[PATCH 5/6] mtd: nand: sunxi: Convert to the driver model
Samuel Holland
samuel at sholland.org
Thu Jul 14 05:15:25 CEST 2022
Clocks, resets, and pinmuxes are now handled by the driver model, so the
only thing the "board" code needs to do is load the driver. This matches
the pattern used by other DM raw NAND drivers (there is no NAND uclass).
The actual board code is now only needed in SPL.
Signed-off-by: Samuel Holland <samuel at sholland.org>
---
board/sunxi/board.c | 5 +-
drivers/mtd/nand/raw/sunxi_nand.c | 81 ++++++++++++++++++-------------
2 files changed, 49 insertions(+), 37 deletions(-)
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 21a2407e062f..ea0f33ed31db 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -315,7 +315,7 @@ int dram_init(void)
return 0;
}
-#if defined(CONFIG_NAND_SUNXI)
+#if defined(CONFIG_NAND_SUNXI) && defined(CONFIG_SPL_BUILD)
static void nand_pinmux_setup(void)
{
unsigned int pin;
@@ -351,9 +351,6 @@ void board_nand_init(void)
{
nand_pinmux_setup();
nand_clock_setup();
-#ifndef CONFIG_SPL_BUILD
- sunxi_nand_init();
-#endif
}
#endif
diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index 7185efbebfdd..dda51a39b065 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -24,11 +24,13 @@
* GNU General Public License for more details.
*/
+#include <clk.h>
#include <common.h>
#include <dm.h>
#include <malloc.h>
#include <memalign.h>
#include <nand.h>
+#include <reset.h>
#include <dm/device_compat.h>
#include <dm/devres.h>
#include <linux/bitops.h>
@@ -260,7 +262,7 @@ static inline struct sunxi_nand_chip *to_sunxi_nand(struct nand_chip *nand)
* NAND Controller structure: stores sunxi NAND controller information
*
* @controller: base controller structure
- * @dev: parent device (used to print error messages)
+ * @dev: DM device (used to print error messages)
* @regs: NAND controller registers
* @ahb_clk: NAND Controller AHB clock
* @mod_clk: NAND Controller mod clock
@@ -273,7 +275,7 @@ static inline struct sunxi_nand_chip *to_sunxi_nand(struct nand_chip *nand)
*/
struct sunxi_nfc {
struct nand_hw_control controller;
- struct device *dev;
+ struct udevice *dev;
void __iomem *regs;
struct clk *ahb_clk;
struct clk *mod_clk;
@@ -1772,54 +1774,67 @@ static void sunxi_nand_chips_cleanup(struct sunxi_nfc *nfc)
}
#endif /* __UBOOT__ */
-void sunxi_nand_init(void)
+static int sunxi_nand_probe(struct udevice *dev)
{
- struct sunxi_nfc *nfc;
- phys_addr_t regs;
- ofnode node;
+ struct sunxi_nfc *nfc = dev_get_priv(dev);
+ struct reset_ctl_bulk rst_bulk;
+ struct clk_bulk clk_bulk;
int ret;
- nfc = kzalloc(sizeof(*nfc), GFP_KERNEL);
- if (!nfc)
- return;
-
+ nfc->dev = dev;
spin_lock_init(&nfc->controller.lock);
init_waitqueue_head(&nfc->controller.wq);
INIT_LIST_HEAD(&nfc->chips);
- node = ofnode_by_compatible(ofnode_null(), "allwinner,sun4i-a10-nand");
- if (!ofnode_valid(node)) {
- pr_err("unable to find nfc node in device tree\n");
- goto err;
- }
-
- if (!ofnode_is_enabled(node)) {
- pr_err("nfc disabled in device tree\n");
- goto err;
- }
+ nfc->regs = dev_read_addr_ptr(dev);
+ if (!nfc->regs)
+ return -EINVAL;
- regs = ofnode_get_addr(node);
- if (regs == FDT_ADDR_T_NONE) {
- pr_err("unable to find nfc address in device tree\n");
- goto err;
- }
+ ret = reset_get_bulk(dev, &rst_bulk);
+ if (!ret)
+ reset_deassert_bulk(&rst_bulk);
- nfc->regs = (void *)regs;
+ ret = clk_get_bulk(dev, &clk_bulk);
+ if (!ret)
+ clk_enable_bulk(&clk_bulk);
ret = sunxi_nfc_rst(nfc);
if (ret)
- goto err;
+ return ret;
- ret = sunxi_nand_chips_init(node, nfc);
+ ret = sunxi_nand_chips_init(dev_ofnode(dev), nfc);
if (ret) {
- dev_err(nfc->dev, "failed to init nand chips\n");
- goto err;
+ dev_err(dev, "failed to init nand chips\n");
+ return ret;
}
- return;
+ return 0;
+}
-err:
- kfree(nfc);
+static const struct udevice_id sunxi_nand_ids[] = {
+ {
+ .compatible = "allwinner,sun4i-a10-nand",
+ },
+ { }
+};
+
+U_BOOT_DRIVER(sunxi_nand) = {
+ .name = "sunxi_nand",
+ .id = UCLASS_MTD,
+ .of_match = sunxi_nand_ids,
+ .probe = sunxi_nand_probe,
+ .priv_auto = sizeof(struct sunxi_nfc),
+};
+
+void board_nand_init(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ ret = uclass_get_device_by_driver(UCLASS_MTD,
+ DM_DRIVER_GET(sunxi_nand), &dev);
+ if (ret && ret != -ENODEV)
+ pr_err("Failed to initialize sunxi NAND controller: %d\n", ret);
}
MODULE_LICENSE("GPL v2");
--
2.35.1
More information about the U-Boot
mailing list