[PATCH] arm: dts: mt7622: remove default pinctrl of uart0

Tom Rini trini at konsulko.com
Mon Jul 25 23:22:12 CEST 2022

On Wed, Jul 13, 2022 at 11:16:39AM +0800, Weijie Gao wrote:

> Currently u-boot running on mt7622 will print an warning log at beginning:
> > serial_mtk serial at 11002000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19
> It turns out that the pinctrl uclass can't work properly in board_f stage.
> Since the uart0 is the default UART device used by bootrom, and will be
> initialized in both bootrom and tf-a bl2. It's ok not to setup pinctrl for
> uart0 in u-boot.
> This patch removes the default pinctrl of uart0 to suppress the unwanted
> warning.
> Signed-off-by: Weijie Gao <weijie.gao at mediatek.com>

Applied to u-boot/master, thanks!

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20220725/1b42592d/attachment.sig>

More information about the U-Boot mailing list