[PATCH 8/8] arm: mvebu: turris_omnia: Enable a38x pinctrl and gpio support

[Pali Rohár]

On Thursday 28 July 2022 14:42:35 Tony Dinh wrote:
> Hi Pali,
> 
> I noticed that PINCTRL_FULL is default to Y already in Kconfig. Is it
> normal practice to include it in the defconfig anyway?
> 
> ./drivers/pinctrl/Kconfig
> 
> config PINCTRL_FULL
>         bool "Support full pin controllers"
>         depends on PINCTRL && OF_CONTROL
>         default y

Ou, I probably forgot to run make saveconfig. In this case it is not
needed and would be automatically removed after running move config
(which Tom runs periodically for all boards).

Stefan, should I resend this patch? Or do let it as is?

> All the best,
> Tony
> 
> On Wed, Jul 27, 2022 at 11:29 PM Stefan Roese <sr at denx.de> wrote:
> >
> > On 25.07.22 13:56, Pali Rohár wrote:
> > > Signed-off-by: Pali Rohár <pali at kernel.org>
> >
> > Reviewed-by: Stefan Roese <sr at denx.de>
> >
> > Thanks,
> > Stefan
> >
> > > ---
> > >   configs/turris_omnia_defconfig | 4 +++-
> > >   1 file changed, 3 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/configs/turris_omnia_defconfig b/configs/turris_omnia_defconfig
> > > index e2a0449b487b..9b38ba93f767 100644
> > > --- a/configs/turris_omnia_defconfig
> > > +++ b/configs/turris_omnia_defconfig
> > > @@ -72,7 +72,6 @@ CONFIG_NETCONSOLE=y
> > >   CONFIG_SPL_OF_TRANSLATE=y
> > >   CONFIG_AHCI_PCI=y
> > >   CONFIG_AHCI_MVEBU=y
> > > -# CONFIG_MVEBU_GPIO is not set
> > >   CONFIG_DM_PCA953X=y
> > >   CONFIG_MMC_SDHCI=y
> > >   CONFIG_MMC_SDHCI_MV=y
> > > @@ -93,6 +92,9 @@ CONFIG_PCI=y
> > >   CONFIG_PCI_MVEBU=y
> > >   CONFIG_DM_RTC=y
> > >   CONFIG_RTC_ARMADA38X=y
> > > +CONFIG_PINCTRL=y
> > > +CONFIG_PINCTRL_FULL=y
> > > +CONFIG_PINCTRL_ARMADA_38X=y
> > >   CONFIG_SCSI=y
> > >   CONFIG_SPL_DEBUG_UART_BASE=0xd0012000
> > >   CONFIG_DEBUG_UART_SHIFT=2
> >
> > Viele Grüße,
> > Stefan Roese
> >
> > --
> > DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> > Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de