[PULL] u-boot-mips for u-boot/next (v2022.10)

[Weijie Gao]

Hi Daniel,

This is my personal email address.
I found that my previous mail send from my company was still be marked
as spam by gmail.

I've tested the latest fixups on u-boot-mips/next, and all is ok. thx.

Best Regards,
Weijie

Daniel Schwierzeck <daniel.schwierzeck at gmail.com> 于2022年7月10日周日 00:23写道：
>
>
>
> On 09.07.22 14:43, Tom Rini wrote:
> > On Sat, Jul 09, 2022 at 02:01:01PM +0200, Daniel Schwierzeck wrote:
> >> Hi Tom,
> >>
> >> On 08.07.22 18:50, Tom Rini wrote:
> >>> On Fri, Jul 08, 2022 at 05:21:48PM +0200, Daniel SchwierzeckHi Tom, wrote:
> >>>>
> >>>> Gitlab CI:
> >>>>     https://source.denx.de/u-boot/custodians/u-boot-mips/-/pipelines/12656
> >>>>
> >>>> Azure:
> >>>>     https://dev.azure.com/danielschwierzeck/u-boot/_build/results?buildId=30&view=results
> >>>>
> >>>>
> >>>> The following changes since commit 2d2c61ff0460740d9ec5a44dbef9255a8c690696:
> >>>>
> >>>>     Merge tag 'efi-2022-07-rc7' of https://source.denx.de/u-boot/custodians/u-boot-efi (2022-07-06 09:17:08 -0400)
> >>>>
> >>>> are available in the Git repository at:
> >>>>
> >>>>     https://source.denx.de/u-boot/custodians/u-boot-mips.git/ tags/mips-pull-2022-07-08
> >>>>
> >>>> for you to fetch changes up to e5fc4022af3cfd59e3459276305671a595ac5ff0:
> >>>>
> >>>>     MAINTAINERS: update maintainer for MediaTek MIPS platform (2022-07-08 15:13:29 +0200)
> >>>>
> >>>> ----------------------------------------------------------------
> >>>> - MIPS: add drivers and board support for Mediatek MT7621 SoC
> >>>
> >>> OK, we need a few changes here, sorry.  There's now migrated CONFIG
> >>> symbols, most of which are easy to do and I was about to, and then I saw
> >>> this:
> >>> #ifdef CONFIG_TPL_BUILD
> >>> #define CONFIG_SPL_START_S_PATH         "arch/mips/mach-mtmips/mt7621/tpl"
> >>> /* .bss will not be used by TPL */
> >>> #define CONFIG_SPL_BSS_START_ADDR       0x80000000
> >>> #define CONFIG_SPL_BSS_MAX_SIZE         0
> >>> #else
> >>> #define CONFIG_SPL_START_S_PATH         "arch/mips/mach-mtmips/mt7621/spl"
> >>> #define CONFIG_SPL_BSS_START_ADDR       0x80140000
> >>> #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
> >>> #define CONFIG_SPL_MAX_SIZE             0x30000
> >>> #endif
> >>>
> >>> No, you cannot abuse CONFIG_TPL_BUILD to set CONFIG_SPL_foo.  Those need
> >>> to become CONFIG_TPL_foo, and set appropriately.  And then for
> >>> [ST]PL_START_S_PATH, you need to set head-$(CONFIG_ARCH_xxx) to the
> >>> right file, for SPL/TPL instead.
> >>>
> >>
> >> do you already have patches for converting stuff like
> >> CONFIG_SPL_BSS_START_ADDR prepared? Than I would wait with the pull request
> >> until those patches are applied to mainline and I would adapt the MT7621
> >> patches.
> >>
> >> I could also assist with converting CONFIG_SPL_START_S_PATH because that's
> >> only used on MIPS and one ARM board.
> >
> > See what's in -next already?  SPL_BSS_START_ADDR is migrated, but there
> > were no TPL_BSS_START_ADDR cases.  For START_S_PATH, the platform just
> > needs to be reworked as I suggested above I believe, to achieve the
> > desired result.
> >
>
> sorry, didn't check the latest updates in -next and the series was too
> long on the list ;)
>
> TPL_BSS_START_ADDR shouldn't be necessary because MT7621 doesn't use BSS
> in TPL, the defined values where just dummy values.
>
> I rechecked and removed all migrated Kconfig options from mt7621.h and
> pushed an update to u-boot-mips/next. Weijie could you verify that? If
> all is okay, I'll prepare a new pull request, otherwise please send me a
> v7 patch series.
>
> --
> - Daniel



-- 
_______________________________________________
lede-devel mailing list
lede-devel at lists.infradead.org