[PATCH] pmic: pca9450: permit config on all bucks and LDOs

[Jaehoon Chung]

On 6/20/22 12:49, Heiko Thiery wrote:
> In order to have the possibility to configure the regulators at system
> startup through DM support, all LDOs and bucks must be able to be
> changeable. Currently there is a limitation to change the values when
> the output is enabled. Since the driver is based on the ROHM BD71837 and a
> comment that describes a limitation about switching while the output is
> enabled can also be found there, the limitation probably comes from this type.
> 
> Signed-off-by: Heiko Thiery <heiko.thiery at gmail.com>
> Reviewed-by: Fabio Estevam <festevam at denx.de>

Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com>

Best Regards,
Jaehoon Chung

> ---
>  drivers/power/regulator/pca9450.c | 42 ++++++++++---------------------
>  1 file changed, 13 insertions(+), 29 deletions(-)
> 
> diff --git a/drivers/power/regulator/pca9450.c b/drivers/power/regulator/pca9450.c
> index 23badaa332..fe1869397c 100644
> --- a/drivers/power/regulator/pca9450.c
> +++ b/drivers/power/regulator/pca9450.c
> @@ -44,7 +44,6 @@ struct pca9450_vrange {
>   * @ranges:	pointer to ranges of regulator voltages and matching register
>   *		values
>   * @numranges:	number of voltage ranges pointed by ranges
> - * @dvs:	whether the voltage can be changed when regulator is enabled
>   */
>  struct pca9450_plat {
>  	const char		*name;
> @@ -54,7 +53,6 @@ struct pca9450_plat {
>  	u8			volt_mask;
>  	struct pca9450_vrange	*ranges;
>  	unsigned int		numranges;
> -	bool			dvs;
>  };
>  
>  #define PCA_RANGE(_min, _vstep, _sel_low, _sel_hi) \
> @@ -63,11 +61,11 @@ struct pca9450_plat {
>  	.min_sel = (_sel_low), .max_sel = (_sel_hi), \
>  }
>  
> -#define PCA_DATA(_name, enreg, enmask, vreg, vmask, _range, _dvs) \
> +#define PCA_DATA(_name, enreg, enmask, vreg, vmask, _range) \
>  { \
>  	.name = (_name), .enable_reg = (enreg), .enablemask = (enmask), \
>  	.volt_reg = (vreg), .volt_mask = (vmask), .ranges = (_range), \
> -	.numranges = ARRAY_SIZE(_range), .dvs = (_dvs), \
> +	.numranges = ARRAY_SIZE(_range) \
>  }
>  
>  static struct pca9450_vrange pca9450_buck123_vranges[] = {
> @@ -107,39 +105,39 @@ static struct pca9450_plat pca9450_reg_data[] = {
>  	/* Bucks 1-3 which support dynamic voltage scaling */
>  	PCA_DATA("BUCK1", PCA9450_BUCK1CTRL, HW_STATE_CONTROL,
>  		 PCA9450_BUCK1OUT_DVS0, PCA9450_DVS_BUCK_RUN_MASK,
> -		 pca9450_buck123_vranges, true),
> +		 pca9450_buck123_vranges),
>  	PCA_DATA("BUCK2", PCA9450_BUCK2CTRL, HW_STATE_CONTROL,
>  		 PCA9450_BUCK2OUT_DVS0, PCA9450_DVS_BUCK_RUN_MASK,
> -		 pca9450_buck123_vranges, true),
> +		 pca9450_buck123_vranges),
>  	PCA_DATA("BUCK3", PCA9450_BUCK3CTRL, HW_STATE_CONTROL,
>  		 PCA9450_BUCK3OUT_DVS0, PCA9450_DVS_BUCK_RUN_MASK,
> -		 pca9450_buck123_vranges, true),
> +		 pca9450_buck123_vranges),
>  	/* Bucks 4-6 which do not support dynamic voltage scaling */
>  	PCA_DATA("BUCK4", PCA9450_BUCK4CTRL, HW_STATE_CONTROL,
>  		 PCA9450_BUCK4OUT, PCA9450_DVS_BUCK_RUN_MASK,
> -		 pca9450_buck456_vranges, false),
> +		 pca9450_buck456_vranges),
>  	PCA_DATA("BUCK5", PCA9450_BUCK5CTRL, HW_STATE_CONTROL,
>  		 PCA9450_BUCK5OUT, PCA9450_DVS_BUCK_RUN_MASK,
> -		 pca9450_buck456_vranges, false),
> +		 pca9450_buck456_vranges),
>  	PCA_DATA("BUCK6", PCA9450_BUCK6CTRL, HW_STATE_CONTROL,
>  		 PCA9450_BUCK6OUT, PCA9450_DVS_BUCK_RUN_MASK,
> -		 pca9450_buck456_vranges, false),
> +		 pca9450_buck456_vranges),
>  	/* LDOs */
>  	PCA_DATA("LDO1", PCA9450_LDO1CTRL, HW_STATE_CONTROL,
>  		 PCA9450_LDO1CTRL, PCA9450_LDO12_MASK,
> -		 pca9450_ldo1_vranges, false),
> +		 pca9450_ldo1_vranges),
>  	PCA_DATA("LDO2", PCA9450_LDO2CTRL, HW_STATE_CONTROL,
>  		 PCA9450_LDO2CTRL, PCA9450_LDO12_MASK,
> -		 pca9450_ldo2_vranges, false),
> +		 pca9450_ldo2_vranges),
>  	PCA_DATA("LDO3", PCA9450_LDO3CTRL, HW_STATE_CONTROL,
>  		 PCA9450_LDO3CTRL, PCA9450_LDO34_MASK,
> -		 pca9450_ldo34_vranges, false),
> +		 pca9450_ldo34_vranges),
>  	PCA_DATA("LDO4", PCA9450_LDO4CTRL, HW_STATE_CONTROL,
>  		 PCA9450_LDO4CTRL, PCA9450_LDO34_MASK,
> -		 pca9450_ldo34_vranges, false),
> +		 pca9450_ldo34_vranges),
>  	PCA_DATA("LDO5", PCA9450_LDO5CTRL_H, HW_STATE_CONTROL,
>  		 PCA9450_LDO5CTRL_H, PCA9450_LDO5_MASK,
> -		 pca9450_ldo5_vranges, false),
> +		 pca9450_ldo5_vranges),
>  };
>  
>  static int vrange_find_value(struct pca9450_vrange *r, unsigned int sel,
> @@ -246,20 +244,6 @@ static int pca9450_set_value(struct udevice *dev, int uvolt)
>  	unsigned int sel;
>  	int i, found = 0;
>  
> -	/*
> -	 * An under/overshooting may occur if voltage is changed for other
> -	 * regulators but buck 1,2,3 or 4 when regulator is enabled. Prevent
> -	 * change to protect the HW
> -	 */
> -	if (!plat->dvs)
> -		if (pca9450_get_enable(dev)) {
> -			/* If the value is already set, skip the warning. */
> -			if (pca9450_get_value(dev) == uvolt)
> -				return 0;
> -			pr_err("Only DVS bucks can be changed when enabled\n");
> -			return -EINVAL;
> -		}
> -
>  	for (i = 0; i < plat->numranges; i++) {
>  		struct pca9450_vrange *r = &plat->ranges[i];
>