[PATCH v2 05/10] ARM: dts: stm32mp13: activate led on STM32MP13F-DK

Patrice CHOTARD patrice.chotard at foss.st.com
Thu Jul 7 09:39:16 CEST 2022


Hi Patrick

On 6/30/22 10:20, Patrick Delaunay wrote:
> Activate the led managed in stm32mp1 board for U-Boot indication
> in STM32MP13F-DK device tree.
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
> 
> (no changes since v1)
> 
>  arch/arm/dts/stm32mp135f-dk-u-boot.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm/dts/stm32mp135f-dk-u-boot.dtsi b/arch/arm/dts/stm32mp135f-dk-u-boot.dtsi
> index dfe5bbb2e34..cbe4eb56083 100644
> --- a/arch/arm/dts/stm32mp135f-dk-u-boot.dtsi
> +++ b/arch/arm/dts/stm32mp135f-dk-u-boot.dtsi
> @@ -11,8 +11,18 @@
>  	};
>  
>  	config {
> +		u-boot,boot-led = "led-blue";
> +		u-boot,error-led = "led-red";
>  		u-boot,mmc-env-partition = "u-boot-env";
>  	};
> +
> +	leds {
> +		led-red {
> +			color = <LED_COLOR_ID_RED>;
> +			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
> +			default-state = "off";
> +		};
> +	};
>  };
>  
>  &uart4 {

Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>

Thanks
Patrice


More information about the U-Boot mailing list