[PATCH V2 01/49] spl: imx8mm: enlarge SPL_MAX_SIZE

[Peng Fan]

On 6/29/2022 6:09 PM, Frieder Schrempf wrote:
> Am 27.06.22 um 05:24 schrieb Peng Fan (OSS):
>> From: Peng Fan <peng.fan at nxp.com>
>>
>> The CONFIG_SPL_MAX_SIZE could be 0x27000 for i.MX8MM when SPL_TEXT_BASE
>> set to 0x7E1000.
>>
>> Signed-off-by: Peng Fan <peng.fan at nxp.com>
>> ---
>>   common/spl/Kconfig                            | 1 +
>>   configs/imx8mm-cl-iot-gate-optee_defconfig    | 1 -
>>   configs/imx8mm-cl-iot-gate_defconfig          | 1 -
>>   configs/imx8mm-icore-mx8mm-ctouch2_defconfig  | 1 -
>>   configs/imx8mm-icore-mx8mm-edimm2.2_defconfig | 1 -
>>   configs/imx8mm-mx8menlo_defconfig             | 1 -
>>   configs/imx8mm_beacon_defconfig               | 1 -
>>   configs/imx8mm_data_modul_edm_sbc_defconfig   | 1 -
>>   configs/imx8mm_evk_defconfig                  | 1 -
>>   configs/imx8mm_venice_defconfig               | 1 -
>>   configs/phycore-imx8mm_defconfig              | 1 -
>>   configs/verdin-imx8mm_defconfig               | 1 -
>>   12 files changed, 1 insertion(+), 11 deletions(-)
> 
> Is there any reason, why you didn't include kontron-sl-mx8mm_defconfig
> in this patch?

No specific reason. I may overlook kontron-sl-mx8mm_defconfig,
but it not matter. The reason I did this patch, is a few boards
reached its size limitation, so I enlarge to avoid build break.

keep kontron-sl-mx8mm_defconfig as 0x25000 or move to 0x27000,
both are ok. If you wanna enlarge, please do a new patch,
I not wanna respin this large patchset, unless there are some
major comments.

Thanks,
Peng.