[PATCH] imx8mq_phanbell: Remove custom CONFIG_SYS_MALLOC_F_LEN

[Fabio Estevam]

From: Fabio Estevam <festevam at denx.de>

Currently, the imx8mq_phanbell board fails to boot.

Remove the custom CONFIG_SYS_MALLOC_F_LEN setting in favor of the
generic one done via the main Kconfig.

Since commit b598957206e5 ("Kconfig: Fix SYS_MALLOC_F_LEN for i.MX8MQ")
the default SYS_MALLOC_F_LEN value for i.MX8MQ is 0x2000.

With such default value, the board boots again.

Signed-off-by: Fabio Estevam <festevam at denx.de>
---
Hi Tom,

Maybe you could pick this one directly for the 2022.07 release
to fix the boot regression?

Thanks

 configs/imx8mq_phanbell_defconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/configs/imx8mq_phanbell_defconfig b/configs/imx8mq_phanbell_defconfig
index 095e42e6ba18..1cf58937fe52 100644
--- a/configs/imx8mq_phanbell_defconfig
+++ b/configs/imx8mq_phanbell_defconfig
@@ -2,7 +2,6 @@ CONFIG_ARM=y
 CONFIG_ARCH_IMX8M=y
 CONFIG_SYS_TEXT_BASE=0x40200000
 CONFIG_SYS_MALLOC_LEN=0x600000
-CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-- 
2.25.1