[PATCH v2 04/11] rockchip: idb: add info and stop command
Johan Jonker
jbx6244 at gmail.com
Sat Jul 9 20:49:38 CEST 2022
Add info and stop command to become aware of what goes on
inside the driver and to release some resources.
Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
---
optional
---
arch/arm/mach-rockchip/rockchip_idb.c | 116 ++++++++++++++++++++++++++
1 file changed, 116 insertions(+)
diff --git a/arch/arm/mach-rockchip/rockchip_idb.c b/arch/arm/mach-rockchip/rockchip_idb.c
index 832b3251..0692ce1a 100644
--- a/arch/arm/mach-rockchip/rockchip_idb.c
+++ b/arch/arm/mach-rockchip/rockchip_idb.c
@@ -1456,10 +1456,124 @@ int rk_idb_start(void)
#if !defined(CONFIG_SPL_BUILD)
+int rk_idb_stop(void)
+{
+ struct udevice *bdev;
+ int ret;
+
+ ret = blk_find_device(IF_TYPE_RK_IDB, 0, &bdev);
+ if (ret) {
+ printf("no IDB blk device found\n");
+ return 0;
+ }
+
+ device_remove(bdev, DM_REMOVE_NORMAL);
+ device_unbind(bdev);
+
+ return 0;
+}
+
+void rk_idb_print_idb_data(u32 *data)
+{
+ struct sector0 *sec0 = (struct sector0 *)data;
+
+ printf("\n");
+
+ printf("magic : %08x\n"
+ "rc4_flag : %08x\n"
+ "boot_code1_offset: %d\n"
+ "flash_data_size : %d\n"
+ "flash_boot_size : %d\n",
+ sec0->magic,
+ sec0->rc4_flag,
+ sec0->boot_code1_offset,
+ sec0->flash_data_size,
+ sec0->flash_boot_size);
+
+ printf("\n");
+}
+
+static int rk_idb_info(void)
+{
+ struct rk_idb *plat;
+ struct udevice *dev;
+ u32 data[512];
+ u32 spare[2];
+ int ret;
+ int i, j;
+
+ ret = uclass_find_device(UCLASS_RK_IDB, 0, &dev);
+ if (ret) {
+ printf("no IDB device found\n");
+ return CMD_RET_FAILURE;
+ }
+
+ if (!device_active(dev)) {
+ printf("IDB device present but not probed\n");
+ return CMD_RET_FAILURE;
+ }
+
+ plat = dev_get_plat(dev);
+
+ printf("\n##### HARDWARE #####\n");
+
+ printf("REG : 0x%08x\n", (u32)plat->regs);
+
+ printf("FLASH ID : %02x %02x %02x %02x %02x %02x\n",
+ plat->info->nand_id[0],
+ plat->info->nand_id[1],
+ plat->info->nand_id[2],
+ plat->info->nand_id[3],
+ plat->info->nand_id[4],
+ plat->info->nand_id[5]);
+
+ printf("page_per_blk : %d\n", plat->info->page_per_blk);
+ printf("lsb_mode : %d\n", plat->info->lsb_mode);
+ printf("randomizer : %d\n", (plat->info->operation_opt >> 7) & 1);
+
+ printf("\n##### BLOCK DEVICE #####\n");
+
+ ret = blk_find_device(IF_TYPE_RK_IDB, 0, &dev);
+ if (ret) {
+ printf("no IDB blk device found\n");
+ } else {
+ struct blk_desc *blk_dev = dev_get_uclass_plat(dev);
+
+ printf("blocks : %lu\n", (unsigned long)blk_dev->lba);
+ }
+
+ printf("uuid_part_str : %s\n", plat->uuid_part_str);
+ printf("uuid_disk_str : %s\n", plat->uuid_disk_str);
+
+ printf("\n##### IDB #####\n");
+ for (i = 0; i < plat->blk_counter; i++) {
+ rk_idb_read_block(plat, j, 4, data, spare);
+
+ for (j = 0; j < 4; j++) {
+ if (j != 1)
+ rk_idb_rc4((char *)data + j * 512, 512);
+ }
+
+ printf("\nblk : %d\n", plat->idblock[i].blk);
+ printf("ecc : %d\n", plat->idblock[i].ecc);
+ printf("sectors : %d\n", plat->idblock[i].sectors);
+
+ rk_idb_print_idb_data(data);
+ }
+
+ return 0;
+}
+
static int rk_idb_do(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[])
{
if (argc == 2) {
+ if (!strcmp(argv[1], "info"))
+ return rk_idb_info();
+
+ if (!strcmp(argv[1], "stop"))
+ return rk_idb_stop();
+
if (!strcmp(argv[1], "start"))
return rk_idb_start();
}
@@ -1471,6 +1585,8 @@ U_BOOT_CMD(
idb, 5, 1, rk_idb_do,
"Rockchip IDB block device",
"start - start IDB device\n"
+ "idb stop - stop IDB blk device\n"
+ "idb info - show IDB device info\n"
);
#endif
--
2.20.1
More information about the U-Boot
mailing list