[PATCH v2 2/2] rockchip: rk3399: remove duplicate call to regulators_enable_boot_on

[Quentin Schulz]

From: Quentin Schulz <quentin.schulz at theobroma-systems.com>

An earlier commit makes the common SPL code call
regulators_enable_boot_on and regulators_enable_boot_off before
iterating over possible boot media for U-Boot proper. There is therefore
no need to do this in the rk3399-specific code, so let's remove it.

Cc: Quentin Schulz <foss+uboot at 0leil.net>
Tested-by: Xavier Drudis Ferran <xdrudis at tinet.cat>
Signed-off-by: Quentin Schulz <quentin.schulz at theobroma-systems.com>
---

This patch depends on:
 - https://lore.kernel.org/u-boot/20220722093014.3850165-1-foss+uboot@0leil.net/
 - https://lore.kernel.org/u-boot/20220722093014.3850165-2-foss+uboot@0leil.net/

v2:
 - added Tested-by,

 arch/arm/mach-rockchip/rk3399/rk3399.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c
index fc1acaf4bd..94d0fa58c4 100644
--- a/arch/arm/mach-rockchip/rk3399/rk3399.c
+++ b/arch/arm/mach-rockchip/rk3399/rk3399.c
@@ -280,15 +280,5 @@ void spl_board_init(void)
 		if (cru->glb_rst_st != 0)
 			rk3399_force_power_on_reset();
 	}
-
-	if (IS_ENABLED(CONFIG_SPL_DM_REGULATOR)) {
-		/*
-		 * Turning the eMMC and SPI back on (if disabled via the Qseven
-		 * BIOS_ENABLE) signal is done through a always-on regulator).
-		 */
-		if (regulators_enable_boot_on(false))
-			debug("%s: Cannot enable boot on regulator\n",
-			      __func__);
-	}
 }
 #endif
-- 
2.37.1