[PATCH 09/12] rockchip: puma-rk3399: migrate to TPL

Quentin Schulz foss+uboot at 0leil.net
Fri Jul 22 18:06:52 CEST 2022


From: Quentin Schulz <quentin.schulz at theobroma-systems.com>

Depending on the toolchain used to compile the SPL for Puma RK3399-Q7
module, the board does not boot because the resulting binary is too big
to fit in SRAM.

Let's add a TPL so that there's no need to fiddle with or hack the
defconfig to have a working bootloader.

This follows what's been done for the majority of other RK3399-based
boards.

See the original commit for the first migrations:
bdc00080111f "rockchip: rk3399: update defconfig for TPL"

Unfortunately, the offset in SPI-NOR for U-Boot proper needs to be
modified, since the move from SPL to TPL+SPL for idbloader.img (and the
"only the first 2KB per 4KB blocks are written" "hack" for rkspi format)
increased the size above 256KB. Let's move it to 512KB to, hopefully, be
safe.

Cc: Quentin Schulz <foss+uboot at 0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz at theobroma-systems.com>
---
 arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi | 2 +-
 board/theobroma-systems/puma_rk3399/README  | 8 ++++----
 configs/puma-rk3399_defconfig               | 4 ++--
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi b/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi
index 5dc345bbe8..27a792fe6d 100644
--- a/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi
@@ -14,7 +14,7 @@
 
 / {
 	config {
-		u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */
+		u-boot,spl-payload-offset = <0x80000>; /* @ 512KB */
 		u-boot,mmc-env-offset = <0x4000>;      /* @  16KB */
 		u-boot,efi-partition-entries-offset = <0x200000>; /* 2MB */
 		u-boot,boot-led = "module_led";
diff --git a/board/theobroma-systems/puma_rk3399/README b/board/theobroma-systems/puma_rk3399/README
index 254c3bbe96..550bdfb1f4 100644
--- a/board/theobroma-systems/puma_rk3399/README
+++ b/board/theobroma-systems/puma_rk3399/README
@@ -51,13 +51,13 @@ The SPL image for SD-Card/eMMC is readily available in idbloader.img at the
 root of U-Boot after compilation.
 
 Creating an SPL image for SPI-NOR:
-  > tools/mkimage -n rk3399 -T rkspi -d spl/u-boot-spl.bin idbloader-spi.img
+  > tools/mkimage -n rk3399 -T rkspi -d tpl/u-boot-tpl.bin:spl/u-boot-spl.bin idbloader-spi.img
 
 Flash the image
 ===============
 
-Copy the SPL to offset 32k for SD/eMMC, offset 0 for NOR-Flash and the FIT
-image to offset 256k.
+Copy the SPL to offset 32k and the FIT image to offset 256k for SD/eMMC.
+Copy the SPL to offset 0 and the FIT image to offset 512k for NOR-Flash.
 
 SD-Card
 -------
@@ -98,4 +98,4 @@ help of the Rockchip loader binary.
   > ./rkdeveloptool db rkbin/rk3399_loader_spinor_v1.25.114.bin
   > ./rkdeveloptool ef
   > ./rkdeveloptool wl 0 ../idbloader-spi.img
-  > ./rkdeveloptool wl 512 ../u-boot.itb
+  > ./rkdeveloptool wl 1024 ../u-boot.itb
diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
index 3567cd078b..c70dbe9ed5 100644
--- a/configs/puma-rk3399_defconfig
+++ b/configs/puma-rk3399_defconfig
@@ -7,7 +7,6 @@ CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3399-puma-haikou"
-CONFIG_SPL_TEXT_BASE=0xff8c2000
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_ROCKCHIP_BOOT_MODE_REG=0x0
 CONFIG_TARGET_PUMA_RK3399=y
@@ -22,11 +21,12 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_MISC_INIT_R=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
 CONFIG_SPL_SPI_LOAD=y
+CONFIG_TPL=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
-- 
2.37.1



More information about the U-Boot mailing list