG child device   Ilias Apalodimas
    • [PATCH v7 3/7] tpm: Add the RNG child device   Simon Glass
      • [PATCH v7 3/7] tpm: Add the RNG child device   Ilias Apalodimas
      • [PATCH v7 3/7] tpm: Add the RNG child device   Simon Glass
  • [PATCH v7 4/7] cmd: rng: Add support for selecting RNG device   Sughosh Ganu
  • [PATCH v7 5/7] cmd: rng: Use a statically allocated array for random bytes   Sughosh Ganu
    • [PATCH v7 5/7] cmd: rng: Use a statically allocated array for random bytes   Ilias Apalodimas
      • [PATCH v7 5/7] cmd: rng: Use a statically allocated array for random bytes   Sughosh Ganu
  • [PATCH v7 6/7] doc: rng: Add documentation for the rng command   Sughosh Ganu
  • [PATCH v7 7/7] test: rng: Add a UT testcase for the rng command   Sughosh Ganu
    • [PATCH v7 7/7] test: rng: Add a UT testcase for the rng command   Ilias Apalodimas
  • [PATCH v7 0/7] tpm: rng: Move TPM RNG functionality to driver model   Ilias Apalodimas
• [PATCH 00/53] NXP-IMX pending patches   Peng Fan (OSS)
  • [PATCH 01/53] spl: imx8mm: enlarge SPL_MAX_SIZE   Peng Fan (OSS)
  • [PATCH 02/53] arm: makefile: cleanup mach-imx usage   Peng Fan (OSS)
  • [PATCH 03/53] imx: Change USB boot device type   Peng Fan (OSS)
  • [PATCH 04/53] imx: spl: Allow iMX7/8/8M to overwrite spl_board_boot_device   Peng Fan (OSS)
  • [PATCH 05/53] imx: simplify dependency with SPL_BOOTROM_SUPPORT   Peng Fan (OSS)
  • [PATCH 06/53] imx: move get_boot_device to common header   Peng Fan (OSS)
  • [PATCH 07/53] imx: move get_boot_device to common file   Peng Fan (OSS)
  • [PATCH 08/53] imx: add USB2_BOOT type   Peng Fan (OSS)
  • [PATCH 09/53] imx: add basic i.MX9 support   Peng Fan (OSS)
  • [PATCH 10/53] fsl_lpuart: add i.MX9 support   Peng Fan (OSS)
  • [PATCH 11/53] gpio: pca953x: support pcal6524   Peng Fan (OSS)
  • [PATCH 12/53] imx: pinctrl: add pinctrl and pinfunc file for i.MX93   Peng Fan (OSS)
  • [PATCH 13/53] imx: imx9: Add CCM and clock API support   Peng Fan (OSS)
  • [PATCH 14/53] mmc: fsl_esdhc_imx: Support i.MX9   Peng Fan (OSS)
  • [PATCH 15/53] spl: Use SPL_FIT_IMAGE_TINY for iMX9   Peng Fan (OSS)
  • [PATCH 16/53] imx: imx9: Add function to initialize timer   Peng Fan (OSS)
  • [PATCH 17/53] imx: imx9: disable watchdog   Peng Fan (OSS)
  • [PATCH 18/53] imx: imx9: support romapi   Peng Fan (OSS)
  • [PATCH 19/53] misc: imx: S400_API: Move S400 MU and API to a common place   Peng Fan (OSS)
  • [PATCH 20/53] misc: s4mu: Support iMX93 with Sentinel MU   Peng Fan (OSS)
  • [PATCH 21/53] misc: S400_API: Update release RDC API   Peng Fan (OSS)
  • [PATCH 22/53] misc: S400_API: New API for FW status and chip info   Peng Fan (OSS)
  • [PATCH 23/53] misc: s400_api: introduce ahab_release_m33_trout   Peng Fan (OSS)
  • [PATCH 24/53] imx: imx9: Add TRDC driver for TRDC init   Peng Fan (OSS)
  • [PATCH 25/53] imx: imx9: Add AHAB boot support   Peng Fan (OSS)
  • [PATCH 26/53] imx: imx9: Get the chip revision through S400 API   Peng Fan (OSS)
  • [PATCH 27/53] misc: S400_API: Rename imx8ulp_s400_msg to sentinel_msg   Peng Fan (OSS)
  • [PATCH 28/53] misc: imx8ulp: move fuse.c from imx8ulp to sentinel   Peng Fan (OSS)
  • [PATCH 29/53] misc: fuse: support to access fuse on i.MX93   Peng Fan (OSS)
  • [PATCH 30/53] misc: fuse: update the code for accessing fuse of i.MX93   Peng Fan (OSS)
  • [PATCH 31/53] imx: imx9: Add gpio registers structure   Peng Fan (OSS)
  • [PATCH 32/53] imx: imx9: Add MIX power init   Peng Fan (OSS)
  • [PATCH 33/53] imx: imx9: Add M33 release prepare function   Peng Fan (OSS)
  • [PATCH 34/53] imx: imx9: Support booting m33 from Acore   Peng Fan (OSS)
  • [PATCH 35/53] imx: imx9: Support multiple env storages at runtime   Peng Fan (OSS)
  • [PATCH 36/53] imx: imx9: clock: Add DDR clock support   Peng Fan (OSS)
  • [PATCH 37/53] ddr: imx: Add i.MX9 DDR controller driver   Peng Fan (OSS)
  • [PATCH 38/53] ddr: imx9: enable Performance monitor counter   Peng Fan (OSS)
  • [PATCH 39/53] arm: dts: Add i.MX93 SoC DTSi file   Peng Fan (OSS)
  • [PATCH 40/53] imx: imx93_evk: Add basic board support   Peng Fan (OSS)
  • [PATCH 41/53] imx: imx93_evk: Set ARM clock to 1.7Ghz   Peng Fan (OSS)
  • [PATCH 43/53] net: dwc_eth_qos: fix build break when CLK not enabled   Peng Fan (OSS)
  • [PATCH 44/53] net: dwc_eth_qos: public some functions   Peng Fan (OSS)
  • [PATCH 45/53] net: dwc_eth_qos: move i.MX code out   Peng Fan (OSS)
  • [PATCH 46/53] net: eqos: add function to get phy node and address   Peng Fan (OSS)
  • [PATCH 48/53] board: freescale: imx93_evk: support ethernet   Peng Fan (OSS)
  • [PATCH 49/53] tools: image: support i.MX93   Peng Fan (OSS)
  • [PATCH 51/53] ddr: imx8m: helper: load ddr firmware according to binman symbols   Peng Fan (OSS)
  • [PATCH 52/53] arm: dts: imx8m: shrink ddr firmware size to actual file size   Peng Fan (OSS)
  • [PATCH 53/53] imx: imx8mm-icore: migrate to use BINMAN   Peng Fan (OSS)
  • [PATCH 00/53] NXP-IMX pending patches   Stefano Babic
• Error: unrecognized opcode on riscv64   Alex
• [PATCH v3 0/3] Support various block interfaces for avb and bcb   Andrii Chepurnyi
• [PATCH v3 1/3] cmd: bcb: introduce optional interface parameter to bcb   Andrii Chepurnyi
  • [PATCH v3 1/3] cmd: bcb: introduce optional interface parameter to bcb   Igor Opaniuk
• [PATCH v3 2/3] cmd: avb: introduce optional interface parameter to avb init   Andrii Chepurnyi
  • [PATCH v3 2/3] cmd: avb: introduce optional interface parameter to avb init   Igor Opaniuk
• [PATCH v3 3/3] cmd: avb: remove mmc naming from generic block code   Andrii Chepurnyi
  • [PATCH v3 3/3] cmd: avb: remove mmc naming from generic block code   Igor Opaniuk
• [PATCH v2] Improve Windows build documentation   Martin Bonner
  • [PATCH v2] Improve Windows build documentation   Bin Meng
• [PATCH v3 0/4] mtd: spi: spi-nor: rk3399: rock-pi-4: u-boot/next Support SPI NOR Flash in Rock Pi 4 (XTX xt25f32b)   Xavier Drudis Ferran
  • [PATCH v3 0/4] mtd: spi: spi-nor: rk3399: rock-pi-4: u-boot/next Support SPI NOR Flash in Rock Pi 4 (XTX xt25f32b)   Xavier Drudis Ferran
    • [PATCH v3 1/4] mtd: spi: spi-nor: Add Rock pi 4b new flash chip   Xavier Drudis Ferran
    • [PATCH v3 2/4] rockchip: rk-3399: rock-pi-4: dts: Add XTX SPI NOR 4MiB Flash chip in Rock Pi 4 boards from rev 1.4 on.   Xavier Drudis Ferran
    • [PATCH v3 3/4] spi-nor: Adapt soft reset to XTX25F32B in Rock Pi 4 rev 1.4   Xavier Drudis Ferran
      • [PATCH v3 3/4] spi-nor: Adapt soft reset to XTX25F32B in Rock Pi 4 rev 1.4   Pratyush Yadav
      • [PATCH v3 3/4] spi-nor: Adapt soft reset to XTX25F32B in Rock Pi 4 rev 1.4   Xavier Drudis Ferran
      • [PATCH v3 3/4] spi-nor: Adapt soft reset to XTX25F32B in Rock Pi 4 rev 1.4   Pratyush Yadav
      • [SPAM] Re: [PATCH v3 3/4] spi-nor: Adapt soft reset to XTX25F32B in Rock Pi 4 rev 1.4   Xavier Drudis Ferran
    • [PATCH v3 4/4] spi: spi-mem: Allow address 0 for SPI mem operations   Xavier Drudis Ferran
• [PATCH v3 01/13] mtd: nand: Get rid of busw parameter   Dario Binacchi
• [PATCH 00/19] vbe: Verified Boot for Embedded initial support   Simon Glass
  • [PATCH 01/19] video: Renname vbe.h to vesa.h   Simon Glass
    • [PATCH 01/19] video: Renname vbe.h to vesa.h   Bin Meng
      • [PATCH 01/19] video: Renname vbe.h to vesa.h   Simon Glass
      • [PATCH 01/19] video: Renname vbe.h to vesa.h   Bin Meng
  • [PATCH 02/19] video: Rename structs and functions to avoid VBE   Simon Glass
  • [PATCH 03/19] dm: core: Split out the declaration of ofnode   Simon Glass
  • [PATCH 04/19] ofnode: Add a note about how livetree updates work   Simon Glass
  • [PATCH 05/19] ofnode: Introduce support for multiple trees   Simon Glass
  • [PATCH 06/19] dm: core: Move ofnode-writing test to ofnode   Simon Glass
  • [PATCH 07/19] dm: core: Swap parameters of ofnode_write_prop()   Simon Glass
  • [PATCH 08/19] dm: core: Tidy up ofnode-writing test   Simon Glass
  • [PATCH 09/19] dm: core: Prepare for updating the device tree with ofnode   Simon Glass
  • [PATCH 10/19] ofnode: Allow writing to a flat tree   Simon Glass
  • [PATCH 11/19] dm: core: Add support for writing u32 with ofnode   Simon Glass
  • [PATCH 12/19] event: Add an event for device tree fixups   Simon Glass
  • [PATCH 13/19] read: Support sandbox   Simon Glass
  • [PATCH 14/19] bootstd: Fix comment in bootmeth test   Simon Glass
  • [PATCH 15/19] bootstd: Detect empty bootmeth ordering   Simon Glass
  • [PATCH 16/19] bootstd: Provide a bootmeth method to obtain state info   Simon Glass
  • [PATCH 17/19] vbe: Add initial support for VBE   Simon Glass
  • [PATCH 18/19] vbe: Support VBE simple   Simon Glass
  • [PATCH 19/19] vbe: Add a new vbe command   Simon Glass
• u-boot 2022.04 for MCIMX6S7 board (TS-7970)   DataSelfService Srl
  • Fwd: u-boot 2022.04 for MCIMX6S7 board (TS-7970)   DataSelfService Srl
• How to create a bootable SPL for USB booting for the i.MX8M Mini   Patrick Boettcher
• MVEBU A38x Regulator   Tony Dinh
  • MVEBU A38x Regulator   Pali Rohár
    • MVEBU A38x Regulator   Tony Dinh
      • MVEBU A38x Regulator   Pali Rohár
    • MVEBU A38x Regulator   Pali Rohár
      • MVEBU A38x Regulator   Tony Dinh
      • MVEBU A38x Regulator   Tony Dinh
      • MVEBU A38x Regulator   Pali Rohár
• [RFCv1] CI: Move to Ubuntu 2022.04 "Jammy" for CI base   Tom Rini
• [PATCH v3 00/13] Port manufacturer specific initialization   Dario Binacchi
  • [PATCH v3 01/13] mtd: nand: Get rid of busw parameter   Dario Binacchi
  • [PATCH v3 02/13] mtd: nand: Store nand ID in struct nand_chip   Dario Binacchi
  • [PATCH v3 03/13] mtd: nand: Add manufacturer specific initialization/detection steps   Dario Binacchi
  • [PATCH v3 04/13] mtd: nand: Get rid of mtd variable in function calls   Dario Binacchi
  • [PATCH v3 05/13] mtd: nand: Export symbol nand_decode_ext_id   Dario Binacchi
  • [PATCH v3 06/13] mtd: nand: Move Samsung specific init/detection logic in nand_samsung.c   Dario Binacchi
  • [PATCH v3 07/13] mtd: nand: Move Hynix specific init/detection logic in nand_hynix.c   Dario Binacchi
  • [PATCH v3 08/13] mtd: nand: Move Toshiba specific init/detection logic in nand_toshiba.c   Dario Binacchi
  • [PATCH v3 09/13] mtd: nand: Move Micron specific init logic in nand_micron.c   Dario Binacchi
  • [PATCH v3 10/13] mtd: nand: Move AMD/Spansion specific init/detection logic in nand_amd.c   Dario Binacchi
  • [PATCH v3 11/13] mtd: nand: Move Macronix specific initialization in nand_macronix.c   Dario Binacchi
  • [PATCH v3 12/13] mtd: nand: toshiba: Retrieve ECC requirements from extended ID   Dario Binacchi
  • [PATCH v3 13/13] mtd: decommission the NAND museum   Dario Binacchi
  • [PATCH v3 00/13] Port manufacturer specific initialization   Michael Nazzareno Trimarchi
• [PATCH] imx: syscounter: support timer_get_boot_us   Jun Nie
  • [PATCH] imx: syscounter: support timer_get_boot_us   Shawn Guo
  • [PATCH] imx: syscounter: support timer_get_boot_us   Fabio Estevam
  • [PATCH] imx: syscounter: support timer_get_boot_us   sbabic at denx.de
• Increasing stabilization time in sunxi_mmc_core_init   Andre Przywara
  • Increasing stabilization time in sunxi_mmc_core_init   Jernej Škrabec
    • Increasing stabilization time in sunxi_mmc_core_init   Da Xue
    • Increasing stabilization time in sunxi_mmc_core_init   Jernej Škrabec
      • Increasing stabilization time in sunxi_mmc_core_init   Da Xue
      • Increasing stabilization time in sunxi_mmc_core_init   Jernej Škrabec
      • Increasing stabilization time in sunxi_mmc_core_init   Da Xue
      • Increasing stabilization time in sunxi_mmc_core_init   Da Xue
  • Increasing stabilization time in sunxi_mmc_core_init   Jernej Škrabec
• [PATCH] board: turris: Find atsha device by atsha driver   Stefan Roese
• [PATCH] arm64: mvebu: handle non-zero base address for RAM   Stefan Roese
• [PATCH v5 1/3] arm: mvebu: dts: sync DTS   Stefan Roese
• [PATCH v5 2/3] arm: mvebu: add support for Methode eDPU   Stefan Roese
• [PATCH v5 3/3] MAINTAINERS: add myself as Methode maintainer   Stefan Roese
• [PATCH 1/2] arm: mvebu: a3720: Set BOOT_TARGET_DEVICES list to enabled peripherals   Stefan Roese
• [PATCH 2/2] arm: mvebu: a3720: Add NVMe to BOOT_TARGET_DEVICES list   Stefan Roese
• [PATCH] arch: mvebu: Disable by default unused peripherals in SPL   Stefan Roese
• [PATCH] tlv_eeprom: Add missing CRC32 dependency   Stefan Roese
• [PATCH u-boot-marvell 1/2] board: turris: Fix MAINTAINERS and add Pali   Stefan Roese
• [PATCH u-boot-marvell 2/2] treewide: Fix Marek's name and change my e-mail address   Stefan Roese
• [PATCH 1/2] mvebu: eDPU: disable SCSI support   Stefan Roese
• [PATCH 2/2] mvebu: uDPU: disable non-present peripherals   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
  • Please pull u-boot-marvell/master   Tom Rini
  • Please pull u-boot-marvell/master   Stefan Roese
    • Please pull u-boot-marvell/master   Tom Rini
• [PATCH v1 0/8] board: toradex: Refactor config block handling and cleanup   Francesco Dolcini
  • [PATCH v1 4/8] toradex: tdx-cfg-block: Cleanup interactive cfg block creation   Francesco Dolcini
    • [PATCH v1 4/8] toradex: tdx-cfg-block: Cleanup interactive cfg block creation   sbabic at denx.de
  • [PATCH v1 5/8] toradex: common: Remove stale function declaration   Francesco Dolcini
    • [PATCH v1 5/8] toradex: common: Remove stale function declaration   sbabic at denx.de
  • [PATCH v1 6/8] toradex: common: Remove #ifdef usage for 2nd ethaddr   Francesco Dolcini
    • [PATCH v1 6/8] toradex: common: Remove #ifdef usage for 2nd ethaddr   sbabic at denx.de
  • [PATCH v1 7/8] toradex: tdx-cfg-block: Use official SKU names   Francesco Dolcini
    • [PATCH v1 7/8] toradex: tdx-cfg-block: Use official SKU names   sbabic at denx.de
  • [PATCH v1 8/8] toradex: common: Improve product/serial print during boot   Francesco Dolcini
    • [PATCH v1 8/8] toradex: common: Improve product/serial print during boot   sbabic at denx.de
  • [PATCH v1 0/8] board: toradex: Refactor config block handling and cleanup   Marcel Ziswiler
    • [PATCH v1 0/8] board: toradex: Refactor config block handling and cleanup   Francesco Dolcini
      • [PATCH v1 0/8] board: toradex: Refactor config block handling and cleanup   Tom Rini
• [PATCH v1 1/8] toradex: tdx-cfg-block: add 0068 i.mx 8m mini sku   Francesco Dolcini
  • [PATCH v1 1/8] toradex: tdx-cfg-block: add 0068 i.mx 8m mini sku   sbabic at denx.de
• [PATCH v1 2/8] toradex: common: Remove stale comments about modules availability   Francesco Dolcini
  • [PATCH v1 2/8] toradex: common: Remove stale comments about modules availability   sbabic at denx.de
• [PATCH v1 3/8] toradex: common: Use ARRAY_SIZE macro   Francesco Dolcini
  • [PATCH v1 3/8] toradex: common: Use ARRAY_SIZE macro   sbabic at denx.de
• [PATCH 1/5] imx8m: USDHC3 base address definition for i.MX8MP   Martyn Welch
  • [PATCH 2/5] ARM: imx: imx8mp: Enable support for i2c5 and i2c6 on i.MX8MP   Martyn Welch
  • [PATCH 3/5] drivers: power: pmic: Add support for rn5t568 PMIC   Martyn Welch
  • [PATCH 4/5] drivers: power: pmic: Add legacy support for rn5t567 PMIC   Martyn Welch
  • [PATCH 5/5] arm: imx8mp: Initial MSC SM2S iMX8MP support   Martyn Welch
• [PATCH v1 00/26] arm: dts: imx: sync device trees with upstream linux kernel ones   Marcel Ziswiler
  • [PATCH v1 04/26] imx6dl/imx6qdl: synchronise device trees with linux   Marcel Ziswiler
    • [PATCH v1 04/26] imx6dl/imx6qdl: synchronise device trees with linux   sbabic at denx.de
  • [PATCH v1 20/26] imx8mm-mx8menlo/verdin-imx8mm: synchronise device tree with linux   Marcel Ziswiler
    • [PATCH v1 20/26] imx8mm-mx8menlo/verdin-imx8mm: synchronise device tree with linux   sbabic at denx.de
  • [PATCH v1 21/26] imx8mn: synchronise device tree with linux   Marcel Ziswiler
    • [PATCH v1 21/26] imx8mn: synchronise device tree with linux   sbabic at denx.de
    • [PATCH v1 21/26] imx8mn: synchronise device tree with linux   Adam Ford
  • [PATCH v1 22/26] imx8mp: synchronise device tree with linux   Marcel Ziswiler
    • [PATCH v1 22/26] imx8mp: synchronise device tree with linux   sbabic at denx.de
  • [PATCH v1 23/26] imx8mp-rsb3720-a1: fix pwms property warnings   Marcel Ziswiler
    • [PATCH v1 23/26] imx8mp-rsb3720-a1: fix pwms property warnings   sbabic at denx.de
  • [PATCH v1 24/26] verdin-imx8mp: synchronise device tree with linux   Marcel Ziswiler
    • [PATCH v1 24/26] verdin-imx8mp: synchronise device tree with linux   sbabic at denx.de
  • [PATCH v1 25/26] imx8mq: synchronise device tree with linux   Marcel Ziswiler
    • [PATCH v1 25/26] imx8mq: synchronise device tree with linux   sbabic at denx.de
  • [PATCH v1 26/26] board: toradex: apalis-imx8: fix file names in maintainers   Marcel Ziswiler
    • [PATCH v1 26/26] board: toradex: apalis-imx8: fix file names in maintainers   sbabic at denx.de
• [PATCH v1 01/26] board/BuR/brppt2: fix pwms property warning   Marcel Ziswiler
  • [PATCH v1 01/26] board/BuR/brppt2: fix pwms property warning   sbabic at denx.de
• [PATCH v1 02/26] imx6: aristainetos: fix pwms property warnings   Marcel Ziswiler
  • [PATCH v1 02/26] imx6: aristainetos: fix pwms property warnings   Heiko Schocher
  • [PATCH v1 02/26] imx6: aristainetos: fix pwms property warnings   sbabic at denx.de
• [PATCH v1 03/26] tbs2910: prepare to synchronise device trees with linux   Marcel Ziswiler
  • [PATCH v1 03/26] tbs2910: prepare to synchronise device trees with linux   Soeren Moch
    • [PATCH v1 03/26] tbs2910: prepare to synchronise device trees with linux   Marcel Ziswiler
      • [PATCH v1 03/26] tbs2910: prepare to synchronise device trees with linux   Fabio Estevam
  • [PATCH v1 03/26] tbs2910: prepare to synchronise device trees with linux   sbabic at denx.de
    • [PATCH v1 03/26] tbs2910: prepare to synchronise device trees with linux   Soeren Moch
• [PATCH v1 05/26] apalis_imx6: synchronise device tree with linux   Marcel Ziswiler
  • [PATCH v1 05/26] apalis_imx6: synchronise device tree with linux   sbabic at denx.de
• [PATCH v1 06/26] colibri_imx6: synchronise device tree with linux   Marcel Ziswiler
  • [PATCH v1 06/26] colibri_imx6: synchronise device tree with linux   sbabic at denx.de
• [PATCH v1 07/26] imx: mx6ul_14x14_evk: prepare to synchronise device trees with linux   Marcel Ziswiler
  • [PATCH v1 07/26] imx: mx6ul_14x14_evk: prepare to synchronise device trees with linux   sbabic at denx.de
• [PATCH v1 08/26] imx6ul/imx6ull: synchronise device trees with linux   Marcel Ziswiler
  • [PATCH v1 08/26] imx6ul/imx6ull: synchronise device trees with linux   sbabic at denx.de
• [PATCH v1 09/26] colibri-imx6ull/-emmc: synchronise device tree with linux   Marcel Ziswiler
  • [PATCH v1 09/26] colibri-imx6ull/-emmc: synchronise device tree with linux   sbabic at denx.de
• [PATCH v1 10/26] imx: imx7-cm: prepare to synchronise device trees with linux   Marcel Ziswiler
  • [PATCH v1 10/26] imx: imx7-cm: prepare to synchronise device trees with linux   sbabic at denx.de
• [PATCH v1 11/26] imx: imx7d-sdb: prepare to synchronise device trees with linux   Marcel Ziswiler
  • [PATCH v1 11/26] imx: imx7d-sdb: prepare to synchronise device trees with linux   sbabic at denx.de
• [PATCH v1 12/26] imx7s/d: synchronise device trees with linux   Marcel Ziswiler
  • [PATCH v1 12/26] imx7s/d: synchronise device trees with linux   sbabic at denx.de
• [PATCH v1 13/26] colibri-imx7d/-emmc: synchronise device tree with linux   Marcel Ziswiler
  • [PATCH v1 13/26] colibri-imx7d/-emmc: synchronise device tree with linux   sbabic at denx.de
• [PATCH v1 14/26] ARM: DTS: bk4r1/pcm052: prepare to synchronise device trees with linux   Marcel Ziswiler
  • [PATCH v1 14/26] ARM: DTS: bk4r1/pcm052: prepare to synchronise device trees with linux   sbabic at denx.de
• [PATCH v1 15/26] vf500/vf610: synchronise device trees with linux   Marcel Ziswiler
  • [PATCH v1 15/26] vf500/vf610: synchronise device trees with linux   sbabic at denx.de
• [PATCH v1 16/26] colibri_vf: synchronise device tree with linux   Marcel Ziswiler
  • [PATCH v1 16/26] colibri_vf: synchronise device tree with linux   sbabic at denx.de
• [PATCH v1 17/26] imx8mm-venice-gw700x: prepare to synchronise device trees with linux   Marcel Ziswiler
  • [PATCH v1 17/26] imx8mm-venice-gw700x: prepare to synchronise device trees with linux   sbabic at denx.de
• [PATCH v1 18/26] imx8mm: synchronise device tree with linux   Marcel Ziswiler
  • [PATCH v1 18/26] imx8mm: synchronise device tree with linux   sbabic at denx.de
• [PATCH v1 19/26] imx8mm-kontron-n801x-s-lvds: fix pwms property warnings   Marcel Ziswiler
  • [PATCH v1 19/26] imx8mm-kontron-n801x-s-lvds: fix pwms property warnings   sbabic at denx.de
• [PATCH v3 0/2] fpga: Convert some options to Kconfig   Alexander Dahl
  • [PATCH v3 2/2] fpga: Convert SYS_FPGA_PROG_FEEDBACK to Kconfig   Alexander Dahl
  • [PATCH v3 0/2] fpga: Convert some options to Kconfig   Michal Simek
• [PATCH v3 1/2] fpga: Convert SYS_FPGA_CHECK_CTRLC to Kconfig   Alexander Dahl
• [PATCH] MAINTAINERS: Update file list for ARM Freescale IMX   Martyn Welch
  • [PATCH] MAINTAINERS: Update file list for ARM Freescale IMX   sbabic at denx.de
• [PATCH] fastboot: release usb_gadget on reboot commands   Mattijs Korpershoek
  • [PATCH] fastboot: release usb_gadget on reboot commands   Marek Vasut
    • [PATCH] fastboot: release usb_gadget on reboot commands   Mattijs Korpershoek
      • [PATCH] fastboot: release usb_gadget on reboot commands   Marek Vasut
      • [PATCH] fastboot: release usb_gadget on reboot commands   Mattijs Korpershoek
      • [PATCH] fastboot: release usb_gadget on reboot commands   Marek Vasut
      • [PATCH] fastboot: release usb_gadget on reboot commands   Mattijs Korpershoek
• [PATCH 1/2] xilinx: Wire uuid reading from FRU   Michal Simek
  • [PATCH 2/2] xilinx: common: Use strlcpy instead of strncpy   Michal Simek
  • [PATCH 1/2] xilinx: Wire uuid reading from FRU   Michal Simek
• Please pull u-boot-watchdog/master   Stefan Roese
  • Please pull u-boot-watchdog/master   Tom Rini
• [PATCH v2] watchdog: add amlogic watchdog support   Stefan Roese
• [PATCH] boot: allow bootmeth-distro without CONFIG_NET   John Keeping
  • [PATCH] boot: allow bootmeth-distro without CONFIG_NET   Simon Glass
• [PATCH] tools: mkimage: don't use deprecated openssl funcs   Michal Vasilek
  • [PATCH] tools: mkimage: don't use deprecated openssl funcs   Simon Glass
    • [PATCH v2] tools: mkimage: fix build with LibreSSL   Michal Vasilek
      • [PATCH] tools: mkimage: fix build with LibreSSL   Michal Vasilek
      • [PATCH] tools: mkimage: fix build with LibreSSL   Simon Glass
      • [PATCH] tools: mkimage: fix build with LibreSSL   Jonathan Gray
• [PATCH 1/1] usb: storage: stop probe on "Invalid device"   Janne Grunau
• [PATCH] sunxi-mmc: increase stabilization delay from 1ms to 20ms   Da Xue
  • [PATCH] sunxi-mmc: increase stabilization delay from 1ms to 20ms   Andre Przywara
    • [PATCH] sunxi-mmc: increase stabilization delay from 1ms to 20ms   Jernej Škrabec
      • [PATCH] sunxi-mmc: increase stabilization delay from 1ms to 20ms   Da Xue
• [PATCH v10 00/10] enable menu-driven UEFI variable maintenance   Masahisa Kojima
  • [PATCH v10 01/10] efi_loader: move udevice pointer into struct efi_object   Masahisa Kojima
  • [PATCH v10 02/10] eficonfig: menu-driven addition of UEFI boot option   Masahisa Kojima
  • [PATCH v10 03/10] eficonfig: add "Edit Boot Option" menu entry   Masahisa Kojima
  • [PATCH v10 04/10] menu: add KEY_PLUS and KEY_MINUS handling   Masahisa Kojima
  • [PATCH v10 05/10] eficonfig: add "Change Boot Order" menu entry   Masahisa Kojima
  • [PATCH v10 06/10] eficonfig: add "Delete Boot Option" menu entry   Masahisa Kojima
  • [PATCH v10 07/10] bootmenu: add removable media entries   Masahisa Kojima
  • [PATCH v10 08/10] doc:bootmenu: add description for UEFI boot support   Masahisa Kojima
  • [PATCH v10 09/10] doc:eficonfig: add documentation for eficonfig command   Masahisa Kojima
  • [PATCH v10 10/10] test: unit test for eficonfig   Masahisa Kojima
  • [PATCH v10 00/10] enable menu-driven UEFI variable maintenance   Ilias Apalodimas
    • [PATCH v10 00/10] enable menu-driven UEFI variable maintenance   Takahiro Akashi
      • [PATCH v10 00/10] enable menu-driven UEFI variable maintenance   Takahiro Akashi
• [PATCH v2 0/4] Deduplicate dhelectronics board files   Philip Oberfichtner
  • [PATCH v2 1/4] board: dhelectronics: Implement common MAC address functions   Philip Oberfichtner
  • [PATCH v2 2/4] ARM: imx6: DH: Use common MAC address functions   Philip Oberfichtner
  • [PATCH v2 3/4] ARM: imx8: DH: Use common MAC address functions   Philip Oberfichtner
  • [PATCH v2 4/4] ARM: stm32: DH: Use common MAC address functions   Philip Oberfichtner
  • [PATCH v2 0/4] Deduplicate dhelectronics board files   Marek Vasut
• [PATCH v2 0/5] Enable power domain driver in ZynqMP and Versal   Ashok Reddy Soma
  • [PATCH v2 1/5] firmware: zynqmp: Change prototype of zynqmp_pmufw_load_config_object()   Ashok Reddy Soma
  • [PATCH v2 2/5] firmware: zynqmp: Load config overlay for core0 to pmufw   Ashok Reddy Soma
  • [PATCH v2 3/5] arm64: zynqmp: Enable power domain driver   Ashok Reddy Soma
  • [PATCH v2 4/5] mailbox: zynqmp: Move struct zynqmp_ipi_msg from sys_proto.h   Ashok Reddy Soma
  • [PATCH v2 5/5] arm64: versal: Enable power domain driver and its dependencies   Ashok Reddy Soma
  • [PATCH v2 0/5] Enable power domain driver in ZynqMP and Versal   Michal Simek
• [PATCH v3 1/2] rockchip: rk3399: fix incorrect ifdef check on SPL_DM_REGULATOR   Quentin Schulz
  • [PATCH v3 2/2] rockchip: rk3399: fix incorrect ifdef check on SPL_GPIO   Quentin Schulz
• [PATCH v2 1/2] spl: enable regulator-boot-on and disable regulator-force-boot-off   Quentin Schulz
  • [PATCH v2 2/2] rockchip: rk3399: remove duplicate call to regulators_enable_boot_on   Quentin Schulz
• [PATCH v2 0/7] migrate u-boot-rockchip.bin to binman and generate an image for SPI   Quentin Schulz
  • [PATCH v2 1/7] rockchip: generate idbloader.img content for u-boot-rockchip.bin with binman for ARM   Quentin Schulz
    • [PATCH v2 1/7] rockchip: generate idbloader.img content for u-boot-rockchip.bin with binman for ARM   Johan Jonker
      • [PATCH v2 1/7] rockchip: generate idbloader.img content for u-boot-rockchip.bin with binman for ARM   Matwey V. Kornilov
      • [SPAM] Re: [PATCH v2 1/7] rockchip: generate idbloader.img content for u-boot-rockchip.bin with binman for ARM   Xavier Drudis Ferran
      • [PATCH v2 1/7] rockchip: generate idbloader.img content for u-boot-rockchip.bin with binman for ARM   Quentin Schulz
      • [PATCH v2 1/7] rockchip: generate idbloader.img content for u-boot-rockchip.bin with binman for ARM   Xavier Drudis Ferran
      • [PATCH v2 1/7] rockchip: generate idbloader.img content for u-boot-rockchip.bin with binman for ARM   Johan Jonker
    • [PATCH v2 1/7] rockchip: generate idbloader.img content for u-boot-rockchip.bin with binman for ARM   Jagan Teki
  • [PATCH v2 2/7] rockchip: generate u-boot-rockchip.bin with binman for ARM64 boards   Quentin Schulz
  • [PATCH v2 3/7] rockchip: remove unneeded CONFIG_SPL_PAD_TO   Quentin Schulz
  • [PATCH v2 4/7] rockchip: simplify binman image dependencies addition to INPUTS   Quentin Schulz
  • [PATCH v2 5/7] rockchip: allow to build SPI images even without HAS_ROM option   Quentin Schulz
  • [PATCH v2 6/7] binman: add support for skipping file concatenation for mkimage   Quentin Schulz
  • [PATCH v2 7/7] rockchip: add u-boot-rockchip-spi.bin image for booting from SPI-NOR flash   Quentin Schulz
  • [SPAM] [PATCH v2 0/7] migrate u-boot-rockchip.bin to binman and generate an image for SPI   Xavier Drudis Ferran
    • [SPAM] [PATCH v2 0/7] migrate u-boot-rockchip.bin to binman and generate an image for SPI   Quentin Schulz
      • [SPAM] [PATCH v2 0/7] migrate u-boot-rockchip.bin to binman and generate an image for SPI   Xavier Drudis Ferran
      • [SPAM] [PATCH v2 0/7] migrate u-boot-rockchip.bin to binman and generate an image for SPI   Quentin Schulz
• [PATCH v12 00/13] fpga: zynqmp: Adding support of loading authenticated images   Oleksandr Suvorov
  • [PATCH v12 01/13] fpga: add option for loading FPGA secure bitstreams   Oleksandr Suvorov
    • [PATCH v12 02/13] fpga: xilinx: add missed identifier names   Oleksandr Suvorov
      • [PATCH v12 03/13] fpga: xilinx: add bitstream flags to driver desc   Oleksandr Suvorov
      • [PATCH v12 04/13] fpga: zynqmp: add str2flags call   Oleksandr Suvorov
      • [PATCH v12 05/13] fpga: xilinx: pass compatible flags to xilinx_load()   Oleksandr Suvorov
      • [PATCH v12 06/13] fpga: pass compatible flags to fpga_load()   Oleksandr Suvorov
      • [PATCH v12 07/13] fpga: add fpga_compatible2flag   Oleksandr Suvorov
      • [PATCH v12 08/13] spl: fit: pass real compatible flags to fpga_load()   Oleksandr Suvorov
      • [PATCH v12 09/13] fpga: xilinx: pass compatible flags to load() callback   Oleksandr Suvorov
      • [PATCH v12 10/13] fpga: zynqmp: reduce zynqmppl_load() code   Oleksandr Suvorov
      • [PATCH v12 11/13] fpga: zynqmp: add bitstream compatible checking   Oleksandr Suvorov
      • [PATCH v12 12/13] fpga: zynqmp: support loading authenticated images   Oleksandr Suvorov
      • [PATCH v12 13/13] fpga: zynqmp: support loading encrypted bitfiles   Oleksandr Suvorov
      • [PATCH v12 12/13] fpga: zynqmp: support loading authenticated images   Michal Simek
  • [PATCH v12 00/13] fpga: zynqmp: Adding support of loading authenticated images   Michal Simek
• [PATCH] video: dw_mipi_dsi: fix vsync active vs back porch   John Keeping
• [PATCH v8 0/8] tpm: rng: Move TPM RNG functionality to driver model   Sughosh Ganu
  • [PATCH v8 1/8] tpm: Export the TPM-version functions   Sughosh Ganu
  • [PATCH v8 2/8] efi_loader: initialize the RNG protocol after the TCC2   Sughosh Ganu
  • [PATCH v8 3/8] tpm: rng: Add driver model interface for TPM RNG device   Sughosh Ganu
  • [PATCH v8 4/8] tpm: Add the RNG child device   Sughosh Ganu
  • [PATCH v8 5/8] cmd: rng: Add support for selecting RNG device   Sughosh Ganu
  • [PATCH v8 6/8] cmd: rng: Use a statically allocated array for random bytes   Sughosh Ganu
  • [PATCH v8 7/8] doc: rng: Add documentation for the rng command   Sughosh Ganu
  • [PATCH v8 8/8] test: rng: Add a UT testcase for the rng command   Sughosh Ganu
• [PATCH 00/12] Puma RK3399 migration to TPL and numerous fixes   Quentin Schulz
  • [PATCH 01/12] rockchip: puma-rk3399: fix boot_targets swap depending on U-Boot proper load medium   Quentin Schulz
  • [PATCH 02/12] rockchip: puma-rk3399: use gpio-hog instead of fixed-regulator for enabling eMMC/SPI-NOR   Quentin Schulz
  • [PATCH 03/12] rockchip: puma-rk3399: allow non-SD-Card-loaded SPL to load U-Boot proper from SD-Card   Quentin Schulz
  • [PATCH 04/12] rockchip: puma-rk3399: remove unused default ENV_OFFSET for SPI flashes   Quentin Schulz
  • [PATCH 05/12] rockchip: puma-rk3399: load environment from same MMC as used for loading U-Boot proper   Quentin Schulz
  • [PATCH 06/12] rockchip: puma-rk3399: allow loading environment from SPI-NOR flash   Quentin Schulz
  • [PATCH 07/12] rockchip: puma-rk3399: load environment from same medium as one used to load U-Boot proper   Quentin Schulz
  • [PATCH 08/12] rockchip: puma-rk3399: remove useless CONFIG_SYS_SPI_U_BOOT_OFFS   Quentin Schulz
  • [PATCH 09/12] rockchip: puma-rk3399: migrate to TPL   Quentin Schulz
  • [PATCH 10/12] rockchip: puma-rk3399: migrate to u-boot-rockchip.bin   Quentin Schulz
  • [PATCH 11/12] rockchip: lion-rk3368: migrate to u-boot-rockchip.bin   Quentin Schulz
  • [PATCH 12/12] rockchip: puma-rk3399: migrate to u-boot-rockchip-spi.bin   Quentin Schulz
• [PATCH v4 00/14] Port manufacturer specific initialization   Dario Binacchi
  • [PATCH v4 01/14] mtd: nand: Get rid of busw parameter   Dario Binacchi
  • [PATCH v4 02/14] mtd: nand: Store nand ID in struct nand_chip   Dario Binacchi
  • [PATCH v4 03/14] mtd: nand: Add manufacturer specific initialization/detection steps   Dario Binacchi
  • [PATCH v4 04/14] mtd: nand: Get rid of mtd variable in function calls   Dario Binacchi
  • [PATCH v4 05/14] mtd: nand: Fix MediaTek MT7621 SoC build   Dario Binacchi
    • [PATCH v4 05/14] mtd: nand: Fix MediaTek MT7621 SoC build   Weijie Gao
  • [PATCH v4 06/14] mtd: nand: Export symbol nand_decode_ext_id   Dario Binacchi
  • [PATCH v4 07/14] mtd: nand: Move Samsung specific init/detection logic in nand_samsung.c   Dario Binacchi
  • [PATCH v4 08/14] mtd: nand: Move Hynix specific init/detection logic in nand_hynix.c   Dario Binacchi
  • [PATCH v4 09/14] mtd: nand: Move Toshiba specific init/detection logic in nand_toshiba.c   Dario Binacchi
  • [PATCH v4 10/14] mtd: nand: Move Micron specific init logic in nand_micron.c   Dario Binacchi
  • [PATCH v4 11/14] mtd: nand: Move AMD/Spansion specific init/detection logic in nand_amd.c   Dario Binacchi
  • [PATCH v4 12/14] mtd: nand: Move Macronix specific initialization in nand_macronix.c   Dario Binacchi
  • [PATCH v4 13/14] mtd: nand: toshiba: Retrieve ECC requirements from extended ID   Dario Binacchi
  • [PATCH v4 14/14] mtd: decommission the NAND museum   Dario Binacchi
  • [PATCH v4 00/14] Port manufacturer specific initialization   Michael Nazzareno Trimarchi
• [PATCH] Revert "power: pmic: rk8xx: Support sysreset shutdown method"   Chris Morgan
  • [PATCH] Revert "power: pmic: rk8xx: Support sysreset shutdown method"   Simon Glass
    • [PATCH] Revert "power: pmic: rk8xx: Support sysreset shutdown method"   Michal Suchánek
• Pull request for efi-2022-10-rc1-2   Heinrich Schuchardt
  • Pull request for efi-2022-10-rc1-2   Tom Rini
• [PATCH 3/3] mmc: fsl_esdhc_imx: correct the actual card clock   Tim Harvey
  • [PATCH 3/3] mmc: fsl_esdhc_imx: correct the actual card clock   Bough Chen
• [PATCH] rockchip: rk3328: Set VOP QoS to high priority   Nicolas Frattaroli
• [PATCH 01/20] sh: Remove unused code in arch/sh/lib/bootm.c   Tom Rini
  • [PATCH 02/20] net: Remove CONFIG_SYS_DIRECT_FLASH_TFTP   Tom Rini
  • [PATCH 03/20] Convert CONFIG_SYS_FLASH_EMPTY_INFO to Kconfig   Tom Rini
  • [PATCH 04/20] powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE   Tom Rini
  • [PATCH 05/20] malta: Switch to using CONFIG_SYS_SDRAM_SIZE   Tom Rini
  • [PATCH 06/20] P1010RDB: Drop support for not-CONFIG_SYS_DDR_RAW_TIMING   Tom Rini
  • [PATCH 07/20] Convert CONFIG_SYS_FLASH_CHECKSUM to Kconfig   Tom Rini
  • [PATCH 08/20] Convert CONFIG_SYS_FLASH_ERASE_TOUT et al to Kconfig   Tom Rini
  • [PATCH 09/20] flash: Remove pic32_flash.c   Tom Rini
  • [PATCH 10/20] Convert CONFIG_FLASH_CFI_LEGACY to Kconfig   Tom Rini
  • [PATCH 11/20] Audit <flash.h> inclusion   Tom Rini
  • [PATCH 12/20] Convert CONFIG_SYS_MAX_FLASH_SECT to Kconfig   Tom Rini
  • [PATCH 13/20] Convert CONFIG_SYS_FLASH_QUIET_TEST to Kconfig   Tom Rini
  • [PATCH 14/20] Convert CONFIG_SYS_FMAN_V3 to Kconfig   Tom Rini
  • [PATCH 15/20] configs: Remove a number of unreferenced CONFIG options.   Tom Rini
  • [PATCH 16/20] Convert CONFIG_FSL_CORENET to Kconfig   Tom Rini
  • [PATCH 17/20] Convert CONFIG_SYS_FSL_CCSR_GUR_BE et al to Kconfig   Tom Rini
  • [PATCH 18/20] Convert CONFIG_FSL_MEMAC et al to Kconfig   Tom Rini
  • [PATCH 19/20] Convert CONFIG_SYS_FSL_CORES_PER_CLUSTER to Kconfig   Tom Rini
  • [PATCH 20/20] Convert CONFIG_SYS_FSL_DDR_INTLV_256B to Kconfig   Tom Rini
• Pull request for nand-next   Michael Trimarchi
  • Pull request for nand-next   Tom Rini
• [PATCH] MAINTAINERS: Update e-mail address   Joao Marcos Costa
  • [PATCH] MAINTAINERS: Update e-mail address   Heinrich Schuchardt
• [PATCH v3] Improve Windows build documentation   Martin Bonner
  • [PATCH v3] Improve Windows build documentation   Bin Meng
• [PATCH v4] Improve Windows build documentation   Martin Bonner
  • [PATCH v4] Improve Windows build documentation   Bin Meng
  • [PATCH v4] Improve Windows build documentation   Heinrich Schuchardt
    • [PATCH v4] Improve Windows build documentation   Heinrich Schuchardt
      • [PATCH v4] Improve Windows build documentation   Heinrich Schuchardt
      • [PATCH v4] Improve Windows build documentation   Tom Rini
      • [PATCH v4] Improve Windows build documentation   Martin Bonner
      • [PATCH v4] Improve Windows build documentation   Tom Rini
    • [PATCH v4] Improve Windows build documentation   Martin Bonner
      • [PATCH v4] Improve Windows build documentation   Heinrich Schuchardt
• [PATCH v2] Provide more details of exactly how configuration signatures are calculated   Martin Bonner
  • [PATCH v2] Provide more details of exactly how configuration signatures are calculated   Simon Glass
  • [PATCH v2] Provide more details of exactly how configuration signatures are calculated   Heinrich Schuchardt
• [PATCH v3 0/4] Deduplicate dhelectronics board files   Philip Oberfichtner
  • [PATCH v3 1/4] board: dhelectronics: Implement common MAC address functions   Philip Oberfichtner
  • [PATCH v3 2/4] ARM: imx6: DH: Use common MAC address functions   Philip Oberfichtner
  • [PATCH v3 3/4] ARM: imx8: DH: Use common MAC address functions   Philip Oberfichtner
  • [PATCH v3 4/4] ARM: stm32: DH: Use common MAC address functions   Philip Oberfichtner
    • [PATCH v3 4/4] ARM: stm32: DH: Use common MAC address functions   Patrick DELAUNAY
• [PATCH 0/7] Add support for cyclic function execution infrastruture   Stefan Roese
  • [PATCH 0/7] Add support for cyclic function execution infrastruture   Tom Rini
• "Synchronous Abort" handler, esr 0x96000004 with AGL (Yocto Based)   Sole Mendi Carles (PS-EC/ECC7)
• [PATCH] net: phy: Read physical phy IDs before phy is created   Michal Simek
  • [PATCH] net: phy: Read physical phy IDs before phy is created   Michal Simek
• [PATCH 0/8] arm: mvebu: Add Armada 38x pin muxing support   Pali Rohár
  • [PATCH 1/8] pinctrl: Add new function pinctrl_generic_set_state_prefix()   Pali Rohár
    • [PATCH 1/8] pinctrl: Add new function pinctrl_generic_set_state_prefix()   Stefan Roese
  • [PATCH 2/8] mvebu: pinctrl: Add Armada 38x driver   Pali Rohár
    • [PATCH 2/8] mvebu: pinctrl: Add Armada 38x driver   Stefan Roese
  • [PATCH 3/8] arm: mvebu: Add gpio-ranges into Armada 38x device tree file   Pali Rohár
    • [PATCH 3/8] arm: mvebu: Add gpio-ranges into Armada 38x device tree file   Stefan Roese
  • [PATCH 4/8] pinctrl: Add third argument label for pinctrl_gpio_request() function   Pali Rohár
    • [PATCH 4/8] pinctrl: Add third argument label for pinctrl_gpio_request() function   Stefan Roese
    • [PATCH 4/8] pinctrl: Add third argument label for pinctrl_gpio_request() function   Stefan Roese
      • [PATCH 4/8] pinctrl: Add third argument label for pinctrl_gpio_request() function   Pali Rohár
      • [PATCH 4/8] pinctrl: Add third argument label for pinctrl_gpio_request() function   Stefan Roese
      • [PATCH 4/8] pinctrl: Add third argument label for pinctrl_gpio_request() function   Pali Rohár
  • [PATCH 5/8] gpio: mvebu_gpio: Add .request and .rfree methods for Armada 38x   Pali Rohár
    • [PATCH 5/8] gpio: mvebu_gpio: Add .request and .rfree methods for Armada 38x   Stefan Roese
  • [PATCH 6/8] gpio: mvebu_gpio: Read number of gpios from DT   Pali Rohár
    • [PATCH 6/8] gpio: mvebu_gpio: Read number of gpios from DT   Stefan Roese
  • [PATCH 7/8] gpio: mvebu_gpio: Set bank name to mvebu%d   Pali Rohár
    • [PATCH 7/8] gpio: mvebu_gpio: Set bank name to mvebu%d   Stefan Roese
  • [PATCH 8/8] arm: mvebu: turris_omnia: Enable a38x pinctrl and gpio support   Pali Rohár
    • [PATCH 8/8] arm: mvebu: turris_omnia: Enable a38x pinctrl and gpio support   Stefan Roese
      • [PATCH 8/8] arm: mvebu: turris_omnia: Enable a38x pinctrl and gpio support   Tony Dinh
      • [PATCH 8/8] arm: mvebu: turris_omnia: Enable a38x pinctrl and gpio support   Pali Rohár
      • [PATCH 8/8] arm: mvebu: turris_omnia: Enable a38x pinctrl and gpio support   Stefan Roese
  • [PATCH 0/8] arm: mvebu: Add Armada 38x pin muxing support   Tony Dinh
  • [PATCH 0/8] arm: mvebu: Add Armada 38x pin muxing support   Stefan Roese
• [PATCH 0/6] arm64: a37xx: pinctrl: Fix requesting GPIOs and pinmux command   Pali Rohár
  • [PATCH 1/6] arm64: a37xx: pinctrl: Remove unused grp->pins fields   Pali Rohár
    • [PATCH 1/6] arm64: a37xx: pinctrl: Remove unused grp->pins fields   Stefan Roese
  • [PATCH 2/6] arm64: a37xx: pinctrl: Remove duplicate info->groups and info->ngroups fields   Pali Rohár
    • [PATCH 2/6] arm64: a37xx: pinctrl: Remove duplicate info->groups and info->ngroups fields   Stefan Roese
  • [PATCH 3/6] arm64: a37xx: pinctrl: Mark all functions and structures as static   Pali Rohár
    • [PATCH 3/6] arm64: a37xx: pinctrl: Mark all functions and structures as static   Stefan Roese
  • [PATCH 4/6] arm64: a37xx: pinctrl: Add missing pinmuxes into the list   Pali Rohár
    • [PATCH 4/6] arm64: a37xx: pinctrl: Add missing pinmuxes into the list   Stefan Roese
  • [PATCH 5/6] arm64: a37xx: pinctrl: Implement gpio_request_enable for gpio functionality   Pali Rohár
    • [PATCH 5/6] arm64: a37xx: pinctrl: Implement gpio_request_enable for gpio functionality   Stefan Roese
  • [PATCH 6/6] arm64: a37xx: pinctrl: Implement get_pins_count, get_pin_name and get_pin_muxing functions   Pali Rohár
    • [PATCH 6/6] arm64: a37xx: pinctrl: Implement get_pins_count, get_pin_name and get_pin_muxing functions   Stefan Roese
  • [PATCH 0/6] arm64: a37xx: pinctrl: Fix requesting GPIOs and pinmux command   Stefan Roese
• [PATCH] mvebu: pinctrl: apply SDHCI PHY config for A7K   Pali Rohár
  • [PATCH] mvebu: pinctrl: apply SDHCI PHY config for A7K   Stefan Roese
  • [PATCH] mvebu: pinctrl: apply SDHCI PHY config for A7K   Stefan Roese
• [PATCH 1/2] gpio: Add Turris Omnia MCU driver   Pali Rohár
  • [PATCH 1/2] gpio: Add Turris Omnia MCU driver   Stefan Roese
  • [PATCH v2 1/2] gpio: Add Turris Omnia MCU driver   Pali Rohár
    • [PATCH v2 1/2] gpio: Add Turris Omnia MCU driver   Stefan Roese
    • [PATCH v2 1/2] gpio: Add Turris Omnia MCU driver   Stefan Roese
  • [PATCH v2 2/2] arm: mvebu: turris_omnia: Add mcu node with gpio-controller   Pali Rohár
    • [PATCH v2 2/2] arm: mvebu: turris_omnia: Add mcu node with gpio-controller   Stefan Roese
    • [PATCH v2 2/2] arm: mvebu: turris_omnia: Add mcu node with gpio-controller   Stefan Roese
• [PATCH 2/2] arm: mvebu: turris_omnia: Add mcu node with gpio-controller   Pali Rohár
  • [PATCH 2/2] arm: mvebu: turris_omnia: Add mcu node with gpio-controller   Stefan Roese
• [PATCH v2 0/8] Add support for the i.MXRT1170   Stefano Babic
  • [PATCH v2 0/8] Add support for the i.MXRT1170   Jesse Taube
• [PATCH] MAINTAINERS: Change POWERPC MPC85XX maintainer to Marek Behún   Marek Behún
  • Re: [PATCH] MAINTAINERS: Change POWERPC MPC85XX maintainer to Marek Behún   Sinan Akman
  • [PATCH] MAINTAINERS: Change POWERPC MPC85XX maintainer to Marek Behún   Tom Rini
• [PATCH v2 5/6] imx8m: soc.c: use rom_api_query_boot_infor() wrapper   sbabic at denx.de
• [PATCH] tools: imx8mimage: Keep IVT reserved1 field zero always   sbabic at denx.de
• [PATCH v2 3/6] imx8: add rom api wrappers   sbabic at denx.de
• [PATCH] arm: dts: imx8mm-venice-gw700x: add support for GPY111 phy   sbabic at denx.de
• [PATCH v2 4/6] imx8: use ROM API wrappers in spl_imx_romapi.c   sbabic at denx.de
• [PATCH] mx6cuboxi: fix board detection while patching device-tree phy nodes   sbabic at denx.de
• [PATCH v2 2/6] imx8: sys_proto.h: change guard logic around ROM API   sbabic at denx.de
• [PATCH] usb: ehci-mx6: Remove MX6Q_ARM2 related ifdefery   sbabic at denx.de
• [PATCH v2 6/6] imx8ulp: soc.c: use rom_api_query_boot_infor() wrapper   sbabic at denx.de
• [PATCH v2 1/6] imx8: add hidden IMX8_ROMAPI Kconfig symbol   sbabic at denx.de
• Replace make-fit-atf.py with binman. Was: migrate u-boot-rockchip.bin to binman and generate an image for SPI   Xavier Drudis Ferran
  • Replace make-fit-atf.py with binman. Was: migrate u-boot-rockchip.bin to binman and generate an image for SPI   Xavier Drudis Ferran
    • Replace make-fit-atf.py with binman. Was: migrate u-boot-rockchip.bin to binman and generate an image for SPI   Quentin Schulz
      • Replace make-fit-atf.py with binman. Was: migrate u-boot-rockchip.bin to binman and generate an image for SPI   Xavier Drudis Ferran
      • Replace make-fit-atf.py with binman. Was: migrate u-boot-rockchip.bin to binman and generate an image for SPI   Jerome Forissier
      • [SPAM] Re: Replace make-fit-atf.py with binman. Was: migrate u-boot-rockchip.bin to binman and generate an image for SPI   Xavier Drudis Ferran
      • Replace make-fit-atf.py with binman. Was: migrate u-boot-rockchip.bin to binman and generate an image for SPI   Xavier Drudis Ferran
      • Replace make-fit-atf.py with binman. Was: migrate u-boot-rockchip.bin to binman and generate an image for SPI   Simon Glass
      • Replace make-fit-atf.py with binman. Was: migrate u-boot-rockchip.bin to binman and generate an image for SPI   Simon Glass
      • Replace make-fit-atf.py with binman. Was: migrate u-boot-rockchip.bin to binman and generate an image for SPI   Quentin Schulz
      • Replace make-fit-atf.py with binman. Was: migrate u-boot-rockchip.bin to binman and generate an image for SPI   Simon Glass
• [PATCH 1/8] fs: fat: unexport file_fat_read_at()   Tom Rini
  • [PATCH 1/8] fs: fat: unexport file_fat_read_at()   Qu Wenruo
    • [PATCH 1/8] fs: fat: unexport file_fat_read_at()   Tom Rini
• [ANN] U-Boot v2022.10-rc1 released   Tom Rini
  • [ANN] U-Boot v2022.10-rc1 released   Alexander Dahl
• [PATCH 0/4] Reduce TI-SCI driver size to fix am65x_evm_r5 build   Andrew Davis
  • [PATCH 1/4] firmware: ti_sci: Reduce output on ti_sci_do_xfer error   Andrew Davis
  • [PATCH 2/4] firmware: ti_sci: Factor out message alloc failed message   Andrew Davis
  • [PATCH 3/4] firmware: ti_sci: Remove inline keyword from functions   Andrew Davis
  • [PATCH 4/4] firmware: ti_sci: Move ACK checking to ti_sci_do_xfer() function   Andrew Davis
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Heinrich Schuchardt
• [PATCH v2 0/8] U-boot: fs: add generic unaligned read offset handling   Qu Wenruo
  • [PATCH v2 1/8] fs: fat: unexport file_fat_read_at()   Qu Wenruo
  • [PATCH v2 2/8] fs: btrfs: fix a bug which no data get read if the length is not 0   Qu Wenruo
  • [PATCH v2 3/8] fs: btrfs: fix a crash if specified range is beyond file size   Qu Wenruo
  • [PATCH v2 4/8] fs: btrfs: move the unaligned read code to _fs_read() for btrfs   Qu Wenruo
  • [PATCH v2 5/8] fs: ext4: rely on _fs_read() to handle leading unaligned block read   Qu Wenruo
  • [PATCH v2 6/8] fs: fat: rely on higher layer to get block aligned read range   Qu Wenruo
  • [PATCH v2 7/8] fs: ubifs: rely on higher layer to do unaligned read   Qu Wenruo
  • [PATCH v2 8/8] fs: erofs: add unaligned read range handling   Qu Wenruo
• [PATCH v3 0/8] Add support for the i.MXRT1170   Jesse Taube
  • [PATCH v3 1/8] imx: imxrt1170-evk: Add support for the NXP i.MXRT1170-EVK   Jesse Taube
    • [PATCH v3 1/8] imx: imxrt1170-evk: Add support for the NXP i.MXRT1170-EVK   sbabic at denx.de
  • [PATCH v3 2/8] ARM: dts: imxrt11170-pinfunc: Add pinctrl binding header   Jesse Taube
    • [PATCH v3 2/8] ARM: dts: imxrt11170-pinfunc: Add pinctrl binding header   sbabic at denx.de
  • [PATCH v3 3/8] dt-bindings: imx: Add clock binding for i.MXRT1170   Jesse Taube
    • [PATCH v3 3/8] dt-bindings: imx: Add clock binding for i.MXRT1170   sbabic at denx.de
  • [PATCH v3 4/8] clk: imx: Add i.MXRT11xx pllv3 variant   Jesse Taube
    • [PATCH v3 4/8] clk: imx: Add i.MXRT11xx pllv3 variant   sbabic at denx.de
  • [PATCH v3 5/8] clk: imx: Add initial support for i.MXRT1170 clock driver   Jesse Taube
    • [PATCH v3 5/8] clk: imx: Add initial support for i.MXRT1170 clock driver   sbabic at denx.de
  • [PATCH v3 6/8] RAM: Add changes for i.MXRT11xx series   Jesse Taube
    • [PATCH v3 6/8] RAM: Add changes for i.MXRT11xx series   sbabic at denx.de
  • [PATCH v3 7/8] ARM: dts: imx: add i.MXRT1170-EVK support   Jesse Taube
    • [PATCH v3 7/8] ARM: dts: imx: add i.MXRT1170-EVK support   sbabic at denx.de
  • [PATCH v3 8/8] ARM: imxrt1170_defconfig: Add i.MXRT1170 defconfig   Jesse Taube
    • [PATCH v3 8/8] ARM: imxrt1170_defconfig: Add i.MXRT1170 defconfig   sbabic at denx.de
• [PATCH 1/1] efi_loader: fix efi_convert_device_path_to_text()   Heinrich Schuchardt
• [PATCH v6] board: purism: add the Purism Librem5 phone   Stefano Babic
  • [PATCH v6] board: purism: add the Purism Librem5 phone   Angus Ainslie
• [PATCH] pmic: pca9450: permit config on all bucks and LDOs   Jaehoon Chung
• Build with CONFIG_TOOLS_LIBCRYPTO disabled is broken   Alexander Dahl
  • Build with CONFIG_TOOLS_LIBCRYPTO disabled is broken   Simon Glass
  • Build with CONFIG_TOOLS_LIBCRYPTO disabled is broken   Tom Rini
• [PATCH V2 00/53] NXP-IMX pending patches   Peng Fan (OSS)
  • [PATCH V2 01/53] spl: imx8mm: enlarge SPL_MAX_SIZE   Peng Fan (OSS)
    • [PATCH V2 01/53] spl: imx8mm: enlarge SPL_MAX_SIZE   sbabic at denx.de
  • [PATCH V2 02/53] arm: makefile: cleanup mach-imx usage   Peng Fan (OSS)
    • [PATCH V2 02/53] arm: makefile: cleanup mach-imx usage   sbabic at denx.de
  • [PATCH V2 03/53] imx: Change USB boot device type   Peng Fan (OSS)
    • [PATCH V2 03/53] imx: Change USB boot device type   sbabic at denx.de
  • [PATCH V2 04/53] imx: spl: Allow iMX7/8/8M to overwrite spl_board_boot_device   Peng Fan (OSS)
    • [PATCH V2 04/53] imx: spl: Allow iMX7/8/8M to overwrite spl_board_boot_device   sbabic at denx.de
  • [PATCH V2 05/53] imx: simplify dependency with SPL_BOOTROM_SUPPORT   Peng Fan (OSS)
    • [PATCH V2 05/53] imx: simplify dependency with SPL_BOOTROM_SUPPORT   sbabic at denx.de
  • [PATCH V2 06/53] imx: move get_boot_device to common header   Peng Fan (OSS)
    • [PATCH V2 06/53] imx: move get_boot_device to common header   sbabic at denx.de
  • [PATCH V2 07/53] imx: move get_boot_device to common file   Peng Fan (OSS)
    • [PATCH V2 07/53] imx: move get_boot_device to common file   sbabic at denx.de
  • [PATCH V2 08/53] imx: add USB2_BOOT type   Peng Fan (OSS)
    • [PATCH V2 08/53] imx: add USB2_BOOT type   sbabic at denx.de
  • [PATCH V2 09/53] imx: add basic i.MX9 support   Peng Fan (OSS)
    • [PATCH V2 09/53] imx: add basic i.MX9 support   sbabic at denx.de
  • [PATCH V2 10/53] fsl_lpuart: add i.MX9 support   Peng Fan (OSS)
    • [PATCH V2 10/53] fsl_lpuart: add i.MX9 support   sbabic at denx.de
  • [PATCH V2 11/53] gpio: pca953x: support pcal6524   Peng Fan (OSS)
    • [PATCH V2 11/53] gpio: pca953x: support pcal6524   sbabic at denx.de
  • [PATCH V2 12/53] imx: pinctrl: add pinctrl and pinfunc file for i.MX93   Peng Fan (OSS)
    • [PATCH V2 12/53] imx: pinctrl: add pinctrl and pinfunc file for i.MX93   sbabic at denx.de
  • [PATCH V2 13/53] imx: imx9: Add CCM and clock API support   Peng Fan (OSS)
    • [PATCH V2 13/53] imx: imx9: Add CCM and clock API support   sbabic at denx.de
  • [PATCH V2 14/53] mmc: fsl_esdhc_imx: Support i.MX9   Peng Fan (OSS)
    • [PATCH V2 14/53] mmc: fsl_esdhc_imx: Support i.MX9   sbabic at denx.de
  • [PATCH V2 15/53] spl: Use SPL_FIT_IMAGE_TINY for iMX9   Peng Fan (OSS)
    • [PATCH V2 15/53] spl: Use SPL_FIT_IMAGE_TINY for iMX9   sbabic at denx.de
  • [PATCH V2 16/53] imx: imx9: Add function to initialize timer   Peng Fan (OSS)
    • [PATCH V2 16/53] imx: imx9: Add function to initialize timer   sbabic at denx.de
  • [PATCH V2 17/53] imx: imx9: disable watchdog   Peng Fan (OSS)
    • [PATCH V2 17/53] imx: imx9: disable watchdog   sbabic at denx.de
  • [PATCH V2 18/53] imx: imx9: support romapi   Peng Fan (OSS)
    • [PATCH V2 18/53] imx: imx9: support romapi   sbabic at denx.de
  • [PATCH V2 19/53] misc: imx: S400_API: Move S400 MU and API to a common place   Peng Fan (OSS)
    • [PATCH V2 19/53] misc: imx: S400_API: Move S400 MU and API to a common place   sbabic at denx.de
  • [PATCH V2 20/53] misc: s4mu: Support iMX93 with Sentinel MU   Peng Fan (OSS)
    • [PATCH V2 20/53] misc: s4mu: Support iMX93 with Sentinel MU   sbabic at denx.de
  • [PATCH V2 21/53] misc: S400_API: Update release RDC API   Peng Fan (OSS)
    • [PATCH V2 21/53] misc: S400_API: Update release RDC API   sbabic at denx.de
  • [PATCH V2 22/53] misc: S400_API: New API for FW status and chip info   Peng Fan (OSS)
    • [PATCH V2 22/53] misc: S400_API: New API for FW status and chip info   sbabic at denx.de
  • [PATCH V2 23/53] misc: s400_api: introduce ahab_release_m33_trout   Peng Fan (OSS)
    • [PATCH V2 23/53] misc: s400_api: introduce ahab_release_m33_trout   sbabic at denx.de
  • [PATCH V2 24/53] imx: imx9: Add TRDC driver for TRDC init   Peng Fan (OSS)
    • [PATCH V2 24/53] imx: imx9: Add TRDC driver for TRDC init   sbabic at denx.de
  • [PATCH V2 25/53] imx: imx9: Add AHAB boot support   Peng Fan (OSS)
    • [PATCH V2 25/53] imx: imx9: Add AHAB boot support   sbabic at denx.de
  • [PATCH V2 26/53] imx: imx9: Get the chip revision through S400 API   Peng Fan (OSS)
    • [PATCH V2 26/53] imx: imx9: Get the chip revision through S400 API   sbabic at denx.de
  • [PATCH V2 27/53] misc: S400_API: Rename imx8ulp_s400_msg to sentinel_msg   Peng Fan (OSS)
    • [PATCH V2 27/53] misc: S400_API: Rename imx8ulp_s400_msg to sentinel_msg   sbabic at denx.de
  • [PATCH V2 28/53] misc: imx8ulp: move fuse.c from imx8ulp to sentinel   Peng Fan (OSS)
    • [PATCH V2 28/53] misc: imx8ulp: move fuse.c from imx8ulp to sentinel   sbabic at denx.de
  • [PATCH V2 29/53] misc: fuse: support to access fuse on i.MX93   Peng Fan (OSS)
    • [PATCH V2 29/53] misc: fuse: support to access fuse on i.MX93   sbabic at denx.de
  • [PATCH V2 30/53] misc: fuse: update the code for accessing fuse of i.MX93   Peng Fan (OSS)
    • [PATCH V2 30/53] misc: fuse: update the code for accessing fuse of i.MX93   sbabic at denx.de
  • [PATCH V2 31/53] imx: imx9: Add gpio registers structure   Peng Fan (OSS)
    • [PATCH V2 31/53] imx: imx9: Add gpio registers structure   sbabic at denx.de
  • [PATCH V2 32/53] imx: imx9: Add MIX power init   Peng Fan (OSS)
    • [PATCH V2 32/53] imx: imx9: Add MIX power init   sbabic at denx.de
  • [PATCH V2 33/53] imx: imx9: Add M33 release prepare function   Peng Fan (OSS)
    • [PATCH V2 33/53] imx: imx9: Add M33 release prepare function   sbabic at denx.de
  • [PATCH V2 34/53] imx: imx9: Support booting m33 from Acore   Peng Fan (OSS)
    • [PATCH V2 34/53] imx: imx9: Support booting m33 from Acore   sbabic at denx.de
  • [PATCH V2 35/53] imx: imx9: Support multiple env storages at runtime   Peng Fan (OSS)
    • [PATCH V2 35/53] imx: imx9: Support multiple env storages at runtime   sbabic at denx.de
  • [PATCH V2 36/53] imx: imx9: clock: Add DDR clock support   Peng Fan (OSS)
    • [PATCH V2 36/53] imx: imx9: clock: Add DDR clock support   sbabic at denx.de
  • [PATCH V2 37/53] ddr: imx: Add i.MX9 DDR controller driver   Peng Fan (OSS)
    • [PATCH V2 37/53] ddr: imx: Add i.MX9 DDR controller driver   sbabic at denx.de
  • [PATCH V2 38/53] ddr: imx9: enable Performance monitor counter   Peng Fan (OSS)
    • [PATCH V2 38/53] ddr: imx9: enable Performance monitor counter   sbabic at denx.de
  • [PATCH V2 39/53] arm: dts: Add i.MX93 SoC DTSi file   Peng Fan (OSS)
    • [PATCH V2 39/53] arm: dts: Add i.MX93 SoC DTSi file   sbabic at denx.de
  • [PATCH V2 40/53] imx: imx93_evk: Add basic board support   Peng Fan (OSS)
    • [PATCH V2 40/53] imx: imx93_evk: Add basic board support   sbabic at denx.de
  • [PATCH V2 41/53] imx: imx93_evk: Set ARM clock to 1.7Ghz   Peng Fan (OSS)
    • [PATCH V2 41/53] imx: imx93_evk: Set ARM clock to 1.7Ghz   sbabic at denx.de
  • [PATCH V2 42/53] net: fec_mxc: support i.MX93   Peng Fan (OSS)
    • [PATCH V2 42/53] net: fec_mxc: support i.MX93   sbabic at denx.de
  • [PATCH V2 43/53] net: dwc_eth_qos: fix build break when CLK not enabled   Peng Fan (OSS)
    • [PATCH V2 43/53] net: dwc_eth_qos: fix build break when CLK not enabled   sbabic at denx.de
  • [PATCH V2 44/53] net: dwc_eth_qos: public some functions   Peng Fan (OSS)
    • [PATCH V2 44/53] net: dwc_eth_qos: public some functions   sbabic at denx.de
  • [PATCH V2 45/53] net: dwc_eth_qos: move i.MX code out   Peng Fan (OSS)
    • [PATCH V2 45/53] net: dwc_eth_qos: move i.MX code out   sbabic at denx.de
  • [PATCH V2 46/53] net: eqos: add function to get phy node and address   Peng Fan (OSS)
    • [PATCH V2 46/53] net: eqos: add function to get phy node and address   sbabic at denx.de
  • [PATCH V2 47/53] net: dwc_eth_qos: introduce eqos hook eqos_get_enetaddr   Peng Fan (OSS)
    • [PATCH V2 47/53] net: dwc_eth_qos: introduce eqos hook eqos_get_enetaddr   sbabic at denx.de
  • [PATCH V2 48/53] board: freescale: imx93_evk: support ethernet   Peng Fan (OSS)
    • [PATCH V2 48/53] board: freescale: imx93_evk: support ethernet   sbabic at denx.de
  • [PATCH V2 49/53] tools: image: support i.MX93   Peng Fan (OSS)
    • [PATCH V2 49/53] tools: image: support i.MX93   sbabic at denx.de
  • [PATCH V2 50/53] arm: dts: imx8m: update binman ddr firmware node name   Peng Fan (OSS)
    • [PATCH V2 50/53] arm: dts: imx8m: update binman ddr firmware node name   sbabic at denx.de
  • [PATCH V2 51/53] ddr: imx8m: helper: load ddr firmware according to binman symbols   Peng Fan (OSS)
    • [PATCH V2 51/53] ddr: imx8m: helper: load ddr firmware according to binman symbols   sbabic at denx.de
  • [PATCH V2 52/53] arm: dts: imx8m: shrink ddr firmware size to actual file size   Peng Fan (OSS)
    • [PATCH V2 52/53] arm: dts: imx8m: shrink ddr firmware size to actual file size   sbabic at denx.de
  • [PATCH V2 53/53] imx: imx8mm-icore: migrate to use BINMAN   Peng Fan (OSS)
    • [PATCH V2 53/53] imx: imx8mm-icore: migrate to use BINMAN   sbabic at denx.de
• [EXT] Re: [PATCH v3] crypto/fsl: fsl_rsa: Fix dcache issue in the driver   Stefano Babic
  • [EXT] Re: [PATCH v3] crypto/fsl: fsl_rsa: Fix dcache issue in the driver   Gaurav Jain
    • [EXT] Re: [PATCH v3] crypto/fsl: fsl_rsa: Fix dcache issue in the driver   Stefano Babic
• [GIT PULL] xilinx patches for v2022.10-rc2   Michal Simek
  • [GIT PULL] xilinx patches for v2022.10-rc2   Tom Rini
• [PATCH v4 0/4] Deduplicate dhelectronics board files   Philip Oberfichtner
  • [PATCH v4 3/4] ARM: imx8: DH: Use common MAC address functions   Philip Oberfichtner
  • [PATCH v4 4/4] ARM: stm32: DH: Use common MAC address functions   Philip Oberfichtner
• [PATCH v4 1/4] board: dhelectronics: Implement common MAC address functions   Philip Oberfichtner
• [PATCH v4 2/4] ARM: imx6: DH: Use common MAC address functions   Philip Oberfichtner
• [PATCH 1/1] configs: imx8mm-cl-iot-gate: enable extension command   sbabic at denx.de
• [PATCH] configs: imx8mp_venice: remove unnecessary FEC_QUIRK_ENET_MAC   sbabic at denx.de
• [PATCH 0/4] cmd: mvebu/bubt: Improvements for image verification   Pali Rohár
  • [PATCH 2/4] cmd: mvebu/bubt: Correctly propagate failure during tftp transport   Pali Rohár
    • [PATCH 2/4] cmd: mvebu/bubt: Correctly propagate failure during tftp transport   Stefan Roese
  • [PATCH 4/4] cmd: mvebu/bubt: Fix cmd main return value on error   Pali Rohár
    • [PATCH 4/4] cmd: mvebu/bubt: Fix cmd main return value on error   Stefan Roese
  • [PATCH 0/4] cmd: mvebu/bubt: Improvements for image verification   Stefan Roese
• [PATCH 1/4] cmd: mvebu/bubt: Verify image type for all 32-bit Aramda SoCs and Armada 3700   Pali Rohár
  • [PATCH 1/4] cmd: mvebu/bubt: Verify image type for all 32-bit Aramda SoCs and Armada 3700   Stefan Roese
• [PATCH 3/4] cmd: mvebu/bubt: Add support for sha512 checksum validation for Armada 3700   Pali Rohár
  • [PATCH 3/4] cmd: mvebu/bubt: Add support for sha512 checksum validation for Armada 3700   Stefan Roese
• Pull request: u-boot-imx u-boot-imx-20220726   Stefano Babic
  • Pull request: u-boot-imx u-boot-imx-20220726   Michael Nazzareno Trimarchi
    • Pull request: u-boot-imx u-boot-imx-20220726   Tom Rini
      • Pull request: u-boot-imx u-boot-imx-20220726   Michael Nazzareno Trimarchi
      • Pull request: u-boot-imx u-boot-imx-20220726   Stefano Babic
  • Pull request: u-boot-imx u-boot-imx-20220726   Tom Rini
    • Pull request: u-boot-imx u-boot-imx-20220726   Fabio Estevam
      • Pull request: u-boot-imx u-boot-imx-20220726   Josua Mayer
      • Pull request: u-boot-imx u-boot-imx-20220726   Francesco Dolcini
      • Pull request: u-boot-imx u-boot-imx-20220726   Stefano Babic
• [PATCH v5 1/3] drivers: tee: optee: remove unused probe local variable   Etienne Carriere
  • [PATCH v5 2/3] drivers: tee: optee: discover OP-TEE services   Etienne Carriere
  • [PATCH v5 3/3] drivers: rng: optee_rng: register to CONFIG_OPTEE_SERVICE_DISCOVERY   Etienne Carriere
• [PATCH/RFC] rockchip: derive GPIO bank from alias if available   John Keeping
  • [PATCH/RFC] rockchip: derive GPIO bank from alias if available   Simon Glass
    • [PATCH/RFC] rockchip: derive GPIO bank from alias if available   John Keeping
• SiFive Unmatched (riscv64), hang scanning xhci_pci   Alex
• [RFC PATCH 0/2] cmd/fru: move FRU handling support to common region   Jae Hyun Yoo
  • [RFC PATCH 1/2] cmd/fru: cmd/fru: move FRU handling support to common region   Jae Hyun Yoo
    • [RFC PATCH 1/2] cmd/fru: cmd/fru: move FRU handling support to common region   Michal Simek
      • [RFC PATCH 1/2] cmd/fru: cmd/fru: move FRU handling support to common region   Jae Hyun Yoo
      • [RFC PATCH 1/2] cmd/fru: cmd/fru: move FRU handling support to common region   Jae Hyun Yoo
  • [RFC PATCH 2/2] cmd/fru: add product info area parsing support   Jae Hyun Yoo
    • [RFC PATCH 2/2] cmd/fru: add product info area parsing support   Michal Simek
      • [RFC PATCH 2/2] cmd/fru: add product info area parsing support   Jae Hyun Yoo
• rockchip: rk3399: add Support NanoPi R4S 1GB DDR3 Version   h3lmut
• Please pull u-boot-dm   Simon Glass
  • Please pull u-boot-dm   Tom Rini
• [GIT PULL] Please pull u-boot-pmic master   Jaehoon Chung
  • [GIT PULL] Please pull u-boot-pmic master   Tom Rini
• [GIT PULL] Please pull u-boot-mmc master   Jaehoon Chung
  • [GIT PULL] Please pull u-boot-mmc master   Tom Rini
• [PATCH v2 0/2] Initial step for Linux DT sync on Qcom SoCs   Sumit Garg
  • [PATCH v2 1/2] pinctrl: sdm845: Remove redundant CONFIG_SDM845 check   Sumit Garg
  • [PATCH v2 2/2] arm: dts: qcom: Sync pinctrl DT nodes with Linux bindings   Sumit Garg
• [PATCH 1/4] arm: mvebu: Fix compatible string for nand controller   Pali Rohár
  • [PATCH 2/4] arm: mvebu: Synchronize armada-38x.dtsi with Linux v5.20   Pali Rohár
    • [PATCH 2/4] arm: mvebu: Synchronize armada-38x.dtsi with Linux v5.20   Stefan Roese
    • [PATCH 2/4] arm: mvebu: Synchronize armada-38x.dtsi with Linux v5.20   Stefan Roese
  • [PATCH 3/4] arm: mvebu: Synchronize armada-385.dtsi with Linux v5.20   Pali Rohár
    • [PATCH 3/4] arm: mvebu: Synchronize armada-385.dtsi with Linux v5.20   Stefan Roese
    • [PATCH 3/4] arm: mvebu: Synchronize armada-385.dtsi with Linux v5.20   Stefan Roese
  • [PATCH 4/4] arm: mvebu: Synchronize armada-385-turris-omnia with Linux v5.20   Pali Rohár
    • [PATCH 4/4] arm: mvebu: Synchronize armada-385-turris-omnia with Linux v5.20   Stefan Roese
    • [PATCH 4/4] arm: mvebu: Synchronize armada-385-turris-omnia with Linux v5.20   Stefan Roese
  • [PATCH 1/4] arm: mvebu: Fix compatible string for nand controller   Michael Nazzareno Trimarchi
    • [PATCH 1/4] arm: mvebu: Fix compatible string for nand controller   Pali Rohár
      • [PATCH 1/4] arm: mvebu: Fix compatible string for nand controller   Michael Nazzareno Trimarchi
      • [PATCH 1/4] arm: mvebu: Fix compatible string for nand controller   Pali Rohár
      • [PATCH 1/4] arm: mvebu: Fix compatible string for nand controller   Michael Nazzareno Trimarchi
      • [PATCH 1/4] arm: mvebu: Fix compatible string for nand controller   Stefan Roese
  • [PATCH 1/4] arm: mvebu: Fix compatible string for nand controller   Stefan Roese
    • [PATCH 1/4] arm: mvebu: Fix compatible string for nand controller   Michael Nazzareno Trimarchi
      • [PATCH 1/4] arm: mvebu: Fix compatible string for nand controller   Michael Nazzareno Trimarchi
      • [PATCH 1/4] arm: mvebu: Fix compatible string for nand controller   Stefan Roese
  • [PATCH 1/4] arm: mvebu: Fix compatible string for nand controller   Stefan Roese
• [PATCH u-boot-marvell] arm: mvebu: turris_omnia: Fix mpp26 pin name and comment   Marek Behún
  • [PATCH u-boot-marvell] arm: mvebu: turris_omnia: Fix mpp26 pin name and comment   Stefan Roese
  • [PATCH u-boot-marvell] arm: mvebu: turris_omnia: Fix mpp26 pin name and comment   Stefan Roese
• [PATCH] cmd: part: Add partition-related type command   Enric Balletbo i Serra
  • [PATCH] cmd: part: Add partition-related type command   Tom Rini
  • [PATCH] cmd: part: Add partition-related type command   Heinrich Schuchardt
• [PATCH] tools: relocate-rela: Don't assume <elf.h> defines Microblaze stuff   Mark Kettenis
  • [PATCH] tools: relocate-rela: Don't assume <elf.h> defines Microblaze stuff   Michal Simek
    • [PATCH] tools: relocate-rela: Don't assume <elf.h> defines Microblaze stuff   Mark Kettenis
• [PATCH 1/1] Azure: Move to using macOS-12 image   Tom Rini
• [PATCH] board: freescale: p1_p2_rdb_pc: Remove I-flag from second L2 SRAM mapping   Pali Rohár
• [PATCH] lz4: Fix compile warning comparison of distinct pointer types   Pali Rohár
• [PATCH] scripts/config: pick config script from kernel scripts   Milan P. Stanić
• [PATCH 00/28] ARM: Add Rockchip RV1126 support   Jagan Teki
  • [PATCH 01/28] ram: Mark ram-uclass depend on TPL_DM or SPL_DM   Jagan Teki
  • [PATCH 02/28] ram: rockchip: Add common ddr type configs   Jagan Teki
  • [PATCH 03/28] tools: rkcommon: Correct SPL size for px30   Jagan Teki
  • [PATCH 04/28] ram: rockchip: Compute ddr capacity based on grf split   Jagan Teki
  • [PATCH 05/28] ram: rockchip: Update high row detection for full bw   Jagan Teki
  • [PATCH 06/28] ram: rockchip: Update ddr pctl regs for px30   Jagan Teki
  • [PATCH 07/28] ram: rockchip: Add rv1126 ddr3 support   Jagan Teki
  • [PATCH 08/28] ram: rockchip: Add rv1126 ddr loader params   Jagan Teki
  • [PATCH 09/28] ram: rockchip: Add rv1126 ddr driver support   Jagan Teki
  • [PATCH 10/28] ram: rockchip: rv1126: Control ddr init prints via DEBUG   Jagan Teki
  • [PATCH 11/28] ram: rockchip: Add rv1126 lpddr4 support   Jagan Teki
  • [PATCH 12/28] pinctrl: rockchip: Add pinctrl route types   Jagan Teki
  • [PATCH 13/28] pinctrl: rockchip: Add rv1126 support   Jagan Teki
  • [PATCH 14/28] arch: rockchip: Add cru header for rv1126   Jagan Teki
  • [PATCH 15/28] clk: rockchip: Add rv1126 clk support   Jagan Teki
  • [PATCH 16/28] dt-bindings: power: Add power-domain header for rv1126   Jagan Teki
  • [PATCH 17/28] dt-bindings: clk: Add dt-binding header for RV1126   Jagan Teki
  • [PATCH 18/28] arm: rockchip: Add grf header for rv1126   Jagan Teki
  • [PATCH 19/28] ARM: dts: rockchip: Add Rockchip RV1126 pinctrl   Jagan Teki
  • [PATCH 20/28] ARM: dts: rockchip: Add Rockchip RV1126 SoC   Jagan Teki
  • [PATCH 21/28] arm: rockchip: Add RV1126 arch core support   Jagan Teki
  • [PATCH 22/28] arm: rockchip: rv1126: Set dram area unsecure for SPL   Jagan Teki
  • [PATCH 23/28] configs: rockchip: Add rv1126 common config   Jagan Teki
  • [PATCH 24/28] rockchip: mkimage: Add rv1126 support   Jagan Teki
  • [PATCH 25/28] ARM: dts: rockchip: rv1126: Add Edgeble AI Edge Compute Module 0   Jagan Teki
  • [PATCH 26/28] ARM: dts: rockchip: rv1126: Add Edgeble AI Edge Compute Module 0 Carrier   Jagan Teki
  • [PATCH 27/28] ARM: dts: rockchip: Add rv1126-u-boot.dtsi   Jagan Teki
  • [PATCH 28/28] board: Add Edgeble AI Edge Compute Module 0 Carrier   Jagan Teki
• [PATCH V3] bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2 boards   Michael Trimarchi
  • [PATCH V3] bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2 boards   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH 00/10] Add pruss and pru support for am33xx and am57xx   Greg Leonberg
  • [U-Boot] [PATCH 02/10] arm: arch-am33xx: Add prm_per definition   Greg Leonberg
  • [U-Boot] [PATCH 03/10] arm: arch-am33xx: Add pru_icss clkctrl   Greg Leonberg
  • [U-Boot] [PATCH 04/10] soc: ti: pruss: Add support for am33xx   Greg Leonberg
  • [U-Boot] [PATCH 05/10] soc: ti: pruss: Add support for am57xx   Greg Leonberg
  • [U-Boot] [PATCH 06/10] remoteproc: pru_rproc: Add support for am33xx   Greg Leonberg
  • [U-Boot] [PATCH 07/10] remoteproc: pru_rproc: Add support for am57xx   Greg Leonberg
  • [U-Boot] [PATCH 08/10] remoteproc: pru_rproc: Add is_running support   Greg Leonberg
  • [U-Boot] [PATCH 09/10] arm: dts: am33xx: Add pruss and pru   Greg Leonberg
  • [U-Boot] [PATCH 10/10] arm: dts: dra7: Add pruss and pru   Greg Leonberg
• [U-Boot] [PATCH 01/10] arm: Add omap5 pruss1 and pruss2 to prcm structure   Greg Leonberg
• [PATCH] mx6cuboxi: fix ethernet after synchronise device-tree   Josua Mayer
  • [PATCH] mx6cuboxi: fix ethernet after synchronise device-tree   Fabio Estevam
  • [PATCH] mx6cuboxi: fix ethernet after synchronise device-tree   Tom Rini
  • [PATCH] mx6cuboxi: fix ethernet after synchronise device-tree   Tom Rini
    • [PATCH] mx6cuboxi: fix ethernet after synchronise device-tree   Fabio Estevam
      • [PATCH] mx6cuboxi: fix ethernet after synchronise device-tree   Tom Rini
• [PATCH v2 0/7] Add support for cyclic function execution infrastruture   Stefan Roese
  • [PATCH v2 2/7] cyclic: Add basic support for cyclic function execution infrastruture   Stefan Roese
  • [PATCH v2 3/7] cyclic: Integrate cyclic infrastructure into WATCHDOG_RESET   Stefan Roese
  • [PATCH v2 4/7] cyclic: Integrate cyclic functionality at bootup in board_r/f   Stefan Roese
  • [PATCH v2 5/7] cyclic: Add 'cyclic list' command   Stefan Roese
  • [PATCH v2 6/7] sandbox: Add cyclic demo function   Stefan Roese
  • [PATCH v2 7/7] mips: octeon_nic23: Add PCIe FLR fixup via cyclic infrastructure   Stefan Roese
  • [PATCH v2 0/7] Add support for cyclic function execution infrastruture   Simon Glass
• [PATCH v2 1/7] time: Import time_after64() and friends from Linux   Stefan Roese
• [PATCH V4] bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2 boards   Michael Trimarchi
  • [PATCH V4] bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2 boards   sbabic at denx.de
• [PATCH v2] boot: allow bootmeth-distro without CONFIG_NET   John Keeping
  • [PATCH v2] boot: allow bootmeth-distro without CONFIG_NET   Tom Rini
  • [PATCH v2] boot: allow bootmeth-distro without CONFIG_NET   Simon Glass
• [PATCH] pci: pci_mvebu: Add support for reset-gpios   Pali Rohár
  • [PATCH] pci: pci_mvebu: Add support for reset-gpios   Stefan Roese
    • [PATCH] pci: pci_mvebu: Add support for reset-gpios   Pali Rohár
      • [PATCH] pci: pci_mvebu: Add support for reset-gpios   Stefan Roese
      • [PATCH] pci: pci_mvebu: Add support for reset-gpios   Pali Rohár
      • [PATCH] pci: pci_mvebu: Add support for reset-gpios   Francesco Dolcini
      • [PATCH] pci: pci_mvebu: Add support for reset-gpios   Pali Rohár
      • [PATCH] pci: pci_mvebu: Add support for reset-gpios   Stefan Roese
• [RFCv1] doc: develop: Describe using CONFIG vs CFG for values   Tom Rini
  • [RFCv1] doc: develop: Describe using CONFIG vs CFG for values   Pali Rohár
    • [RFCv1] doc: develop: Describe using CONFIG vs CFG for values   Tom Rini
  • [RFCv1] doc: develop: Describe using CONFIG vs CFG for values   Heinrich Schuchardt
    • [RFCv1] doc: develop: Describe using CONFIG vs CFG for values   Tom Rini
      • [RFCv1] doc: develop: Describe using CONFIG vs CFG for values   Heinrich Schuchardt
  • [RFCv1] doc: develop: Describe using CONFIG vs CFG for values   Simon Glass
    • [RFCv1] doc: develop: Describe using CONFIG vs CFG for values   Tom Rini
      • [RFCv1] doc: develop: Describe using CONFIG vs CFG for values   Simon Glass
• [PATCH] board: ls1043ardb: fdt fixups for revision v7.0 boards   Camelia Groza
• [PATCH 0/5] Another smaller update to the nand stack   Michael Trimarchi
  • [PATCH 1/5] mtd: nand: Rename the nand_manufacturers struct   Michael Trimarchi
  • [PATCH 2/5] mtd: nand: change return type of nand_get_flash_type() to int   Michael Trimarchi
  • [PATCH 3/5] mtd: nand: Rename nand_get_flash_type() into nand_detect()   Michael Trimarchi
  • [PATCH 4/5] mtd: nand: samsung: Retrieve ECC requirements from extended   Michael Trimarchi
  • [PATCH 5/5] configs: imx8mn_bsh_smm_s2: Use nand_base ident for nand identification   Michael Trimarchi
• [RFCv2] doc: develop: Describe system configuration   Tom Rini
  • [RFCv2] doc: develop: Describe system configuration   Pali Rohár
    • [RFCv2] doc: develop: Describe system configuration   Tom Rini
      • [RFCv2] doc: develop: Describe system configuration   Pali Rohár
      • [RFCv2] doc: develop: Describe system configuration   Tom Rini
      • [RFCv2] doc: develop: Describe system configuration   Pali Rohár
      • [RFCv2] doc: develop: Describe system configuration   Tom Rini
  • [RFCv2] doc: develop: Describe system configuration   Heinrich Schuchardt
    • [RFCv2] doc: develop: Describe system configuration   Tom Rini
    • [RFCv2] doc: develop: Describe system configuration   Tom Rini
• [PATCH v4] crypto/fsl: fsl_hash: Fix crash in flush dcache   Gaurav Jain
• [PATCH 1/2] arm: mvebu: turris_omnia: Show MCU type in show_board_info()   Pali Rohár
  • [PATCH 2/2] arm: mvebu: turris_omnia: Add support for design with SW reset signals   Pali Rohár
• [PATCH] bootstd: doc: Fix typos   Paul Barker
  • [PATCH] bootstd: doc: Fix typos   Simon Glass
• [v3] doc: develop: Describe system configuration   Tom Rini
  • [v3] doc: develop: Describe system configuration   Heinrich Schuchardt
    • [v3] doc: develop: Describe system configuration   Tom Rini
  • [v3] doc: develop: Describe system configuration   Pali Rohár
• [BISECTED] BeagleBone Black doesn't boot after a58147c2dbbf   Matwey V. Kornilov
  • [BISECTED] BeagleBone Black doesn't boot after a58147c2dbbf   Tom Rini
    • [BISECTED] BeagleBone Black doesn't boot after a58147c2dbbf   Matwey V. Kornilov
      • [BISECTED] BeagleBone Black doesn't boot after a58147c2dbbf   Tom Rini
      • [BISECTED] BeagleBone Black doesn't boot after a58147c2dbbf   Matwey V. Kornilov
• Pull request for doc-2022-10-rc2   Heinrich Schuchardt
  • Pull request for doc-2022-10-rc2   Tom Rini
• [PATCH 0/5] arm: bcmbca: add basic support for Broadcom BCA SoCs   William Zhang
  • [PATCH 1/5] arm: bcmbca: add bcm63178 SoC support   William Zhang
  • [PATCH 2/5] arm: bcmbca: add bcm6846 SoC support   William Zhang
  • [PATCH 3/5] arm: bcmbca: add bcm6878 SoC support   William Zhang
  • [PATCH 4/5] arm: bcmbca: add bcm6756 SoC support   William Zhang
  • [PATCH 5/5] arm: bcmbca: add bcm63148 SoC support   William Zhang
• [PATCH v1 0/2] cmd/fru: move FRU handling support to common region   Jae Hyun Yoo
  • [PATCH v1 1/2] cmd: fru: move FRU handling support to common region   Jae Hyun Yoo
  • [PATCH v1 2/2] cmd: fru: add product info area parsing support   Jae Hyun Yoo
• [PATCH v1 1/3] arm: dts: rockchip: rk3288: move thermal sub nodes to dtsi   Johan Jonker
• [PATCH v1 2/3] arm: dts: rockchip: update cpu and gpu nodes   Johan Jonker
• [PATCH v1 3/3] arm: dts: rockchip: rk3288: partial sync from Linux   Johan Jonker
• [PATCH] spl: fit: Report fdt error for loading u-boot   Su, Bao Cheng
  • [PATCH v2] spl: fit: Report fdt error for loading u-boot   Su, Bao Cheng
• [PATCH 0/1] sunxi: support half DQ width memory on R40   Evgeny Boger
  • [PATCH 1/1] sunxi: support half DQ width memory on R40   Evgeny Boger
• [PATCH v2 00/35] vbe: Verified Boot for Embedded initial support   Simon Glass
  • [PATCH v2 01/35] vbe: Add some documentation   Simon Glass
  • [PATCH v2 02/35] video: Renname vbe.h to vesa.h   Simon Glass
  • [PATCH v2 03/35] video: Rename structs and functions to avoid VBE   Simon Glass
  • [PATCH v2 04/35] dm: core: Split out the declaration of ofnode   Simon Glass
  • [PATCH v2 05/35] dm: core: Add a note about how livetree updates work   Simon Glass
  • [PATCH v2 06/35] dm: core: Introduce support for multiple trees   Simon Glass
  • [PATCH v2 07/35] dm: core: Move ofnode-writing test to ofnode   Simon Glass
  • [PATCH v2 08/35] dm: core: Swap parameters of ofnode_write_prop()   Simon Glass
  • [PATCH v2 09/35] dm: core: Tidy up ofnode-writing test   Simon Glass
  • [PATCH v2 10/35] dm: core: Prepare for updating the device tree with ofnode   Simon Glass
  • [PATCH v2 11/35] dm: core: Allow writing to a flat tree with ofnode   Simon Glass
  • [PATCH v2 12/35] dm: core: Add support for writing u32 with ofnode   Simon Glass
  • [PATCH v2 13/35] dm: core: Support sandbox with read interface   Simon Glass
  • [PATCH v2 14/35] bootstd: Drop delays in the tests   Simon Glass
  • [PATCH v2 15/35] bootstd: Fix comment in bootmeth test   Simon Glass
  • [PATCH v2 16/35] bootstd: Detect empty bootmeth ordering   Simon Glass
  • [PATCH v2 17/35] bootstd: Provide a bootmeth method to obtain state info   Simon Glass
  • [PATCH v2 18/35] bootstd: Tidy up var naming in bootdev_setup_iter_order()   Simon Glass
  • [PATCH v2 19/35] bootstd: Allow bootmeths to be marked as global   Simon Glass
  • [PATCH v2 20/35] bootstd: Allow EFI bootmgr to support an invalid bootflow   Simon Glass
  • [PATCH v2 21/35] bootstd: Allow the bootdev to be optional in bootflows   Simon Glass
  • [PATCH v2 22/35] bootstd: Tidy comments in bootflow_scan_bootdev()   Simon Glass
  • [PATCH v2 23/35] bootstd: Support bootflows with global bootmeths   Simon Glass
  • [PATCH v2 24/35] dm: core: Call dm_scan_other() when setting up for tests   Simon Glass
  • [PATCH v2 25/35] bootstd: Allow scanning for global bootmeths separately   Simon Glass
  • [PATCH v2 26/35] bootstd: Always create the EFI bootmgr bootmeth   Simon Glass
  • [PATCH v2 27/35] bootstd: Drop the system bootdev   Simon Glass
  • [PATCH v2 28/35] event: Change EVENT_SPY to global   Simon Glass
  • [PATCH v2 29/35] event: Add an event for device tree fixups   Simon Glass
  • [PATCH v2 30/35] vbe: Add initial support for VBE   Simon Glass
  • [PATCH v2 31/35] vbe: Support VBE simple   Simon Glass
  • [PATCH v2 32/35] bootstd: Add vbe bootmeth into sandbox   Simon Glass
  • [PATCH v2 33/35] bootstd: Update documentation   Simon Glass
  • [PATCH v2 34/35] bootstd: Check building without global bootmeths   Simon Glass
  • [PATCH v2 35/35] vbe: Add a new vbe command   Simon Glass
• [MVEBU] SPI flash offset was depecrated?   Tony Dinh
  • [MVEBU] SPI flash offset was depecrated?   Pali Rohár
    • [MVEBU] SPI flash offset was depecrated?   Tony Dinh
      • [MVEBU] SPI flash offset was depecrated?   Tony Dinh
• [PATCH v2] spl: fit: Report fdt error for loading u-boot   Simon Glass
• [PATCH 0/7] fdt: Fix up tests and build warnings on newer distros   Simon Glass
  • [PATCH 1/7] dtoc: Tidy up fdt_tests RunTestCoverage() args   Simon Glass
  • [PATCH 2/7] dtoc: Tidy up fdt_tests RunTests()   Simon Glass
  • [PATCH 3/7] dtoc: Fix fdt test coverage   Simon Glass
  • [PATCH 4/7] dtoc: Move main program into its own function   Simon Glass
  • [PATCH 5/7] test_fdt: Convert to use argparse   Simon Glass
  • [PATCH 6/7] dtoc: Correct remaining pylint problems in test_fdt   Simon Glass
  • [PATCH 7/7] fdt: Move to setuptools   Simon Glass
• [PATCH] nvme: Do a clean NVMe shutdown   Hector Martin
  • [PATCH] nvme: Do a clean NVMe shutdown   Mark Kettenis
• [PATCH 1/1] Makefile: avoid false positive -Wmaybe-uninitialized   Heinrich Schuchardt
  • [PATCH 1/1] Makefile: avoid false positive -Wmaybe-uninitialized   Simon Glass
• [PATCH 1/1] fs/erofs: silence erofs_probe()   Heinrich Schuchardt
  • [PATCH 1/1] fs/erofs: silence erofs_probe()   Huang Jianan
  • [PATCH 1/1] fs/erofs: silence erofs_probe()   Simon Glass
    • [PATCH 1/1] fs/erofs: silence erofs_probe()   Heinrich Schuchardt
• [Bug] Buidling sandbox_vpl_defconfig is unstable   Heinrich Schuchardt
  • [Bug] Buidling sandbox_vpl_defconfig is unstable   Tom Rini
    • [Bug] Buidling sandbox_vpl_defconfig is unstable   Heinrich Schuchardt
      • [Bug] Buidling sandbox_vpl_defconfig is unstable   Tom Rini
      • [Bug] Buidling sandbox_vpl_defconfig is unstable   Simon Glass
• [PATCH v2 0/5] fs/fat: fix handling of full disk   Heinrich Schuchardt
  • [PATCH v2 1/5] fs: fat: finding an empty FAT cluster   Heinrich Schuchardt
  • [PATCH v2 2/5] fs: fat: determine_fatent() error handling   Heinrich Schuchardt
  • [PATCH v2 3/5] fs: fat: carve out fat_create_dir_entry()   Heinrich Schuchardt
  • [PATCH v2 4/5] test: let fs_obj_mkdir() provide full file system type   Heinrich Schuchardt
  • [PATCH v2 5/5] test: add test for full FAT16 directory   Heinrich Schuchardt
• [PATCH] arm: dts: imx8mn-beacon-kit-u-boot: Fix broken booting   Adam Ford
  • [PATCH] arm: dts: imx8mn-beacon-kit-u-boot: Fix broken booting   Michael Nazzareno Trimarchi
    • [PATCH] arm: dts: imx8mn-beacon-kit-u-boot: Fix broken booting   Adam Ford
      • [PATCH] arm: dts: imx8mn-beacon-kit-u-boot: Fix broken booting   Adam Ford
• [PATCH] dm: rtc: Avoid a race in the rtc_reset test   Simon Glass
• [PATCH v3] common: Drop display_options.h from common header   Simon Glass