[PULL] u-boot-mips for u-boot/next (v2022.10)

[Tom Rini]

On Sat, Jul 09, 2022 at 02:01:01PM +0200, Daniel Schwierzeck wrote:
> Hi Tom,
> 
> On 08.07.22 18:50, Tom Rini wrote:
> > On Fri, Jul 08, 2022 at 05:21:48PM +0200, Daniel SchwierzeckHi Tom, wrote:
> > > 
> > > Gitlab CI:
> > >    https://source.denx.de/u-boot/custodians/u-boot-mips/-/pipelines/12656
> > > 
> > > Azure:
> > >    https://dev.azure.com/danielschwierzeck/u-boot/_build/results?buildId=30&view=results
> > > 
> > > 
> > > The following changes since commit 2d2c61ff0460740d9ec5a44dbef9255a8c690696:
> > > 
> > >    Merge tag 'efi-2022-07-rc7' of https://source.denx.de/u-boot/custodians/u-boot-efi (2022-07-06 09:17:08 -0400)
> > > 
> > > are available in the Git repository at:
> > > 
> > >    https://source.denx.de/u-boot/custodians/u-boot-mips.git/ tags/mips-pull-2022-07-08
> > > 
> > > for you to fetch changes up to e5fc4022af3cfd59e3459276305671a595ac5ff0:
> > > 
> > >    MAINTAINERS: update maintainer for MediaTek MIPS platform (2022-07-08 15:13:29 +0200)
> > > 
> > > ----------------------------------------------------------------
> > > - MIPS: add drivers and board support for Mediatek MT7621 SoC
> > 
> > OK, we need a few changes here, sorry.  There's now migrated CONFIG
> > symbols, most of which are easy to do and I was about to, and then I saw
> > this:
> > #ifdef CONFIG_TPL_BUILD
> > #define CONFIG_SPL_START_S_PATH         "arch/mips/mach-mtmips/mt7621/tpl"
> > /* .bss will not be used by TPL */
> > #define CONFIG_SPL_BSS_START_ADDR       0x80000000
> > #define CONFIG_SPL_BSS_MAX_SIZE         0
> > #else
> > #define CONFIG_SPL_START_S_PATH         "arch/mips/mach-mtmips/mt7621/spl"
> > #define CONFIG_SPL_BSS_START_ADDR       0x80140000
> > #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
> > #define CONFIG_SPL_MAX_SIZE             0x30000
> > #endif
> > 
> > No, you cannot abuse CONFIG_TPL_BUILD to set CONFIG_SPL_foo.  Those need
> > to become CONFIG_TPL_foo, and set appropriately.  And then for
> > [ST]PL_START_S_PATH, you need to set head-$(CONFIG_ARCH_xxx) to the
> > right file, for SPL/TPL instead.
> > 
> 
> do you already have patches for converting stuff like
> CONFIG_SPL_BSS_START_ADDR prepared? Than I would wait with the pull request
> until those patches are applied to mainline and I would adapt the MT7621
> patches.
> 
> I could also assist with converting CONFIG_SPL_START_S_PATH because that's
> only used on MIPS and one ARM board.

See what's in -next already?  SPL_BSS_START_ADDR is migrated, but there
were no TPL_BSS_START_ADDR cases.  For START_S_PATH, the platform just
needs to be reworked as I suggested above I believe, to achieve the
desired result.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20220709/84e0fd2a/attachment.sig>