[PATCH v2 0/8] Add support for the i.MXRT1170
Stefano Babic
sbabic at denx.de
Mon Jul 25 15:34:50 CEST 2022
Hi Jesse,
I get errors as soon as I merge the series:
https://source.denx.de/u-boot/custodians/u-boot-imx/-/jobs/471284
In fact, you add new CONFIG_ but not via Kbuild:
CONFIG_SPL_STACK
CONFIG_SYS_FSL_ERRATUM_ESDHC135
Check this job, too:
https://source.denx.de/u-boot/custodians/u-boot-imx/-/jobs/471287
Best regards,
Stefano
On 17.06.22 18:42, Jesse Taube wrote:
> This patchset contains:
> - i.MXRT1170 clock driver adaption
> - i.MXRT1170-evk basic support
>
> Jesse Taube (8):
> imx: imxrt1170-evk: Add support for the NXP i.MXRT1170-EVK
> ARM: dts: imxrt11170-pinfunc: Add pinctrl binding header
> dt-bindings: imx: Add clock binding for i.MXRT1170
> clk: imx: Add i.MXRT11xx pllv3 variant
> clk: imx: Add initial support for i.MXRT1170 clock driver
> RAM: Add changes for i.MXRT11xx series
> ARM: dts: imx: add i.MXRT1170-EVK support
> ARM: imxrt1170_defconfig: Add i.MXRT1170 defconfig
>
> arch/arm/dts/Makefile | 3 +-
> arch/arm/dts/imxrt1170-evk-u-boot.dtsi | 94 +
> arch/arm/dts/imxrt1170-evk.dts | 250 +++
> arch/arm/dts/imxrt1170-pinfunc.h | 1561 +++++++++++++++++
> arch/arm/dts/imxrt1170.dtsi | 257 +++
> arch/arm/include/asm/arch-imx/cpu.h | 1 +
> arch/arm/mach-imx/imxrt/Kconfig | 9 +
> arch/arm/mach-imx/imxrt/soc.c | 2 +
> board/freescale/imxrt1170-evk/Kconfig | 22 +
> board/freescale/imxrt1170-evk/MAINTAINERS | 7 +
> board/freescale/imxrt1170-evk/Makefile | 6 +
> board/freescale/imxrt1170-evk/imximage.cfg | 32 +
> board/freescale/imxrt1170-evk/imxrt1170-evk.c | 80 +
> configs/imxrt1170-evk_defconfig | 67 +
> drivers/clk/imx/Kconfig | 16 +
> drivers/clk/imx/Makefile | 1 +
> drivers/clk/imx/clk-imxrt1170.c | 221 +++
> drivers/clk/imx/clk-pllv3.c | 56 +-
> drivers/clk/imx/clk.h | 1 +
> drivers/ram/imxrt_sdram.c | 9 +
> include/configs/imxrt1170-evk.h | 37 +
> include/dt-bindings/clock/imxrt1170-clock.h | 48 +
> include/dt-bindings/memory/imxrt-sdram.h | 1 +
> 23 files changed, 2777 insertions(+), 4 deletions(-)
> create mode 100644 arch/arm/dts/imxrt1170-evk-u-boot.dtsi
> create mode 100644 arch/arm/dts/imxrt1170-evk.dts
> create mode 100644 arch/arm/dts/imxrt1170-pinfunc.h
> create mode 100644 arch/arm/dts/imxrt1170.dtsi
> create mode 100644 board/freescale/imxrt1170-evk/Kconfig
> create mode 100644 board/freescale/imxrt1170-evk/MAINTAINERS
> create mode 100644 board/freescale/imxrt1170-evk/Makefile
> create mode 100644 board/freescale/imxrt1170-evk/imximage.cfg
> create mode 100644 board/freescale/imxrt1170-evk/imxrt1170-evk.c
> create mode 100644 configs/imxrt1170-evk_defconfig
> create mode 100644 drivers/clk/imx/clk-imxrt1170.c
> create mode 100644 include/configs/imxrt1170-evk.h
> create mode 100644 include/dt-bindings/clock/imxrt1170-clock.h
>
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list