[PATCH 2/2] rockchip: rk3399: fix incorrect ifdef check on SPL_GPIO

[Philipp Tomsich]

On Tue, 12 Jul 2022 at 17:38, Quentin Schulz <foss+uboot at 0leil.net> wrote:
>
> From: Quentin Schulz <quentin.schulz at theobroma-systems.com>
>
> The check to perform is on CONFIG_SPL_GPIO and not SPL_GPIO.
> Because this was never compiled in, it missed an include of cru.h that
> was not detected before. Let's include it too.
>
> Fixes: 07586ee4322a ("rockchip: rk3399: Support common spl_board_init")
> Cc: Quentin Schulz <foss+uboot at 0leil.net>
> Signed-off-by: Quentin Schulz <quentin.schulz at theobroma-systems.com>
> ---
>  arch/arm/mach-rockchip/rk3399/rk3399.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c
> index ad274b66ce..6d30b70565 100644
> --- a/arch/arm/mach-rockchip/rk3399/rk3399.c
> +++ b/arch/arm/mach-rockchip/rk3399/rk3399.c
> @@ -221,7 +221,9 @@ void spl_perform_fixups(struct spl_image_info *spl_image)
>                            "u-boot,spl-boot-device", boot_ofpath);
>  }
>
> -#if defined(SPL_GPIO)
> +#if defined(CONFIG_SPL_GPIO)

#if IS_ENABLED(…)

> +
> +#include <asm/arch-rockchip/cru.h>
>  static void rk3399_force_power_on_reset(void)
>  {
>         ofnode node;
> @@ -253,7 +255,7 @@ void spl_board_init(void)
>  {
>         led_setup();
>
> -#if defined(SPL_GPIO)
> +#if defined(CONFIG_SPL_GPIO)

if (IS_ENABLED(…)) { }

>         struct rockchip_cru *cru = rockchip_get_cru();
>
>         /*
> --
> 2.36.1
>