[PATCH] board: stm32mp1: remove test on CONFIG_DM_REGULATOR
Patrice CHOTARD
patrice.chotard at foss.st.com
Thu Jul 7 08:51:13 CEST 2022
Hi Patrick
On 6/20/22 12:36, Patrick Delaunay wrote:
> The tests on CONFIG_DM_REGULATOR, added to avoid compilation issues, can
> now be removed, they are no more needed since the commit 16cc5ad0b439
> ("power: regulator: add dummy helper").
>
> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
>
> board/st/stm32mp1/stm32mp1.c | 8 ++------
> 1 file changed, 2 insertions(+), 6 deletions(-)
>
> diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
> index 9496890d164..8c162b42a59 100644
> --- a/board/st/stm32mp1/stm32mp1.c
> +++ b/board/st/stm32mp1/stm32mp1.c
> @@ -494,7 +494,7 @@ static void sysconf_init(void)
> ret = uclass_get_device_by_driver(UCLASS_PMIC,
> DM_DRIVER_GET(stm32mp_pwr_pmic),
> &pwr_dev);
> - if (!ret && IS_ENABLED(CONFIG_DM_REGULATOR)) {
> + if (!ret) {
> ret = uclass_get_device_by_driver(UCLASS_MISC,
> DM_DRIVER_GET(stm32mp_bsec),
> &dev);
> @@ -555,9 +555,6 @@ static int board_stm32mp15x_dk2_init(void)
> struct gpio_desc hdmi, audio;
> int ret = 0;
>
> - if (!IS_ENABLED(CONFIG_DM_REGULATOR))
> - return -ENODEV;
> -
> /* Fix to make I2C1 usable on DK2 for touchscreen usage in kernel */
> node = ofnode_path("/soc/i2c at 40012000/hdmi-transmitter at 39");
> if (!ofnode_valid(node)) {
> @@ -658,8 +655,7 @@ int board_init(void)
> if (board_is_stm32mp15x_dk2())
> board_stm32mp15x_dk2_init();
>
> - if (IS_ENABLED(CONFIG_DM_REGULATOR))
> - regulators_enable_boot_on(_DEBUG);
> + regulators_enable_boot_on(_DEBUG);
>
> /*
> * sysconf initialisation done only when U-Boot is running in secure
Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>
Thanks
Patrice
More information about the U-Boot
mailing list