[PATCH v2] doc: board: amlogic: add documentation on boot flow
Neil Armstrong
narmstrong at baylibre.com
Wed Jul 6 11:36:49 CEST 2022
This is a preliminary documentation introducing different
boot sequences, and notably the recovery mode.
Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
---
Changes since v1:
- Christian Hewitt did an overall grammar correction of the text, meaning
of the text hasn't changed, thus I kept the Reviewed-by tags
doc/board/amlogic/boot-flow.rst | 134 ++++++++++++++++++++++++++++++++
doc/board/amlogic/index.rst | 1 +
2 files changed, 135 insertions(+)
create mode 100644 doc/board/amlogic/boot-flow.rst
diff --git a/doc/board/amlogic/boot-flow.rst b/doc/board/amlogic/boot-flow.rst
new file mode 100644
index 0000000000..1ca81f3c89
--- /dev/null
+++ b/doc/board/amlogic/boot-flow.rst
@@ -0,0 +1,134 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Amlogic SoC Boot Flow
+=====================
+
+The Amlogic SoCs have a pre-defined boot sequence in the SoC ROM code. Here are
+the possible boot sources of different SoC families supported by U-Boot:
+
+GX* & AXG family
+----------------
+
++----------+--------------------+-------+-------+---------------+---------------+
+| | 1 | 2 | 3 | 4 | 5 |
++==========+====================+=======+=======+===============+===============+
+| S905 | POC=0: SPI NOR | eMMC | NAND | SD Card | USB Device |
+| S905X | | | | | |
+| S905L | | | | | |
+| S905W | | | | | |
+| S912 | | | | | |
++----------+--------------------+-------+-------+---------------+---------------+
+| S805X | POC=0: SPI NOR | eMMC | NAND | USB Device | - |
+| A113D | | | | | |
+| A113X | | | | | |
++----------+--------------------+-------+-------+---------------+---------------+
+
+POC pin: `NAND_CLE`
+
+Some boards provide a button to force USB BOOT which disables the eMMC clock signal
+to bypass the eMMC stage. Others have removable eMMC modules; removing the eMMC and
+SDCard will allow boot from USB.
+
+An exception is the lafrite board (aml-s805x-xx) which has no SDCard slot and boots
+from SPI. The only ways to boot the lafrite board from USB are:
+
+ - Erase the first sectors of SPI NOR flash
+ - Insert an HDMI boot plug forcing boot over USB
+
+The VIM1 and initial VIM2 boards provide a test point on the eMMC signals to block
+the storage from answering and continue to the next boot step.
+
+The USB Device boot uses the first USB interface. On some boards this port is only
+available on an USB-A type connector and needs an special Type-A to Type-A cable to
+communicate with the BootROM.
+
+G12* & SM1 family
+-----------------
+
++-------+-------+-------+---------------+---------------+---------------+---------------+
+| POC0 | POC1 | POC2 | 1 | 2 | 3 | 4 |
++=======+=======+=======+===============+===============+===============+===============+
+| 0 | 0 | 0 | USB Device | SPI NOR | NAND/eMMC | SDCard |
++-------+-------+-------+---------------+---------------+---------------+---------------+
+| 0 | 0 | 1 | USB Device | NAND/eMMC | SDCard | - |
++-------+-------+-------+---------------+---------------+---------------+---------------+
+| 0 | 1 | 0 | SPI NOR | NAND/eMMC | SDCard | USB Device |
++-------+-------+-------+---------------+---------------+---------------+---------------+
+| 0 | 1 | 1 | SPI NAND | NAND/eMMC | USB Device | - |
++-------+-------+-------+---------------+---------------+---------------+---------------+
+| 1 | 0 | 0 | USB Device | SPI NOR | NAND/eMMC | SDCard |
++-------+-------+-------+---------------+---------------+---------------+---------------+
+| 1 | 0 | 1 | USB Device | NAND/eMMC | SDCard | - |
++-------+-------+-------+---------------+---------------+---------------+---------------+
+| 1 | 1 | 0 | SPI NOR | NAND/eMMC | SDCard | USB Device |
++-------+-------+-------+---------------+---------------+---------------+---------------+
+| 1 | 1 | 1 | NAND/eMMC | SDCard | USB Device | - |
++-------+-------+-------+---------------+---------------+---------------+---------------+
+
+The last option (1/1/1) is the normal default seen on production devices.
+
+ * POC0 pin: `BOOT_4` (0 and all other 1 means SPI NAND boot first)
+ * POC1 pin: `BOOT_5` (0 and all other 1 means USB Device boot first
+ * POC2 pin: `BOOT_6` (0 and all other 1 means SPI NOR boot first)
+
+Most boards provide a button to force USB BOOT which lowers `BOOT_5` to 0. Some boards
+provide a test point on the eMMC or SPI NOR clock signals to block the storage from
+answering and continue to the next boot step.
+
+The Khadas VIM3/3L boards embed a microcontroller which sets POC signals according
+to its configuration or a specific key press sequence to either boot from SPI NOR
+or eMMC then SDCard, or boot as an USB Device.
+
+The Odroid N2/N2+ has a hardware switch to select between SPI NOR or eMMC boot.
+
+Boot Modes
+----------
+
+ * SDCard
+
+The BootROM fetches the first SDCard sectors in one sequence, then checks the content
+of the data. The BootROM expects to find the FIP binary in sector 1, 512 bytes offset
+from the start.
+
+ * eMMC
+
+The BootROM fetches the first sectors in one sequence, first on the main partition,
+and then on the Boot0 followed by Boot1 HW partitions. After each read, the BootROM
+checks the data and looks to the next partition if it fails. The BootROM expects to
+find the FIP binary in sector 1, 512 bytes offset from the start.
+
+ * SPI NOR
+
+The BootROM fetches the first SPI NOR sectors in one sequence, then checks the content
+of the data. The BootROM expects to find the FIP binary in sector 1, 512 bytes offset
+from the start.
+
+ * NAND & SPI NAND
+
+These modes are rarely used in open platforms and no details are available.
+
+ * USB Device
+
+The BootROM sets the USB Gadget interface to serve a custom USB protocol with the
+USB ID 1b8e:c003. The Amlogic `update` utility is designed to use this protocol. It
+is also implemented in the Amlogic Vendor U-Boot.
+
+The open-source `pyamlboot` utility https://github.com/superna9999/pyamlboot also
+implements this protocol and can load U-Boot in memory in order to start the SoC
+without any attached storage or to recover from a failed/incorrect image flash.
+
+HDMI Recovery
+-------------
+
+The BootROM also briefly reads 8 bytes at address I2C 0x52 offset 0xf8 (248) on the
+HDMI DDC bus. If the content is `boot at USB` it will force USB boot mode. If the content
+is `boot at SDC` it will force SDCard boot mode.
+
+If USB Device doesn't enumerate or SD Card boot step doesn't work, the BootROM will
+continue with the normal boot sequence.
+
+Special boot dongles can be built by connecting a 256bytes EEPROM set to answer on
+address 0x52, and program `boot at USB` or `boot at SDC` at offset 0xf8 (248).
+
+Note: If the SoC is booted with USB Device forced at first step, it will keep the boot
+order on warm reboot. Only cold reboot (power removed) will reset the boot order.
diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst
index 9c7fadf2c0..8b9f1e2e1d 100644
--- a/doc/board/amlogic/index.rst
+++ b/doc/board/amlogic/index.rst
@@ -81,6 +81,7 @@ Boot Documentation
:maxdepth: 1
pre-generated-fip
+ boot-flow
Board Documentation
-------------------
--
2.25.1
More information about the U-Boot
mailing list