[PATCH 1/3] net: sun8i-emac: Downgrade printf during probe to debug

[Andre Przywara]

On Fri, 15 Jul 2022 00:20:56 -0500
Samuel Holland <samuel at sholland.org> wrote:

> This just prints the PHY mode taken from the devicetree. It does not
> need to be printed during every boot.

That's true, but I think a more important reason is that it spoils the
output, doesn't it? It reads:
Net:   phy interface9
eth0: ethernet at 1c30000
at the moment, but I guess the intention was just:
Net:   eth0: ethernet at 1c30000

So given that, and the fact that "interface9" is not really helpful,
that looks alright to me.

> Signed-off-by: Samuel Holland <samuel at sholland.org>

Reviewed-by: Andre Przywara <andre.przywara at arm.com>

Thanks,
Andre
> ---
> 
>  drivers/net/sun8i_emac.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c
> index 2220f84b6978..a4b3492b7647 100644
> --- a/drivers/net/sun8i_emac.c
> +++ b/drivers/net/sun8i_emac.c
> @@ -857,7 +857,7 @@ static int sun8i_emac_eth_of_to_plat(struct udevice *dev)
>  	priv->phyaddr = fdtdec_get_int(gd->fdt_blob, offset, "reg", -1);
>  
>  	pdata->phy_interface = dev_read_phy_mode(dev);
> -	printf("phy interface%d\n", pdata->phy_interface);
> +	debug("phy interface %d\n", pdata->phy_interface);
>  	if (pdata->phy_interface == PHY_INTERFACE_MODE_NA)
>  		return -EINVAL;
>