[PATCH v2 32/35] bootstd: Add vbe bootmeth into sandbox

Simon Glass sjg at chromium.org
Sat Jul 30 23:52:34 CEST 2022


Update sandbox to include the VBE bootmeth. Update a few existing tests to
take account of this change, specifically that the new bootmeth now
appears when scanning.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

(no changes since v1)

 arch/sandbox/dts/sandbox.dtsi | 13 ++++++++++
 arch/sandbox/dts/test.dts     | 15 +++++++++++
 test/boot/Makefile            |  4 +++
 test/boot/bootflow.c          | 47 ++++++++++++++++++++++++++++++++---
 test/boot/bootmeth.c          | 25 ++++++++++++++++---
 5 files changed, 96 insertions(+), 8 deletions(-)

diff --git a/arch/sandbox/dts/sandbox.dtsi b/arch/sandbox/dts/sandbox.dtsi
index aa22b8765c8..56e6b38bfa7 100644
--- a/arch/sandbox/dts/sandbox.dtsi
+++ b/arch/sandbox/dts/sandbox.dtsi
@@ -12,6 +12,19 @@
 
 	chosen {
 		stdout-path = "/serial";
+
+		fwupd {
+			compatible = "simple-bus";
+			firmware {
+				compatible = "fwupd,vbe-simple";
+				cur-version = "1.2.3";
+				bootloader-version = "2022.01";
+				storage = "mmc1";
+				area-start = <0x0>;
+				area-size = <0x1000000>;
+				skip-offset = <0x8000>;
+			};
+		};
 	};
 
 	audio: audio-codec {
diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
index d1a8cc7bfb7..2761588f0da 100644
--- a/arch/sandbox/dts/test.dts
+++ b/arch/sandbox/dts/test.dts
@@ -1387,6 +1387,21 @@
 			compatible = "denx,u-boot-fdt-test";
 			reg = <9 1>;
 		};
+
+		fwupd {
+			compatible = "simple-bus";
+			firmware0 {
+				compatible = "fwupd,vbe-simple";
+				storage = "mmc1";
+				area-start = <0x400>;
+				area-size = <0x1000>;
+				skip-offset = <0x200>;
+				state-offset = <0x400>;
+				state-size = <0x40>;
+				version-offset = <0x800>;
+				version-size = <0x100>;
+			};
+		};
 	};
 
 	translation-test at 8000 {
diff --git a/test/boot/Makefile b/test/boot/Makefile
index 1730792b5fa..9e9d5ae21f3 100644
--- a/test/boot/Makefile
+++ b/test/boot/Makefile
@@ -3,3 +3,7 @@
 # Copyright 2021 Google LLC
 
 obj-$(CONFIG_BOOTSTD) += bootdev.o bootstd_common.o bootflow.o bootmeth.o
+
+ifdef CONFIG_OF_LIVE
+obj-$(CONFIG_BOOTMETH_VBE_SIMPLE) += vbe_simple.o
+endif
diff --git a/test/boot/bootflow.c b/test/boot/bootflow.c
index 39c2c33dead..d2c42e8b060 100644
--- a/test/boot/bootflow.c
+++ b/test/boot/bootflow.c
@@ -9,6 +9,7 @@
 #include <common.h>
 #include <bootdev.h>
 #include <bootflow.h>
+#include <bootmeth.h>
 #include <bootstd.h>
 #include <dm.h>
 #include <asm/test.h>
@@ -90,7 +91,7 @@ static int bootflow_cmd_glob(struct unit_test_state *uts)
 	ut_assertok(bootstd_test_drop_bootdev_order(uts));
 
 	console_record_reset_enable();
-	ut_assertok(run_command("bootflow scan -l", 0));
+	ut_assertok(run_command("bootflow scan -lG", 0));
 	ut_assert_nextline("Scanning for bootflows in all bootdevs");
 	ut_assert_nextline("Seq  Method       State   Uclass    Part  Name                      Filename");
 	ut_assert_nextlinen("---");
@@ -122,7 +123,7 @@ static int bootflow_cmd_scan_e(struct unit_test_state *uts)
 	ut_assertok(bootstd_test_drop_bootdev_order(uts));
 
 	console_record_reset_enable();
-	ut_assertok(run_command("bootflow scan -ale", 0));
+	ut_assertok(run_command("bootflow scan -aleG", 0));
 	ut_assert_nextline("Scanning for bootflows in all bootdevs");
 	ut_assert_nextline("Seq  Method       State   Uclass    Part  Name                      Filename");
 	ut_assert_nextlinen("---");
@@ -233,7 +234,7 @@ static int bootflow_iter(struct unit_test_state *uts)
 
 	/* The first device is mmc2.bootdev which has no media */
 	ut_asserteq(-EPROTONOSUPPORT,
-		    bootflow_scan_first(&iter, BOOTFLOWF_ALL, &bflow));
+		    bootflow_scan_first(&iter, BOOTFLOWF_ALL | BOOTFLOWF_SKIP_GLOBAL, &bflow));
 	ut_asserteq(2, iter.num_methods);
 	ut_asserteq(0, iter.cur_method);
 	ut_asserteq(0, iter.part);
@@ -242,7 +243,7 @@ static int bootflow_iter(struct unit_test_state *uts)
 	ut_asserteq(0, bflow.err);
 
 	/*
-	 * This shows MEDIA even though there is none, since int
+	 * This shows MEDIA even though there is none, since in
 	 * bootdev_find_in_blk() we call part_get_info() which returns
 	 * -EPROTONOSUPPORT. Ideally it would return -EEOPNOTSUPP and we would
 	 * know.
@@ -384,6 +385,44 @@ static int bootflow_iter_disable(struct unit_test_state *uts)
 }
 BOOTSTD_TEST(bootflow_iter_disable, UT_TESTF_DM | UT_TESTF_SCAN_FDT);
 
+/* Check 'bootflow scan' with a bootmeth ordering including a global bootmeth */
+static int bootflow_scan_glob_bootmeth(struct unit_test_state *uts)
+{
+	ut_assertok(bootstd_test_drop_bootdev_order(uts));
+
+	/*
+	 * Make sure that the -G flag makes the scan fail, since this is not
+	 * supported when an ordering is provided
+	 */
+	console_record_reset_enable();
+	ut_assertok(bootmeth_set_order("efi firmware0"));
+	ut_assertok(run_command("bootflow scan -lG", 0));
+	ut_assert_nextline("Scanning for bootflows in all bootdevs");
+	ut_assert_nextline(
+		"Seq  Method       State   Uclass    Part  Name                      Filename");
+	ut_assert_nextlinen("---");
+	ut_assert_nextlinen("---");
+	ut_assert_nextline("(0 bootflows, 0 valid)");
+	ut_assert_console_end();
+
+	ut_assertok(run_command("bootflow scan -l", 0));
+	ut_assert_nextline("Scanning for bootflows in all bootdevs");
+	ut_assert_nextline(
+		"Seq  Method       State   Uclass    Part  Name                      Filename");
+	ut_assert_nextlinen("---");
+	ut_assert_nextline("Scanning global bootmeth 'firmware0':");
+	ut_assert_nextline("Scanning bootdev 'mmc2.bootdev':");
+	ut_assert_nextline("Scanning bootdev 'mmc1.bootdev':");
+	ut_assert_nextline("Scanning bootdev 'mmc0.bootdev':");
+	ut_assert_nextline("No more bootdevs");
+	ut_assert_nextlinen("---");
+	ut_assert_nextline("(0 bootflows, 0 valid)");
+	ut_assert_console_end();
+
+	return 0;
+}
+BOOTSTD_TEST(bootflow_scan_glob_bootmeth, UT_TESTF_DM | UT_TESTF_SCAN_FDT);
+
 /* Check 'bootflow boot' to boot a selected bootflow */
 static int bootflow_cmd_boot(struct unit_test_state *uts)
 {
diff --git a/test/boot/bootmeth.c b/test/boot/bootmeth.c
index 5d2e87b1c95..ae216293d64 100644
--- a/test/boot/bootmeth.c
+++ b/test/boot/bootmeth.c
@@ -23,8 +23,9 @@ static int bootmeth_cmd_list(struct unit_test_state *uts)
 	ut_assert_nextlinen("---");
 	ut_assert_nextline("    0    0  syslinux            Syslinux boot from a block device");
 	ut_assert_nextline("    1    1  efi                 EFI boot from an .efi file");
+	ut_assert_nextline(" glob    2  firmware0           VBE simple");
 	ut_assert_nextlinen("---");
-	ut_assert_nextline("(2 bootmeths)");
+	ut_assert_nextline("(3 bootmeths)");
 	ut_assert_console_end();
 
 	return 0;
@@ -56,8 +57,9 @@ static int bootmeth_cmd_order(struct unit_test_state *uts)
 	ut_assert_nextlinen("---");
 	ut_assert_nextline("    0    0  syslinux            Syslinux boot from a block device");
 	ut_assert_nextline("    -    1  efi                 EFI boot from an .efi file");
+	ut_assert_nextline(" glob    2  firmware0           VBE simple");
 	ut_assert_nextlinen("---");
-	ut_assert_nextline("(2 bootmeths)");
+	ut_assert_nextline("(3 bootmeths)");
 	ut_assert_console_end();
 
 	/* Check the -a flag with the reverse order */
@@ -68,8 +70,9 @@ static int bootmeth_cmd_order(struct unit_test_state *uts)
 	ut_assert_nextlinen("---");
 	ut_assert_nextline("    1    0  syslinux            Syslinux boot from a block device");
 	ut_assert_nextline("    0    1  efi                 EFI boot from an .efi file");
+	ut_assert_nextline(" glob    2  firmware0           VBE simple");
 	ut_assert_nextlinen("---");
-	ut_assert_nextline("(2 bootmeths)");
+	ut_assert_nextline("(3 bootmeths)");
 	ut_assert_console_end();
 
 	/* Now reset the order to empty, which should show all of them again */
@@ -77,7 +80,7 @@ static int bootmeth_cmd_order(struct unit_test_state *uts)
 	ut_assert_console_end();
 	ut_assertnull(env_get("bootmeths"));
 	ut_assertok(run_command("bootmeth list", 0));
-	ut_assert_skip_to_line("(2 bootmeths)");
+	ut_assert_skip_to_line("(3 bootmeths)");
 
 	/* Try reverse order */
 	ut_assertok(run_command("bootmeth order \"efi syslinux\"", 0));
@@ -93,6 +96,20 @@ static int bootmeth_cmd_order(struct unit_test_state *uts)
 	ut_asserteq_str("efi syslinux", env_get("bootmeths"));
 	ut_assert_console_end();
 
+	/* Try with global bootmeths */
+	ut_assertok(run_command("bootmeth order \"efi firmware0\"", 0));
+	ut_assert_console_end();
+	ut_assertok(run_command("bootmeth list", 0));
+	ut_assert_nextline("Order  Seq  Name                Description");
+	ut_assert_nextlinen("---");
+	ut_assert_nextline("    0    1  efi                 EFI boot from an .efi file");
+	ut_assert_nextline(" glob    2  firmware0           VBE simple");
+	ut_assert_nextlinen("---");
+	ut_assert_nextline("(2 bootmeths)");
+	ut_assertnonnull(env_get("bootmeths"));
+	ut_asserteq_str("efi firmware0", env_get("bootmeths"));
+	ut_assert_console_end();
+
 	return 0;
 }
 BOOTSTD_TEST(bootmeth_cmd_order, UT_TESTF_DM | UT_TESTF_SCAN_FDT);
-- 
2.37.1.455.g008518b4e5-goog



More information about the U-Boot mailing list